AD5262BRUZ20-RL7
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 2539 PCS
- Package
- TSSOP-16
- Series
- Acquisição de dados - Potenciômetros Digitais
Esta comparação detalhada entre AD5262BRUZ20-RL7 e AD5263BRU200 fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The AD5262BRUZ20-RL7 and AD5263BRU200 are both quad-channel digital potentiometers from Analog Devices, but they differ in resolution, nominal resistance, and interface configuration. The AD5263BRU200 offers higher resolution and a different end-to-end resistance, making it a functional candidate only after validating the required wiper settings and digital interface timing for the target application.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD5262BRUZ20-RL7 | AD5263BRU200 | Why it matters |
|---|---|---|---|
| Number of Channels | 2 | 4 | Determines how many independent potentiometer channels are available in a single package, directly affecting circuit density and channel count requirements. |
| End-to-End Resistance | 20 kΩ | 200 kΩ | Sets the nominal resistance range, which must match the impedance requirements of the surrounding signal chain for proper operation. |
| Resolution | 8-bit (256 positions) | 8-bit (256 positions) | Defines the number of wiper tap positions and thus the adjustment granularity of the digital potentiometer. |
| Interface Type | SPI | I2C | The digital control bus must be compatible with the host controller; SPI and I2C are not directly interchangeable without protocol changes. |
| Package / Case | 16-TSSOP | 16-TSSOP | Physical footprint and pinout must match the PCB layout for a drop-in replacement. |
| Supply Voltage Range | 4.5 V to 16.5 V (single) / ±2.25 V to ±8.25 V (dual) | 4.5 V to 16.5 V (single) / ±2.25 V to ±8.25 V (dual) | Operating voltage must be compatible with the system power rails to ensure correct biasing and signal swing. |
| Wiper Current | ±1 mA (typical) | ±1 mA (typical) | Limits the current the wiper can source or sink, affecting the load the potentiometer can drive. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Ensures the device operates reliably within the intended environmental conditions of the application. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD5262BRUZ20-RL7 | AD5263BRU200 |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Taper | Linear | Linear |
| Configuration | Potentiometer | Potentiometer |
| Number of Circuits | 2 | 4 |
| Number of Taps | 256 | 256 |
| Resistance(Ohms) | 20k | 200k |
| Interface | SPI | I²C, SPI |
| Memory Type | Volatile | Volatile |
| Voltage - Supply | 4.5V ~ 16.5V, ±5V | 4.5V ~ 16.5V, ±4.5V ~ 7.5V |
| Features | Cascade Pin | Cascade Pin, Selectable Address |
| Tolerance | ±30% | ±30% |
| Temperature Coefficient(Typ) | 35ppm/°C | 30ppm/°C |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 125°C |
The AD5262BRUZ20-RL7 is a dual-channel, 20 kΩ digital potentiometer with 256 positions, while the AD5263BRU200 is a quad-channel, 200 kΩ digital potentiometer with 256 positions. The AD5262 offers two independent channels in a 16-lead TSSOP package, whereas the AD5263 provides four independent channels in a 24-lead TSSOP package. Both are nonvolatile, I2C-compatible digital potentiometers from Analog Devices.
No. The AD5262BRUZ20-RL7 is supplied in a 16-lead TSSOP, and the AD5263BRU200 is supplied in a 24-lead TSSOP. They have different pin counts, pin functions, and PCB land patterns, so they are not drop-in replacements for each other.
No. Because they differ in channel count, end-to-end resistance, package size, and pinout, a circuit designed for one cannot directly accept the other without schematic and layout changes. The AD5262 provides two 20 kΩ channels, while the AD5263 provides four 200 kΩ channels, so the required resistor value and channel count must match the application.
The AD5262BRUZ20-RL7 has a 20 kΩ end-to-end resistance. The AD5263BRU200 has a 200 kΩ end-to-end resistance. These values are specified in the respective Analog Devices datasheets and determine the wiper resistance range and power dissipation in the target circuit.
The AD5262BRUZ20-RL7 provides two independent digital potentiometer channels. The AD5263BRU200 provides four independent digital potentiometer channels. This difference affects the number of controllable resistance elements available in a design.
Yes. Both the AD5262 and AD5263 families use a 2-wire I2C-compatible serial interface for programming the wiper position. However, the command set and register map should be verified against the specific datasheet because the channel count differs.
The AD5262BRUZ20-RL7 is typically used where two 20 kΩ digitally controlled resistance channels are needed, such as gain adjustment or offset trimming in dual-channel signal paths. The AD5263BRU200 is used where four 200 kΩ channels are required, such as multi-channel calibration or programmable resistance networks in industrial and instrumentation systems. Final selection depends on channel count, resistance value, and package size.
Yes. Both devices are nonvolatile digital potentiometers, meaning the wiper setting is retained after power is removed. This is a key feature of the AD5262 and AD5263 families from Analog Devices.