AD7677ASTZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 1648 PCS
- Package
- LQFP-48
- Series
- Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Esta comparação detalhada entre AD7677ASTZ e AD7679ASTZRL fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The AD7677ASTZ and AD7679ASTZRL are both 18-bit successive-approximation ADCs from Analog Devices in the same LQFP-48 package, sharing a common architecture and pinout family. The AD7679ASTZRL offers a higher maximum sampling rate (570 kSPS versus 1 MSPS-class operation of the AD7677) and a wider input span option, so it can serve as a functional upgrade in many designs, but the differing throughput, input range configuration, and reference/supply requirements must be validated against the target application before substitution.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD7677ASTZ | AD7679ASTZRL | Why it matters |
|---|---|---|---|
| Resolution (bits) | 16 | 18 | Higher resolution provides finer quantization and better dynamic range; an 18-bit part cannot be directly substituted where 16-bit data format is expected without adjustment. |
| Sampling Rate (max) | 1 MSPS | 570 kSPS | Maximum throughput determines whether the ADC can keep up with the system's signal bandwidth and timing requirements. |
| Input Type | Differential | Differential | Differential inputs improve common-mode rejection and noise immunity; matching input topology is essential for direct board-level substitution. |
| Interface | Parallel / Serial (SPI) | Parallel / Serial (SPI) | The digital interface must match the host controller's bus to allow drop-in replacement without firmware or layout changes. |
| Supply Voltage (analog) | 5 V | 5 V | Analog supply must be compatible with the existing power rail and reference scheme for correct operation. |
| Package | 48-Lead LQFP | 48-Lead LQFP | Identical package and pinout enable physical drop-in replacement on an existing PCB footprint. |
| INL (max) | ±2.5 LSB | ±2.5 LSB | Integral nonlinearity affects absolute accuracy; comparable INL means similar measurement fidelity in the target application. |
| SNR (typ) | 92 dB | 101 dB | Signal-to-noise ratio defines usable dynamic range; the 18-bit device offers higher SNR, which may exceed or differ from system requirements. |
| Power Consumption (typ) | 90 mW | 75 mW | Power budget and thermal considerations differ between the two parts, affecting supply design and enclosure thermal limits. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD7677ASTZ | AD7679ASTZRL |
|---|---|---|
| Supplier | - | Analog Devices Inc. |
| Series | PulSAR® | PulSAR® |
| Part Status | Active | Obsolete |
| Number of Bits | 16 | 18 |
| Sampling Rate(Per Second) | 1M | 570k |
| Number of Inputs | 1 | 1 |
| Input Type | Differential | Differential |
| Data Interface | SPI, Parallel, DSP | SPI, Parallel, DSP |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | External, Internal |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The AD7677ASTZ is a 16-bit, 1 MSPS differential SAR ADC, while the AD7679ASTZRL is an 18-bit, 570 kSPS differential SAR ADC. The AD7679 offers higher resolution but a lower maximum throughput rate than the AD7677. Both are pin-compatible members of Analog Devices' PulSAR family in 48-lead LQFP packages.
Yes. Both devices are offered in the same 48-lead LQFP (ST-48) package and share the same pinout, which allows a common PCB footprint. However, firmware and timing must be revalidated because the two parts differ in resolution and maximum sample rate.
The AD7677ASTZ supports a maximum throughput of 1 MSPS. The AD7679ASTZRL supports a maximum throughput of 570 kSPS. The lower rate of the AD7679 is a consequence of its higher 18-bit resolution.
The AD7677ASTZ provides 16-bit resolution with a typical SNR of 92 dB. The AD7679ASTZRL provides 18-bit resolution with a typical SNR of 98 dB. The higher SNR of the AD7679 reflects its greater resolution.
Yes. Both the AD7677ASTZ and AD7679ASTZRL feature fully differential analog inputs and support the same analog input voltage range options, including ±10 V, ±5 V, and 0 V to 5 V ranges, configured through the same input range selection scheme.
Both devices provide a parallel digital interface with a flexible host connection, supporting 8-bit and 16-bit bus widths and a separate supply for the digital interface (VIO). This allows direct connection to a variety of processors and DSPs.
Both the AD7677ASTZ and AD7679ASTZRL operate from a 5 V analog supply (AVDD) and a separate digital interface supply (VIO) that can range from 2.7 V to 5.25 V, allowing compatibility with lower-voltage logic.
Because the two parts are pin-compatible, the AD7679ASTZRL can be placed on the same footprint, but it is not a direct drop-in replacement without validation. The system must accommodate the lower 570 kSPS maximum throughput and confirm that timing, firmware, and signal conditioning meet the 18-bit performance requirements.