AD5252BRUZ1-RL7 vs AD5251BRU1

Esta comparação detalhada entre AD5252BRUZ1-RL7 e AD5251BRU1 fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD5251BRU1 and AD5252BRUZ1-RL7 share the same dual-channel digital potentiometer architecture, 10 kΩ end-to-end resistance, I²C interface, and TSSOP-14 footprint, making the AD5251BRU1 a viable functional substitute for the AD5252BRUZ1-RL7 in most designs. However, the AD5251 offers 64-position resolution versus 256 positions on the AD5252, and the AD5252 provides nonvolatile EEMEM storage for wiper settings that the AD5251 lacks. Designers must validate resolution-sensitive applications and any reliance on nonvolatile wiper recall before committing to this substitution.

Resolution Validation required
Nonvolatile Memory Not compatible
Interface Type High match
Package Type High match

Parts at a glance

Part B

AD5251BRU1

Analog Devices Inc.

Lifecycle
Active
Stock
9098 PCS
Package
TSSOP-14
Series
Acquisição de dados - Potenciômetros Digitais

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD5252BRUZ1-RL7 AD5251BRU1 Why it matters
Number of Positions 256 64 Determines the resolution of the digital potentiometer; a 256-position device offers finer adjustment steps than a 64-position device, affecting precision in calibration and control loops.
Number of Taps 256 64 The number of taps defines the discrete resistance settings available, directly impacting the achievable wiper resolution and monotonicity of the potentiometer.
Resistance Value 1 kΩ 10 kΩ The end-to-end resistance affects the current handling, power dissipation, and the RC time constants in the circuit; substituting a different value can alter signal levels and timing.
Interface Type I²C Up/Down (3-wire) The communication protocol determines how the host controller configures the device; I²C and up/down interfaces are not pin-compatible and require different firmware and wiring.
Memory Type Non-Volatile (EEPROM) Volatile Non-volatile memory retains the wiper setting after power loss, while volatile memory resets to a default position, affecting system startup behavior and the need for re-initialization.
Package / Mounting 14-TSSOP (Surface Mount) 14-TSSOP (Surface Mount) Package and mounting type must match the PCB footprint and assembly process; both being 14-TSSOP allows potential board-level compatibility if pinouts align.
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V The operating voltage range must be compatible with the system power rails; identical ranges simplify power supply design and ensure similar logic-level compatibility.
Operating Temperature Range -40°C to +105°C -40°C to +85°C The temperature range defines the environments in which the device can reliably operate; a wider range supports harsher industrial or automotive applications.
Wiper Resistance ~50 Ω (typical) ~50 Ω (typical) Wiper resistance adds to the set resistance and can cause errors, especially at low resistance settings; similar values ensure comparable accuracy in voltage divider or rheostat modes.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD5252BRUZ1-RL7 AD5251BRU1
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Obsolete
Taper Linear Linear
Configuration Potentiometer Potentiometer
Number of Circuits 2 2
Number of Taps 256 64
Resistance(Ohms) 1k 1k
Interface I²C I²C
Memory Type Non-Volatile Non-Volatile
Voltage - Supply 2.7V ~ 5.5V, ±2.25V ~ 2.75V 2.7V ~ 5.5V, ±2.25V ~ 2.75V
Features Selectable Address Selectable Address
Tolerance ±30% ±30%
Temperature Coefficient(Typ) 650ppm/°C 650ppm/°C
Mounting Type Surface Mount Surface Mount
Operating Temperature -40°C ~ 105°C -40°C ~ 105°C

Frequently asked questions

What are the key differences between the AD5252BRUZ1-RL7 and the AD5251BRU1?

The AD5252BRUZ1-RL7 is a dual-channel, 256-position digital potentiometer, while the AD5251BRU1 is a single-channel, 64-position digital potentiometer. The AD5252 offers two independent variable resistors, whereas the AD5251 provides only one. Additionally, the AD5252 has 8 bits of resolution (256 positions), and the AD5251 has 6 bits (64 positions). Both are nonvolatile, I2C-compatible digital potentiometers from Analog Devices.

Are the AD5252BRUZ1-RL7 and AD5251BRU1 pin-compatible?

No. The AD5252BRUZ1-RL7 is supplied in a 14-lead TSSOP package, while the AD5251BRU1 is supplied in a 10-lead MSOP package. The different package sizes and pin counts mean they are not pin-compatible and cannot be used as drop-in replacements without PCB redesign.

What is the end-to-end resistance of the AD5252BRUZ1-RL7 and the AD5251BRU1?

The AD5252BRUZ1-RL7 is available in 1 kΩ, 10 kΩ, 50 kΩ, and 100 kΩ end-to-end resistance options. The AD5251BRU1 is available in 10 kΩ, 50 kΩ, and 100 kΩ options. The specific resistance value is indicated by the part number suffix and must be confirmed from the ordering guide in the respective datasheets.

Do both devices support nonvolatile memory storage of the wiper setting?

Yes. Both the AD5252 and AD5251 are nonvolatile digital potentiometers that retain the wiper setting after power is removed. They store the wiper position in on-chip EEPROM, which is restored automatically at power-up. This is a key feature of both devices.

What is the I2C interface speed of the AD5252BRUZ1-RL7 and the AD5251BRU1?

Both devices support a 2-wire I2C-compatible serial interface. The AD5252 supports standard mode (100 kHz) and fast mode (400 kHz). The AD5251 also supports standard and fast mode I2C. Both can be addressed via hardware pins, allowing multiple devices on the same bus.

Can the AD5251BRU1 be used as a direct substitute for the AD5252BRUZ1-RL7 in an existing design?

No. The AD5251BRU1 is a single-channel, 64-position device in a 10-lead MSOP package, while the AD5252BRUZ1-RL7 is a dual-channel, 256-position device in a 14-lead TSSOP package. They differ in channel count, resolution, package, and pinout. A direct substitution is not possible without significant hardware and software changes.

What are the typical applications for the AD5252BRUZ1-RL7 and AD5251BRU1?

Both devices are used for digital volume control, LCD panel brightness and contrast adjustment, programmable power supplies, gain and offset adjustment in signal conditioning, and mechanical potentiometer replacement. The AD5252 is preferred where two independent channels are needed, while the AD5251 suits space-constrained single-channel applications.

What is the operating temperature range for the AD5252BRUZ1-RL7 and AD5251BRU1?

Both devices are specified for the industrial temperature range of −40°C to +105°C. This is a standard specification for the AD5251/AD5252 family and is confirmed in the Analog Devices datasheets.