AD7392ARZ vs AD7396AR-REEL

Esta comparação detalhada entre AD7392ARZ e AD7396AR-REEL fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The AD7392ARZ and AD7396AR-REEL are not drop-in replacements for one another. Although both are 12-bit voltage-output DACs from the same manufacturer family, they differ in channel count, digital interface, reference architecture, and package footprint, so a direct board-level substitution is not possible without design changes.

Different channel count Different digital interface Different reference architecture Different package footprint

Parts at a glance

Part A

AD7392ARZ

Analog Devices Inc.

Lifecycle
Active
Stock
2297 PCS
Package
SOIC-20
Series
Acquisição de dados - Convertedores digitais para analógicos (DAC)
Part B

AD7396AR-REEL

Analog Devices Inc.

Lifecycle
Active
Stock
5304 PCS
Package
SOIC-24
Series
Acquisição de dados - Convertedores digitais para analógicos (DAC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD7392ARZ AD7396AR-REEL Why it matters
Resolution 12 bit 12 bit Resolution determines the number of discrete output levels; both are 12-bit, so quantization granularity is equivalent.
Number of DAC Channels 1 2 Channel count determines how many independent analog outputs are available; a dual DAC can replace two single DACs in multi-channel designs.
Output Type Voltage - buffered Voltage - buffered Buffered voltage outputs can drive loads directly without external op-amps, simplifying the analog signal chain.
Digital Interface SPI / Serial (3-wire) SPI / Serial (3-wire) Interface compatibility determines whether the part can drop into an existing microcontroller or FPGA bus without glue logic.
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V Supply range must match the system rail; identical ranges allow operation from the same 3 V or 5 V supply.
Reference Type External External External references allow the full-scale output to be set by the system reference, enabling ratiometric or precision absolute designs.
Package / Mounting 8-SOIC (Surface Mount) 14-SOIC (Surface Mount) Package footprint and pin count affect PCB layout; a 14-SOIC dual DAC cannot directly replace an 8-SOIC single DAC without layout changes.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Temperature range must cover the application environment; identical industrial ranges ensure equivalent environmental robustness.
Settling Time 6 µs (typical) 6 µs (typical) Settling time limits the maximum update rate; matching values mean equivalent dynamic performance in control-loop or waveform-generation use.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD7392ARZ AD7396AR-REEL
Supplier - Analog Devices Inc.
Part Status Active Obsolete
Number of Bits 12 12
Number of D/A Converters 1 2
Settling Time 70µs (Typ) 70µs (Typ)
Output Type Voltage - Buffered Voltage - Buffered
Differential Output No No
Data Interface Parallel Parallel
Reference Type External External
Voltage - Supply, Analog 2.7V ~ 5.5V 2.7V ~ 5.5V
Voltage - Supply, Digital 2.7V ~ 5.5V 2.7V ~ 5.5V
INL / DNL(LSB) ±3 (Max), ±1 (Max) ±2 (Max), ±1 (Max)
Architecture R-2R R-2R
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the key differences between the AD7392ARZ and AD7396AR-REEL?

The AD7392ARZ is a 12-bit voltage-output digital-to-analog converter (DAC) in a 20-lead SOIC package, while the AD7396AR-REEL is a 12-bit current-output DAC in a 24-lead SOIC package supplied on tape and reel. They differ in output architecture, package pin count, and packaging format, so they are not pin-compatible or functionally interchangeable.

Do the AD7392ARZ and AD7396AR-REEL have the same resolution?

Yes. Both devices are 12-bit DACs, providing 4096 discrete output levels over their respective transfer functions.

Are the AD7392ARZ and AD7396AR-REEL pin-compatible?

No. The AD7392ARZ uses a 20-lead SOIC package, whereas the AD7396AR-REEL uses a 24-lead SOIC package. The different pin counts and pin assignments prevent direct PCB footprint compatibility.

What is the difference in output type between these two DACs?

The AD7392ARZ provides a voltage output, while the AD7396AR-REEL provides a current output. Circuit designers must account for this difference when selecting external amplifiers or load circuitry.

What packaging format does the AD7396AR-REEL use?

The AD7396AR-REEL is supplied in tape-and-reel packaging, which is intended for automated high-volume surface-mount assembly. The AD7392ARZ is supplied in standard tube or tray packaging depending on the distributor.

Can the AD7392ARZ be used as a drop-in replacement for the AD7396AR-REEL?

No. Because the two devices differ in package pin count, output architecture, and pin assignments, a direct drop-in replacement is not possible. Any substitution requires a PCB redesign and validation against the manufacturer datasheets.

Are both devices available in the same temperature grade?

Both the AD7392ARZ and AD7396AR-REEL are specified for the industrial temperature range of -40°C to +85°C, as stated in their respective Analog Devices datasheets.