ACPL-C87A-500E
Broadcom Limited
- Lifecycle
- Active
- Stock
- 7176 PCS
- Package
- SSO-8
- Series
- Linear - Amplificadores - Instrumentação, OP Amps, Buffer Amps
Esta comparação detalhada entre ACPL-C87A-500E e ACPL-C780-560E fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The ACPL-C87A-500E and ACPL-C780-560E are both isolated analog-to-digital converter optocouplers from Broadcom with matching 16-bit sigma-delta architecture, 5 V supply, and SO-8 package, making the ACPL-C87A-500E a viable functional replacement candidate for the ACPL-C780-560E in most isolated current and voltage sensing applications. However, designers must validate the tighter gain tolerance, higher isolation working voltage, and differing input signal range of the ACPL-C87A-500E against the specific system requirements before committing to a drop-in substitution.
Broadcom Limited
Broadcom Limited
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ACPL-C87A-500E | ACPL-C780-560E | Why it matters |
|---|---|---|---|
| Manufacturer | Broadcom | Broadcom | Same manufacturer ensures consistent quality and support. |
| Product Category | Isolation Amplifiers | Isolation Amplifiers | Both are isolation amplifiers, indicating functional similarity. |
| Number of Channels | 1 | 1 | Single-channel configuration affects circuit design and channel density. |
| Isolation Voltage | 5000 Vrms | 5000 Vrms | Higher isolation voltage provides better safety and noise immunity in high-voltage applications. |
| Input Offset Voltage | ±0.5 mV | ±3 mV | Lower offset voltage improves accuracy in precision measurement applications. |
| Gain Error | ±0.5% | ±1% | Lower gain error ensures more accurate signal amplification. |
| Bandwidth | 100 kHz | 100 kHz | Bandwidth determines the maximum frequency the amplifier can accurately process. |
| Operating Temperature Range | -40°C to +105°C | -40°C to +85°C | Wider temperature range allows operation in more demanding environments. |
| Package / Case | 8-SOIC (0.295", 7.50mm Width) | 8-SOIC (0.295", 7.50mm Width) | Package compatibility affects PCB layout and assembly. |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | Supply voltage range must match the system power rails. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ACPL-C87A-500E | ACPL-C780-560E |
|---|---|---|
| Supplier | - | Broadcom Limited |
| Part Status | Active | Active |
| Amplifier Type | Isolation | Isolation |
| Number of Circuits | 1 | 1 |
| Output Type | Differential | Differential |
| -3 dB Bandwidth | 100 kHz | 100 kHz |
| Voltage - Input Offset | 300 µV | 300 µV |
| Supply Current | 10.5mA | 11mA |
| Current - Output / Channel | 30 mA | 18.6 mA |
| Voltage - Supply Span(Min) | 3 V | 4.5 V |
| Voltage - Supply Span(Max) | 5.5 V | 5.5 V |
| Operating Temperature | -40°C ~ 105°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Current - Input Bias | 1.5 nA | - |
The ACPL-C87A-500E is a precision optically isolated amplifier designed for voltage sensing with a ±0.5% gain tolerance and 1.5 µV/°C offset drift, while the ACPL-C780-560E is an optically isolated error amplifier intended for feedback and regulation loops in switch-mode power supplies, with a ±1% gain tolerance and 10 µV/°C offset drift. The C87A targets isolated voltage sensing, whereas the C780 targets isolated error amplification and feedback control.
No. The ACPL-C87A-500E is supplied in a 5-lead SO-8 package, while the ACPL-C780-560E is supplied in an 8-lead DIP-8 package. The package types, pin counts, and pin functions differ, so they are not drop-in replacements for each other.
The ACPL-C87A-500E has a nominal input voltage range of ±200 mV with a recommended full-scale input of ±200 mV. The ACPL-C780-560E has a nominal input voltage range of ±200 mV as well, but its input configuration and internal gain stage are optimized for error amplifier applications rather than precision voltage sensing.
Both the ACPL-C87A-500E and ACPL-C780-560E are rated for 5 kVrms isolation for 1 minute per UL 1577. The ACPL-C87A-500E also carries IEC/EN/DIN EN 60747-5-5 approval with a working voltage of 891 Vpeak, while the ACPL-C780-560E carries the same 5 kVrms UL rating but its IEC/EN/DIN EN 60747-5-5 working voltage is 630 Vpeak.
The ACPL-C87A-500E is better suited for isolated voltage sensing in motor drive and inverter applications because it is specifically characterized for voltage sensing with low offset drift (1.5 µV/°C), high gain accuracy (±0.5%), and a signal bandwidth of 100 kHz. The ACPL-C780-560E is intended for error amplifier and feedback loop applications and does not provide the same level of precision voltage sensing performance.
Both the ACPL-C87A-500E and ACPL-C780-560E are specified for an operating temperature range of –40 °C to +105 °C. This range is consistent across both parts and is suitable for industrial and automotive-grade environments when used within the specified supply and input conditions.
No. The ACPL-C780-560E is an error amplifier with a different internal topology, different gain and offset specifications, and a different package (DIP-8 vs SO-8). Substituting it for the ACPL-C87A-500E in a voltage sensing circuit would require redesign of the input network, compensation, and PCB layout, and would not meet the same accuracy and drift performance.
The ACPL-C87A-500E operates from a single 5 V supply on the input side and a 3.0 V to 5.5 V supply on the output side. The ACPL-C780-560E operates from a 5 V supply on the input side and a 3.0 V to 5.5 V supply on the output side. Both parts require external bypass capacitors as specified in the respective datasheets.
The ACPL-C87A-500E offers better gain accuracy and offset drift for precision isolated measurement, with a gain tolerance of ±0.5% and offset drift of 1.5 µV/°C. The ACPL-C780-560E has a gain tolerance of ±1% and offset drift of 10 µV/°C, making it less suitable for high-precision voltage sensing applications.