AD4115BCPZ-RL7
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 4071 PCS
- Package
- VFQFN-40
- Series
- Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Esta comparação detalhada entre AD4115BCPZ-RL7 e AD4114BCPZ fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The AD4114BCPZ and AD4115BCPZ-RL7 are functionally compatible candidates for replacement, sharing identical package, pin count, and core architecture. Both are 24-bit sigma-delta ADCs with integrated analog front ends, differing primarily in input channel count and throughput rate. Designers should validate channel requirements and sampling rate needs before substituting, as the AD4115 offers higher channel density and faster output data rates than the AD4114.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD4114BCPZ | AD4115BCPZ-RL7 | Why it matters |
|---|---|---|---|
| Number of Input Channels | 8 single-ended / 4 differential | 16 single-ended / 8 differential | Determines how many analog signals can be measured simultaneously, directly affecting system channel density and whether the part can substitute in multi-channel designs. |
| Resolution | 24-bit | 24-bit | Both provide 24-bit resolution, so measurement precision is equivalent and not a barrier to substitution. |
| Maximum Sample Rate | 31.25 kSPS | 125 kSPS | Higher throughput enables faster data acquisition; a slower device may bottleneck high-speed control loops or multiplexed measurement systems. |
| Input Voltage Range | ±10 V | ±10 V | Matching input ranges means both can interface with the same industrial signal levels without additional conditioning circuitry. |
| Interface Type | SPI | SPI | Identical serial interface simplifies firmware and hardware compatibility when swapping between the two devices. |
| Supply Voltage (Analog) | 4.5 V to 5.5 V | 4.5 V to 5.5 V | Same analog supply requirements allow reuse of existing power rails and decoupling networks. |
| Package | 40-Lead LFCSP (6x6 mm) | 40-Lead LFCSP (6x6 mm) | Identical footprint and package enable drop-in PCB compatibility without layout changes. |
| Operating Temperature Range | -40°C to +105°C | -40°C to +105°C | Equivalent temperature ratings ensure both parts suit the same industrial and harsh-environment applications. |
| Integrated Features | PGA, voltage reference, sequencer | PGA, voltage reference, sequencer | Shared on-chip signal conditioning reduces external component count and preserves system-level design compatibility. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD4115BCPZ-RL7 | AD4114BCPZ |
|---|---|---|
| Part Status | Active | Active |
| Number of Bits | 24 | 24 |
| Sampling Rate(Per Second) | 125k | 31.25k |
| Number of Inputs | 8, 16 | 8, 16 |
| Input Type | Differential, Single Ended | Differential, Single Ended |
| Data Interface | DSP, MICROWIRE™, QSPI™, and SPI™ | DSP, MICROWIRE™, QSPI™, and SPI™ |
| Configuration | MUX-ADC | MUX-ADC |
| Ratio - S / H: ADC | 0:1 | 0:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | Sigma-Delta |
| Reference Type | External, Internal | External, Internal |
| Voltage - Supply, Analog | 4.5V ~ 5.5V | 3V ~ 5.5V |
| Voltage - Supply, Digital | 2V ~ 5.5V | 2V ~ 5.5V |
| Features | Temperature Sensor | Temperature Sensor |
| Operating Temperature | -40°C ~ 105°C | -40°C ~ 105°C |
The AD4114BCPZ is a 24-bit sigma-delta ADC with ±10 V inputs, 8 differential or 16 single-ended channels, and a maximum output data rate of 31.25 kSPS. The AD4115BCPZ-RL7 is a 24-bit sigma-delta ADC with ±10 V inputs, 8 differential or 16 single-ended channels, and a maximum output data rate of 125 kSPS. The AD4115 also offers a faster maximum output data rate and is supplied in a 40-lead LFCSP package in tape and reel packaging, while the AD4114BCPZ is supplied in a 40-lead LFCSP tray.
Yes, both devices are offered in the same 40-lead LFCSP package with identical pin functions, allowing for a direct PCB layout drop-in replacement when the faster output data rate of the AD4115 is required.
In most cases, yes, because both devices share the same register map and SPI interface. However, the AD4115 supports a higher maximum output data rate, so firmware that relies on the AD4114's maximum rate of 31.25 kSPS will still function but will not benefit from the AD4115's faster 125 kSPS capability unless the configuration registers are updated.
The AD4114BCPZ has a maximum output data rate of 31.25 kSPS. The AD4115BCPZ-RL7 has a maximum output data rate of 125 kSPS.
Yes, both the AD4114BCPZ and AD4115BCPZ-RL7 support ±10 V analog input ranges, as well as other programmable gain settings, making them suitable for industrial process control and instrumentation applications.
Both devices are housed in a 40-lead LFCSP package. The AD4114BCPZ is typically supplied in a tray, while the AD4115BCPZ-RL7 is supplied in tape and reel packaging, which is suitable for automated pick-and-place assembly lines.
The AD4115BCPZ-RL7 is better suited for high-speed data acquisition because its maximum output data rate of 125 kSPS is four times faster than the AD4114BCPZ's 31.25 kSPS, allowing faster sampling of analog signals without compromising resolution.
Yes, for low-speed precision measurements both devices provide 24-bit resolution and similar noise performance. The AD4114BCPZ is fully sufficient when the required output data rate is at or below 31.25 kSPS, while the AD4115BCPZ-RL7 offers additional headroom for faster measurements.