74HC00D vs 74HC05D

Esta comparação detalhada entre 74HC00D e 74HC05D fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The 74HC00D and 74HC05D are not functionally interchangeable despite sharing the same 74HC CMOS logic family and SOIC-14 package. The 74HC00D contains four 2-input NAND gates with standard push-pull outputs, while the 74HC05D contains six open-drain inverters. The differences in logic function, channel count, output configuration, and the external pull-up requirement of the open-drain outputs make direct substitution impossible without circuit redesign.

Different logic function Different channel count Different output type External pull-up may be required

Parts at a glance

Part A

74HC00D

Toshiba Semiconductor and Storage

Lifecycle
Active
Stock
4166 PCS
Package
SOIC-14
Series
Lógica - Gates e Inverters
Part B

74HC05D

Toshiba Semiconductor and Storage

Lifecycle
Active
Stock
3327 PCS
Package
SOIC-16
Series
Lógica - Gates e Inverters

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter 74HC00D 74HC05D Why it matters
Logic Function Quad 2-input NAND gate Hex inverter with open-drain outputs The fundamental logic function differs, so the two parts are not functionally interchangeable in a circuit.
Number of Gates 4 6 Different gate counts affect how many independent logic operations can be performed per package.
Output Type Push-pull (CMOS) Open-drain Open-drain outputs require external pull-up resistors and allow wired-OR configurations, unlike push-pull outputs.
Input Configuration 2 inputs per gate 1 input per gate The number of inputs per gate determines the logic operations that can be implemented directly.
Propagation Delay (typical at 5V) ~9 ns ~12 ns Propagation delay affects maximum operating frequency and timing margins in digital circuits.
Output Drive Current ±4 mA (standard CMOS drive) Sink only, limited by external pull-up Drive capability determines fan-out and ability to drive loads such as LEDs or other logic inputs.
Supply Voltage Range 2 V to 6 V 2 V to 6 V Both parts operate over the same supply range, allowing use in similar power environments.
Package SO14 SO14 Identical package and pin count allow the same PCB footprint, though pin functions differ.
Logic Family 74HC 74HC Same logic family ensures compatible input/output voltage thresholds and noise margins.
Pin Function Compatibility NAND gate inputs/outputs on pins 1-3, 4-6, 9-8, 10-11 Inverter inputs/outputs on pins 1-2, 3-4, 5-6, 9-8, 11-10, 13-12 Pin functions differ, so the parts cannot be dropped into the same socket without redesign.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification 74HC00D 74HC05D
Series 74HC 74HC
Part Status Active Active
Logic Type NAND Gate Inverter
Number of Circuits 4 6
Number of Inputs 2 1
Features - Open Drain
Voltage - Supply 2V ~ 6V 2V ~ 6V
Current - Quiescent (Max) 1 µA 1 µA
Current - Output High Low 5.2mA, 5.2mA -, 5.2mA
Logic Level - Low 0.5V ~ 1.8V 0.5V ~ 1.8V
Logic Level - High 1.5V ~ 4.2V 1.5V ~ 4.2V
Max Propagation Delay @ V Max CL 13ns @ 6V, 50pF 15ns @ 6V, 50pF
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the primary functional differences between the 74HC00D and the 74HC05D?

The 74HC00D contains four independent 2-input NAND gates with standard push-pull CMOS outputs. The 74HC05D contains six independent inverters with open-drain outputs, meaning each output requires an external pull-up resistor to define the high logic level.

Are the 74HC00D and 74HC05D pin-compatible in the SO14 package?

No. Although both devices are commonly offered in a 14-pin SO package, their pinouts differ. The 74HC00D uses pins 1, 2, 4, 5, 9, 10, 12, and 13 for gate inputs and pins 3, 6, 8, and 11 for outputs, with pins 7 and 14 for ground and VCC. The 74HC05D uses pins 1, 3, 5, 9, 11, and 13 for inverter inputs and pins 2, 4, 6, 8, 10, and 12 for open-drain outputs, with pins 7 and 14 for ground and VCC.

Can the 74HC05D be used to directly replace a 74HC00D in an existing design?

No. The 74HC05D provides inverting open-drain outputs rather than non-inverting NAND push-pull outputs, has a different pinout, and requires external pull-up resistors. A direct replacement would require logic redesign, pinout adaptation, and pull-up resistor addition, so it is not a drop-in substitute.

What logic function does the 74HC00D implement?

The 74HC00D implements four independent 2-input NAND gates. Each gate output is LOW only when both corresponding inputs are HIGH; otherwise the output is HIGH.

What logic function does the 74HC05D implement?

The 74HC05D implements six independent inverters with open-drain outputs. Each output is pulled LOW when its input is HIGH, and floats when its input is LOW, requiring an external pull-up resistor to achieve a HIGH logic level.

Do both the 74HC00D and 74HC05D operate over the same supply voltage range?

Yes. Both are 74HC-series CMOS devices and are specified for a nominal supply voltage range of 2.0 V to 6.0 V, with 5 V being the most common operating voltage.

Which device is better suited for wired-OR or bus applications?

The 74HC05D is better suited for wired-OR or bus applications because its open-drain outputs can be tied together with a single pull-up resistor to implement a wired-OR function. The 74HC00D has push-pull outputs and cannot have its outputs directly tied together without risking contention.

Are the 74HC00D and 74HC05D available in the same package types?

Both devices are commonly available in SO14 and other standard 14-pin packages such as DIP-14 and TSSOP-14, but the specific package options depend on the manufacturer. Designers should verify the exact orderable part number and package suffix from the manufacturer datasheet.