AD5252BRUZ1
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 4418 PCS
- Package
- TSSOP-14
- Series
- Acquisição de dados - Potenciômetros Digitais
Esta comparação detalhada entre AD5252BRUZ1 e AD5253BRU50-RL7 fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The AD5252BRUZ1 and AD5253BRU50-RL7 are not drop-in replacements for each other. They differ in channel count, end-to-end resistance, and interface protocol, requiring circuit redesign and firmware modification before substitution.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD5252BRUZ1 | AD5253BRU50-RL7 | Why it matters |
|---|---|---|---|
| Number of Positions | 256 | 64 | Determines the wiper resolution; a 256-position device offers finer adjustment granularity than a 64-position device. |
| Number of Channels | 2 | 4 | Indicates how many independent potentiometer channels are available in a single package, affecting circuit density and channel count requirements. |
| End-to-End Resistance | 1 kΩ | 50 kΩ | Sets the nominal resistance range of the potentiometer, which must match the impedance requirements of the surrounding circuit. |
| Interface Type | I²C | I²C | Defines the digital communication protocol used to control the device; both use I²C, so host controller compatibility is maintained. |
| Nonvolatile Memory | Yes (EEPROM) | Yes (EEPROM) | Determines whether the wiper setting is retained after power loss, which is critical for applications requiring a known startup state. |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | Specifies the operating voltage range; matching ranges ensure compatibility with the same power supply rails. |
| Package Type | 14-Lead TSSOP | 20-Lead TSSOP | Affects PCB footprint and layout; different pin counts and body sizes require different board designs. |
| Operating Temperature Range | -40°C to +105°C | -40°C to +105°C | Defines the environmental conditions under which the device is guaranteed to operate reliably. |
| Wiper Resistance | ~50 Ω (typical) | ~50 Ω (typical) | Adds a fixed series resistance in the signal path; lower values reduce signal attenuation and loading effects. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD5252BRUZ1 | AD5253BRU50-RL7 |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Taper | Linear | Linear |
| Configuration | Potentiometer | Potentiometer |
| Number of Circuits | 2 | 4 |
| Number of Taps | 256 | 64 |
| Resistance(Ohms) | 1k | 50k |
| Interface | I²C | I²C |
| Memory Type | Non-Volatile | Non-Volatile |
| Voltage - Supply | 2.7V ~ 5.5V, ±2.25V ~ 2.75V | 2.7V ~ 5.5V, ±2.25V ~ 2.75V |
| Features | Selectable Address | Selectable Address |
| Tolerance | ±30% | ±20% |
| Temperature Coefficient(Typ) | 650ppm/°C | 650ppm/°C |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40°C ~ 105°C | -40°C ~ 105°C |
The AD5252BRUZ1 is a dual-channel, 8-bit digital potentiometer with a 1 kΩ end-to-end resistance, while the AD5253BRU50-RL7 is a quad-channel, 6-bit digital potentiometer with a 50 kΩ end-to-end resistance. The AD5252 offers higher resolution (256 positions per channel) compared to the AD5253 (64 positions per channel), but the AD5253 provides twice as many channels.
No. The AD5252BRUZ1 is supplied in a 14-lead TSSOP package, while the AD5253BRU50-RL7 is supplied in a 20-lead TSSOP package. The different pin counts and pin functions prevent direct PCB footprint compatibility.
The AD5252BRUZ1 provides 8-bit resolution with 256 positions per channel. The AD5253BRU50-RL7 provides 6-bit resolution with 64 positions per channel.
The AD5252BRUZ1 has a 1 kΩ nominal end-to-end resistance. The AD5253BRU50-RL7 has a 50 kΩ nominal end-to-end resistance. Both devices typically offer ±30% resistance tolerance as specified in the manufacturer datasheets.
Both devices use a 2-wire I²C-compatible serial interface for programming and control.
Both the AD5252BRUZ1 and AD5253BRU50-RL7 operate from a single 2.7 V to 5.5 V supply, or from dual ±2.5 V supplies, as specified in the Analog Devices datasheets.
No. The devices differ in channel count (2 vs. 4), resolution (8-bit vs. 6-bit), end-to-end resistance (1 kΩ vs. 50 kΩ), and package (14-lead vs. 20-lead TSSOP). A direct drop-in replacement is not possible without redesigning the circuit and PCB layout.
The AD5252BRUZ1 is typically used in applications requiring higher resolution and lower resistance, such as fine gain adjustment and offset trimming in dual-channel signal paths. The AD5253BRU50-RL7 is typically used in multi-channel applications requiring four independent potentiometer settings, such as programmable filters and sensor calibration, where 6-bit resolution is sufficient.