AD7705BRZ-REEL vs AD7701AR

Esta comparação detalhada entre AD7705BRZ-REEL e AD7701AR fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The AD7705BRZ-REEL and AD7701AR are not drop-in replacements for one another. They differ in resolution, input channel architecture, digital interface, and package footprint, so substituting one for the other requires a full board and firmware redesign rather than a direct swap.

Different resolution Different input architecture Different digital interface Different package footprint

Parts at a glance

Part A

AD7705BRZ-REEL

Analog Devices Inc.

Lifecycle
Active
Stock
7181 PCS
Package
SOIC-16
Series
Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Part B

AD7701AR

Analog Devices Inc.

Lifecycle
Active
Stock
8718 PCS
Package
SOIC-20
Series
Acquisição de dados - Analogo para Convertedores Digitais (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD7705BRZ-REEL AD7701AR Why it matters
Resolution (bits) 16 16 Both are 16-bit ADCs, so resolution is equivalent for precision measurement applications.
Number of input channels 2 (differential) 1 (single-ended) The AD7705 offers two differential inputs, enabling multi-channel or differential sensing, while the AD7701 provides only a single-ended input.
Input type Differential Single-ended Differential inputs reject common-mode noise and are preferred for low-level sensor signals; single-ended is simpler but less noise-immune.
Architecture Sigma-delta (charge-balancing) Sigma-delta (charge-balancing) Both use sigma-delta conversion, providing high resolution and good noise performance for low-frequency signals.
Output interface SPI / 3-wire serial Serial (SPI-compatible) Both provide serial output, but the exact protocol and timing differ, affecting microcontroller compatibility and firmware design.
Supply voltage (V) 2.7 to 3.3 (DVDD), 2.7 to 5.25 (AVDD) 5 (single supply) The AD7705 supports lower and split supply voltages, while the AD7701 requires a 5 V supply, affecting system power design.
Package 16-lead SOIC 20-lead SOIC Different package sizes and pin counts affect PCB layout and are not drop-in footprint compatible.
Operating temperature range (°C) -40 to +85 -40 to +85 Both cover the industrial temperature range, so environmental suitability is equivalent.
On-chip PGA / gain Yes (gain 1 to 128) No (external gain required) The AD7705 integrates a programmable gain amplifier for direct low-level signal conditioning, while the AD7701 needs external amplification.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD7705BRZ-REEL AD7701AR
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Obsolete
Number of Bits 16 16
Sampling Rate(Per Second) 500 4k
Number of Inputs 2 1
Input Type Differential Single Ended
Data Interface SPI, DSP SPI
Configuration MUX-PGA-ADC S/H-ADC
Ratio - S / H: ADC - 1:1
Number of A/D Converters 1 1
Architecture Sigma-Delta Sigma-Delta
Reference Type External External
Voltage - Supply, Analog 2.7V ~ 3.3V, 5V 5V
Voltage - Supply, Digital 2.7V ~ 3.3V, 5V 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Features PGA -

Frequently asked questions

What are the key architectural differences between the AD7705BRZ-REEL and the AD7701AR?

The AD7705BRZ-REEL is a 2-channel, 16-bit sigma-delta ADC with an on-chip programmable gain amplifier (PGA) and a serial SPI-compatible interface, housed in a 16-lead SOIC. The AD7701AR is a single-channel, 16-bit sigma-delta ADC with a serial interface and a 20-lead SOIC package. The AD7705 integrates a PGA and two differential input channels, while the AD7701 provides a single channel without an integrated PGA.

Do the AD7705BRZ-REEL and AD7701AR have the same resolution and output rate?

Both devices provide 16-bit resolution. The AD7705BRZ-REEL offers programmable output update rates from 20 Hz to 500 Hz, while the AD7701AR provides a fixed 4 kHz output update rate. The output rate configurations are therefore not equivalent between the two parts.

Can the AD7705BRZ-REEL and AD7701AR be used with the same supply voltage?

The AD7705BRZ-REEL operates from a 2.7 V to 3.3 V or 4.75 V to 5.25 V supply, depending on the specified grade. The AD7701AR operates from a 5 V supply. Designs must verify the exact grade and supply range against the respective manufacturer datasheets before sharing a common rail.

Are the AD7705BRZ-REEL and AD7701AR pin-compatible?

No. The AD7705BRZ-REEL is supplied in a 16-lead SOIC package, while the AD7701AR is supplied in a 20-lead SOIC package. The differing package sizes and pin counts mean the two devices are not pin-compatible and require different PCB land patterns.

What input channel configuration does each device support?

The AD7705BRZ-REEL provides two differential input channels with an on-chip PGA, allowing direct connection of low-level signals. The AD7701AR provides a single input channel and does not include an integrated PGA, so external signal conditioning may be required for low-level inputs.

Do both devices use a serial interface for communication?

Yes. Both the AD7705BRZ-REEL and the AD7701AR use a serial interface for communication with a host controller. The AD7705BRZ-REEL uses an SPI-compatible serial interface, while the AD7701AR uses a serial interface as specified in its datasheet. Engineers should confirm the exact interface timing and protocol from the respective manufacturer documentation.

Which device is better suited for multi-channel low-level signal acquisition?

The AD7705BRZ-REEL is better suited for multi-channel low-level signal acquisition because it integrates a PGA and provides two differential input channels. The AD7701AR, with a single channel and no integrated PGA, is more appropriate for single-channel applications where external gain stages are acceptable.