24LC024T-I/MS
Tecnologia Microchip
- Lifecycle
- Active
- Stock
- 3230 PCS
- Package
- MSOP-8
- Series
- Memória
Esta comparação detalhada entre 24LC024T-I/MS e 24LC044T-E/MS fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The 24LC024T-I/MS and 24LC044T-E/MS are both I²C serial EEPROM devices from Microchip Technology with comparable interface and supply requirements, making the 24LC044T-E/MS a viable functional replacement candidate for the 24LC024T-I/MS in many applications. However, designers must account for differences in memory density, operating temperature grade, and package footprint before committing to a drop-in substitution.
Tecnologia Microchip
Tecnologia Microchip
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | 24LC024T-I/MS | 24LC044T-E/MS | Why it matters |
|---|---|---|---|
| Memory Density | 2 Kbit | 4 Kbit | Density determines total storage capacity; a 4 Kbit device stores twice the data of a 2 Kbit device, so they are not directly substitutable for firmware or calibration storage. |
| Memory Organization | 256 x 8 | 512 x 8 | Organization defines the byte/word addressing scheme; different page and address boundaries affect software addressing and write routines. |
| Operating Temperature Range | -40°C to +85°C (Industrial) | -40°C to +125°C (Extended) | The extended temperature grade of the 24LC044T-E/MS allows operation in harsher environments such as automotive or industrial applications where the industrial-grade part may not be qualified. |
| Page Size | 16 bytes | 16 bytes | Page size limits the number of bytes that can be written in a single write cycle; matching page sizes simplifies firmware write routines. |
| Maximum Clock Frequency | 400 kHz | 400 kHz | Clock frequency determines the maximum data transfer rate on the I2C bus; identical values mean comparable throughput. |
| Supply Voltage Range | 2.5 V to 5.5 V | 2.5 V to 5.5 V | Supply voltage range must match the host system rail; identical ranges allow use in the same 2.5 V to 5.5 V designs. |
| Interface Type | I2C (2-wire) | I2C (2-wire) | Interface protocol must match the host controller; both use I2C, so bus compatibility is maintained. |
| Package / Mounting | 8-MSOP, Surface Mount | 8-MSOP, Surface Mount | Package and mounting type must match the PCB footprint; identical MSOP packages allow drop-in board placement. |
| Write Cycle Time (Max) | 5 ms | 5 ms | Write cycle time affects how quickly data can be committed; matching values preserve timing behavior in firmware. |
| Endurance | 1,000,000 write cycles | 1,000,000 write cycles | Endurance indicates how many write/erase cycles the memory can withstand; identical endurance means comparable long-term reliability. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | 24LC024T-I/MS | 24LC044T-E/MS |
|---|---|---|
| Supplier | - | Microchip Technology |
| Part Status | Active | Active |
| Memory Type | Non-Volatile | Non-Volatile |
| Memory Format | EEPROM | EEPROM |
| Technology | EEPROM | EEPROM |
| Memory Size | 2Kb (256 x 8) | 4Kb (256 x 8 x 2) |
| Memory Interface | I²C | I²C |
| Clock Frequency | 400 kHz | 1 MHz |
| Voltage - Supply | 2.5V ~ 5.5V | 2.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 125°C (TA) |
| Mounting Type | Surface Mount | Surface Mount |
| Write Cycle Time - Word Page | 5ms | - |
| Access Time | 900 ns | - |
The 24LC024T-I/MS is a 2 Kbit I2C serial EEPROM organized as 256 x 8 bits, while the 24LC044T-E/MS is a 4 Kbit I2C serial EEPROM organized as 512 x 8 bits. The 24LC024T-I/MS is specified for the industrial temperature range (-40°C to +85°C), whereas the 24LC044T-E/MS is specified for the extended temperature range (-40°C to +125°C). Both devices are offered in the MSOP-8 package.
Yes. Both devices use the standard 8-lead MSOP package with the same I2C pinout: A0, A1, A2 for address selection, VSS, SDA, SCL, WP, and VCC. This allows the same PCB land pattern to accommodate either device.
Not as a direct drop-in replacement without design review. Although the package and pinout are identical, the memory density differs (4 Kbit vs 2 Kbit), which affects the device address byte and the number of addressable memory locations. Firmware that assumes a 2 Kbit address map may not correctly access the full 4 Kbit array of the 24LC044T-E/MS.
Both the 24LC024T-I/MS and the 24LC044T-E/MS operate from a single supply voltage of 2.5 V to 5.5 V, making them suitable for mixed 3.3 V and 5 V logic systems.
Both devices support I2C clock frequencies up to 400 kHz (Fast mode) across their specified voltage and temperature ranges.
The 24LC024T-I/MS is rated for the industrial temperature range of -40°C to +85°C. The 24LC044T-E/MS is rated for the extended temperature range of -40°C to +125°C, making it more suitable for automotive or high-temperature industrial applications.
Yes. Both the 24LC024T-I/MS and the 24LC044T-E/MS provide a WP pin that enables hardware write protection of the entire memory array when tied to VCC, while allowing normal read and write operations when tied to VSS.
Both the 24LC024T-I/MS and the 24LC044T-E/MS support page write operations with a 16-byte page buffer. Exceeding the page boundary during a write cycle causes the address to wrap around within the same page.