AD534TD vs AD534KD

Esta comparação detalhada entre AD534TD e AD534KD fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD534TD and AD534KD are functionally equivalent analog multipliers from the same AD534 series, sharing identical transfer characteristics, package footprint, and operating temperature range. The AD534TD offers superior accuracy and is the preferred choice for precision applications, while the AD534KD provides a cost-effective alternative where slightly relaxed accuracy tolerances are acceptable. Both devices are pin-compatible and can be interchanged in most circuit designs without modification.

Function Type High match
Package Type High match
Accuracy Grade Validation required
Operating Temperature High match

Parts at a glance

Part A

AD534TD

Analog Devices Inc.

Lifecycle
Active
Stock
7469 PCS
Series
Linear - Multiplicadores analógicos, Divideres
Part B

AD534KD

Analog Devices Inc.

Lifecycle
Active
Stock
5365 PCS
Package
CDIP-14
Series
Linear - Multiplicadores analógicos, Divideres

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD534TD AD534KD Why it matters
Operating Temperature Range -55°C to +125°C 0°C to +70°C The TD grade is specified over the full military temperature range, while the KD grade is a commercial-temperature part; this affects suitability for harsh or military environments.
Temperature Grade / Screening Military/industrial grade (extended temp, screened) Commercial grade Screened military-grade parts undergo additional testing and qualification, which impacts reliability, documentation, and cost for critical applications.
Package / Case TO-116 / 14-pin ceramic DIP (hermetic) 14-pin plastic DIP Hermetic ceramic packaging offers better moisture resistance and thermal performance than plastic, which matters for long-term reliability in demanding environments.
Total Error (max, 25°C) ±0.25% (TD grade) ±0.25% (KD grade) Although both grades share a similar 25°C error specification, the TD grade guarantees this accuracy over the full military temperature range, whereas the KD grade does not.
Error Over Temperature Specified and guaranteed over -55°C to +125°C Specified over 0°C to +70°C only Guaranteed error over the full temperature range is critical for precision analog computation in applications exposed to temperature extremes.
Supply Voltage Range ±8 V to ±18 V (dual supply) ±8 V to ±18 V (dual supply) Both parts share the same supply range, so power-supply design is compatible between the two grades.
Function Analog multiplier/divider Analog multiplier/divider Both devices perform the same core analog computation function, making them functionally substitutable when temperature grade is not a constraint.
Input Offset Voltage (max) ±1.0 mV (TD grade, 25°C) ±1.0 mV (KD grade, 25°C) Offset voltage directly affects multiplication accuracy; matching values at 25°C means DC accuracy is comparable at room temperature.
Nonlinearity (max) ±0.25% of full scale ±0.25% of full scale Nonlinearity determines distortion in signal processing; identical specs mean both grades perform equivalently in linearity-critical applications at rated conditions.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD534TD AD534KD
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Discontinued at DigiKey Obsolete
Function Analog Multiplier/Divider Analog Multiplier/Divider
Number of Bits / Stages 4-Quadrant 4-Quadrant
Base Product Number AD534 -
Packaging Tube -

Frequently asked questions

What are the primary differences between the AD534TD and AD534KD analog multipliers?

The AD534TD and AD534KD are both precision analog multipliers from Analog Devices, but they differ in their specified operating temperature range and corresponding accuracy grades. The AD534TD is specified for the extended industrial/military temperature range of -55°C to +125°C, while the AD534KD is specified for the commercial temperature range of 0°C to +70°C. This affects parameters such as input offset voltage, output offset voltage, and total error over temperature.

Are the AD534TD and AD534KD pin-compatible and package-compatible?

Yes. Both the AD534TD and AD534KD are available in the same 14-pin hermetic side-brazed ceramic dual in-line package (DIP) with identical pinout. The package dimensions and pin functions are the same, allowing for physical interchangeability on a PCB designed for either part.

Can the AD534KD be used as a direct substitute for the AD534TD in an existing design?

Not directly without validation. Although the parts are pin-compatible, the AD534KD has a narrower specified operating temperature range (0°C to +70°C) compared to the AD534TD (-55°C to +125°C). If the application requires operation outside the commercial range or tighter accuracy over temperature, the AD534KD may not meet the required performance. The design must be validated against the AD534KD datasheet specifications for the intended operating conditions.

What is the total error specification for the AD534TD versus the AD534KD?

According to the Analog Devices AD534 datasheet, the AD534TD (T grade) has a maximum total error of ±1.0% of full scale at +25°C, while the AD534KD (K grade) has a maximum total error of ±0.25% of full scale at +25°C. Over temperature, the AD534TD total error is specified as ±2.0% maximum, whereas the AD534KD is specified as ±0.5% maximum over its narrower temperature range.

Do the AD534TD and AD534KD have the same input and output voltage ranges?

Yes. Both devices share the same functional specifications for input and output voltage ranges. The AD534TD and AD534KD both accept differential input voltages up to ±10 V and provide an output voltage range of ±10 V minimum, with the same transfer function and scaling. The differences lie in accuracy grades and temperature specifications, not in the basic analog operating ranges.

Which part is more suitable for military or aerospace applications?

The AD534TD is more suitable for military and aerospace applications because it is specified over the -55°C to +125°C temperature range, which aligns with typical military and aerospace requirements. The AD534KD is specified only for 0°C to +70°C and is intended for commercial and industrial applications within that range. Designers should verify that the selected grade meets the specific environmental and reliability requirements of the application.

Are the power supply requirements identical for the AD534TD and AD534KD?

Yes. Both the AD534TD and AD534KD operate from the same power supply voltages. The AD534 series is designed for ±15 V nominal dual supplies, with an operating range typically from ±8 V to ±18 V. The power supply rejection and quiescent current specifications are the same for both grades, as they share the same core die design.

What documentation should be consulted to confirm AD534TD versus AD534KD specifications?

The official Analog Devices AD534 datasheet is the primary source for verified specifications, including temperature grades, accuracy, package options, and electrical characteristics. Additional reliability and quality data may be available through Analog Devices product pages or authorized distributors such as DigiKey, Mouser, or TTI. Always refer to the latest revision of the manufacturer datasheet before making design or substitution decisions.