AD7656YSTZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 7772 PCS
- Package
- LQFP-64
- Series
- Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Esta comparação detalhada entre AD7656YSTZ e AD7651AST fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The AD7656YSTZ and AD7651AST are not functionally interchangeable: the AD7656YSTZ is a six-channel simultaneous-sampling bipolar ADC in a 64-lead LQFP, while the AD7651AST is a single-channel unipolar ADC in a 48-lead LQFP. The differences in channel count, input configuration, package footprint, and digital interface make direct substitution impractical without a full board and firmware redesign.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD7656YSTZ | AD7651AST | Why it matters |
|---|---|---|---|
| Number of ADC Channels | 6 | 1 | Determines how many independent analog signals can be sampled simultaneously; a 6-channel device cannot be replaced by a single-channel part without redesigning the signal chain. |
| Resolution | 16 bits | 16 bits | Both provide 16-bit resolution, so precision and dynamic range are equivalent for the sampled signal. |
| Sampling Rate (max) | 250 kSPS | 100 kSPS | Sets the maximum bandwidth of signals that can be digitized; the higher-rate part supports faster acquisition and wider analog bandwidth. |
| Input Type | Single-ended (true bipolar) | Single-ended (unipolar/bipolar) | Input configuration must match the sensor or signal source; mismatched input ranges require external level shifting or attenuation. |
| Interface | Parallel / Serial (SPI) | Parallel / Serial (SPI) | Both support parallel and serial interfaces, so host-side digital connectivity is compatible. |
| Supply Voltage (analog) | 5 V | 5 V | Analog supply must match the board's power rail; identical 5 V requirement simplifies substitution. |
| Package | 44-Lead LQFP | 48-Lead LQFP | Footprint and pin count must match for a drop-in replacement; differing packages require PCB redesign. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Both cover the industrial temperature range, so environmental compatibility is equivalent. |
| Power Consumption (typ) | 160 mW | 100 mW | Affects thermal budget and power supply sizing; the lower-power part may be preferred in power-sensitive designs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD7656YSTZ | AD7651AST |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Series | iCMOS® | PulSAR® |
| Part Status | Active | Obsolete |
| Number of Bits | 16 | 16 |
| Sampling Rate(Per Second) | 250k | 100k |
| Number of A/D Converters | 6 | 1 |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 85°C |
| Number of Inputs | 6 | - |
| Input Type | Single Ended | - |
| Data Interface | SPI, Parallel, DSP | - |
| Configuration | S/H-ADC | - |
| Ratio - S / H: ADC | 1:1 | - |
| Architecture | SAR | - |
| Reference Type | External, Internal | - |
| Voltage - Supply, Analog | 5V | - |
| Voltage - Supply, Digital | 5V | - |
| Features | Simultaneous Sampling, True Bipolar | - |
The AD7656YSTZ is a 16-bit, 6-channel simultaneous-sampling SAR ADC offering 250 kSPS per channel, while the AD7651AST is a 16-bit, single-channel SAR ADC offering 100 kSPS. The AD7656YSTZ is supplied in a 64-lead LQFP package, whereas the AD7651AST is supplied in a 48-lead LQFP package. They differ in channel count, throughput, package, and intended application scope.
No. The AD7656YSTZ uses a 64-lead LQFP package and the AD7651AST uses a 48-lead LQFP package, so they are not pin-compatible and cannot be used as drop-in replacements without a PCB redesign.
Both devices provide 16-bit resolution. The AD7656YSTZ offers 250 kSPS per channel across six simultaneous-sampling channels, while the AD7651AST offers 100 kSPS on a single channel.
The AD7656YSTZ provides six independent simultaneous-sampling ADC channels, making it suited to multi-phase or multi-channel acquisition. The AD7651AST provides a single ADC channel, making it suited to single-channel precision measurement.
The AD7656YSTZ is offered in a 64-lead LQFP package, and the AD7651AST is offered in a 48-lead LQFP package. Both are specified for the industrial temperature range of −40°C to +85°C.
The AD7656YSTZ is the appropriate choice for simultaneous multi-channel sampling because it integrates six simultaneous-sampling 16-bit ADCs. The AD7651AST has only one channel and cannot perform simultaneous multi-channel acquisition on its own.
Not directly. Because the AD7651AST has a single channel, lower throughput (100 kSPS vs 250 kSPS per channel), and a different 48-lead LQFP footprint, substituting it for the AD7656YSTZ would require redesign of the acquisition architecture, PCB layout, and firmware.