AD7654ASTZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 2675 PCS
- Package
- LQFP-48
- Series
- Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Esta comparação detalhada entre AD7654ASTZ e AD7656BSTZ fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The AD7656BSTZ and AD7654ASTZ are not drop-in replacements for one another. The AD7656BSTZ is a 6-channel, 16-bit simultaneous-sampling bipolar ADC in a 64-lead LQFP, while the AD7654ASTZ is a 4-channel, 16-bit simultaneous-sampling bipolar ADC in a 48-lead LQFP. The differing channel count, package footprint, and pinout require board-level redesign, so the AD7654ASTZ cannot be substituted directly for the AD7656BSTZ without schematic and layout changes.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD7656BSTZ | AD7654ASTZ | Why it matters |
|---|---|---|---|
| Number of ADC Channels | 6 | 4 | Determines how many independent analog signals can be sampled simultaneously; a direct constraint on system channel count and substitutability. |
| Resolution | 16 bits | 16 bits | Sets the quantization precision of the conversion; both match here, so accuracy class is equivalent. |
| Maximum Sampling Rate | 250 kSPS | 500 kSPS | Defines the highest signal bandwidth the ADC can capture; the AD7654 supports twice the throughput per channel. |
| Input Type | Single-ended (true bipolar) | Pseudo-differential (true bipolar) | Affects how signals are wired and common-mode rejection; pseudo-differential inputs can reject ground noise better than single-ended. |
| Analog Input Voltage Range | ±10 V (with 5 V reference) | ±10 V (with 2.5 V reference) | Determines the full-scale signal span the ADC can accept; both cover ±10 V but require different reference voltages. |
| Reference Voltage | 2.5 V internal (5 V range option) | 2.5 V internal | The reference sets the conversion scale; differing reference configurations affect external circuitry and scaling. |
| Supply Voltage | 5 V analog (AVDD), 5 V digital (DVDD) | 5 V analog (AVDD), 5 V digital (DVDD) | Governs power rail requirements and interface levels; identical supplies simplify board-level substitution. |
| Digital Interface | Parallel and serial (SPI/QSPI/MICROWIRE/DSP) | Parallel and serial (SPI/QSPI/MICROWIRE/DSP) | Determines host connectivity options; matching interfaces ease drop-in replacement in existing designs. |
| Package | 64-lead LQFP | 48-lead LQFP | Footprint and pin count must match for physical substitutability; different packages require PCB redesign. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Defines the environmental envelope for reliable operation; identical ranges mean equivalent thermal suitability. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD7654ASTZ | AD7656BSTZ |
|---|---|---|
| Series | PulSAR® | iCMOS® |
| Part Status | Active | Active |
| Number of Bits | 16 | 16 |
| Sampling Rate(Per Second) | 500k | 250k |
| Number of Inputs | 2, 4 | 6 |
| Input Type | Pseudo-Differential, Single Ended | Single Ended |
| Data Interface | SPI, Parallel, DSP | SPI, Parallel, DSP |
| Configuration | MUX-S/H-MUX-ADC | S/H-ADC |
| Ratio - S / H: ADC | 2:1 | 1:1 |
| Number of A/D Converters | 1 | 6 |
| Architecture | SAR | SAR |
| Reference Type | External | External, Internal |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 5V | 5V |
| Features | Simultaneous Sampling | Simultaneous Sampling, True Bipolar |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The AD7656BSTZ is a 16-bit, 6-channel simultaneous-sampling SAR ADC with a 250 kSPS throughput rate, while the AD7654ASTZ is a 16-bit, 4-channel simultaneous-sampling SAR ADC with a 500 kSPS throughput rate. The AD7656BSTZ offers more channels but a lower per-channel throughput, whereas the AD7654ASTZ provides fewer channels at a higher sampling rate.
No. The AD7656BSTZ is supplied in a 64-lead LQFP package, while the AD7654ASTZ is supplied in a 48-lead LQFP package. The different package sizes and pin counts mean the two devices are not pin-compatible and cannot be interchanged on the same PCB land pattern without redesign.
Both devices are 16-bit successive-approximation-register (SAR) analog-to-digital converters. The AD7656BSTZ provides six simultaneous-sampling channels, and the AD7654ASTZ provides four simultaneous-sampling channels, both using the SAR architecture with integrated track-and-hold circuitry.
The AD7656BSTZ has a maximum throughput rate of 250 kSPS, while the AD7654ASTZ has a maximum throughput rate of 500 kSPS. The higher rate of the AD7654ASTZ applies to its four channels, whereas the AD7656BSTZ distributes its 250 kSPS rate across six channels.
Both the AD7656BSTZ and AD7654ASTZ support bipolar analog input ranges of ±10 V, ±5 V, and ±2.5 V, selectable via configuration. This makes both devices suitable for industrial signal acquisition where bipolar input swings are present.
Both devices provide a parallel digital interface for connection to host processors or DSPs. The AD7656BSTZ offers a 16-bit parallel interface, and the AD7654ASTZ also provides a parallel interface for reading conversion results. Designers should consult the respective datasheets for the exact interface timing and control signal definitions.
Both devices require an analog supply of 5 V and a separate digital supply, and both include an on-chip reference. Because the package, channel count, and throughput differ, the surrounding power and decoupling network must be designed per the specific device datasheet rather than assumed interchangeable.
The AD7656BSTZ is better suited when six simultaneous-sampling channels are required, since it integrates six ADCs in one package. The AD7654ASTZ is preferable when four channels are sufficient and a higher per-channel throughput of 500 kSPS is needed.