74HCT08D vs 74HCT14D

Esta comparação detalhada entre 74HCT08D e 74HCT14D fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The 74HCT14D and 74HCT08D are not functionally interchangeable despite sharing the same 74HCT logic family, SO-14 package, and supply voltage range. The 74HCT14D is a hex inverting Schmitt-trigger device with hysteresis, while the 74HCT08D is a quad 2-input AND gate with standard CMOS input thresholds. Their differing logic functions, channel counts, input characteristics, and output drive capabilities make direct substitution impossible without circuit redesign.

Different logic function Different channel count Different input threshold Different output drive

Parts at a glance

Part A

74HCT08D

Toshiba Semiconductor and Storage

Lifecycle
Active
Stock
6154 PCS
Package
SOIC-14
Series
Lógica - Gates e Inverters
Part B

74HCT14D

Toshiba Semiconductor and Storage

Lifecycle
Active
Stock
6342 PCS
Package
SOIC-14
Series
Lógica - Gates e Inverters

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter 74HCT14D 74HCT08D Why it matters
Logic Function Hex inverting Schmitt trigger Quad 2-input AND gate Defines the fundamental logic operation; the two devices are not functionally interchangeable.
Number of Gates/Channels 6 4 Determines how many independent signal paths are available in a single package.
Number of Inputs per Gate 1 2 Affects the logic capability and pin usage of each gate in the circuit.
Input Type Schmitt trigger Standard CMOS/TTL-compatible Schmitt trigger inputs provide hysteresis for noise immunity and slow signal edges, which standard inputs lack.
Output Type Inverting Non-inverting Determines the polarity of the output relative to the input signal.
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V Defines the operating voltage window; both are 5 V TTL-compatible HCT devices.
Logic Family HCT HCT Ensures TTL-level input compatibility and similar drive characteristics.
Package SO14 SO14 Same footprint allows drop-in board placement compatibility.
Mounting Type Surface mount Surface mount Both are SMD devices suitable for the same assembly processes.
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C Confirms both parts are rated for industrial temperature environments.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification 74HCT08D 74HCT14D
Series 74HCT 74HCT
Part Status Obsolete Active
Logic Type AND Gate Inverter
Number of Circuits 4 6
Number of Inputs 2 1
Voltage - Supply 4.5V ~ 5.5V 4.5V ~ 5.5V
Current - Quiescent (Max) 1 µA 1 µA
Current - Output High Low 4mA, 4mA 4mA, 4mA
Logic Level - Low 0.8V -
Logic Level - High 2V -
Max Propagation Delay @ V Max CL 18ns @ 5.5V, 50pF 31ns @ 5.5V, 50pF
Operating Temperature -40°C ~ 85°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount
Features - Schmitt Trigger

Frequently asked questions

What are the primary functional differences between the 74HCT14D and the 74HCT08D?

The 74HCT14D contains six independent Schmitt-trigger inverters, providing hysteresis for slow or noisy input signals. The 74HCT08D contains four independent 2-input AND gates with standard CMOS input thresholds. They are not functionally interchangeable because one inverts and shapes signals while the other performs logical AND operations.

Are the 74HCT14D and 74HCT08D pin-compatible in the SO14 package?

No. Although both devices are commonly offered in a 14-pin SO package, their pin functions differ. The 74HCT14D uses all 14 pins for six inverters (VCC on pin 14, GND on pin 7, with 12 signal pins). The 74HCT08D uses 4 AND gates, with VCC on pin 14, GND on pin 7, and the remaining pins assigned to gate inputs and outputs. A direct drop-in replacement is not possible without verifying the specific pinout in the manufacturer datasheet.

Can the 74HCT14D be used to debounce a mechanical switch, and can the 74HCT08D perform the same function?

The 74HCT14D is suitable for switch debouncing because its Schmitt-trigger inputs provide defined hysteresis thresholds, which clean up slow rising and falling edges. The 74HCT08D does not have Schmitt-trigger inputs, so it is not recommended for direct mechanical switch debouncing without additional external circuitry.

Do both the 74HCT14D and 74HCT08D operate with TTL-compatible input thresholds?

Yes. Both are members of the 74HCT family, which features TTL-compatible input voltage thresholds when operated at 5 V. This allows them to interface with TTL logic levels while providing CMOS output drive characteristics. Exact threshold values should be confirmed in the respective manufacturer datasheet.

What are the typical propagation delays for the 74HCT14D and 74HCT08D?

Typical propagation delay for the 74HCT14D is approximately 11 ns to 19 ns depending on supply voltage and load, while the 74HCT08D typically exhibits propagation delays in the range of 10 ns to 18 ns under similar conditions. These values vary by manufacturer and operating conditions, so the specific datasheet must be consulted for guaranteed limits.

Can the 74HCT14D and 74HCT08D be powered from the same 5 V supply in a mixed design?

Yes. Both devices are specified for a nominal 5 V supply and are compatible with the 74HCT logic family. They can share the same regulated 5 V rail provided that decoupling capacitors are placed near each device and the total load current remains within the supply's capability.

Are the 74HCT14D and 74HCT08D available in identical package options?

Both are commonly available in SO14 (D) packages, as indicated by the "D" suffix. However, availability may differ by manufacturer and distributor. Package options such as TSSOP, DIP, or other variants may exist for one device but not the other, so the specific orderable part number should be verified with the manufacturer or authorized distributor.