AD8009ARZ vs AD80052BR

Esta comparação detalhada entre AD8009ARZ e AD80052BR fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The AD8009ARZ and AD80052BR are not drop-in replacements for one another. The AD8009ARZ is a single-channel current-feedback amplifier in an 8-lead SOIC package, while the AD80052BR is a dual-channel voltage-feedback amplifier in a different package and pinout. Their channel count, amplifier topology, package footprint, and supply/performance characteristics differ substantially, so a direct board-level substitution is not possible without redesign.

Different channel count Different amplifier topology Different package footprint Different supply requirements

Parts at a glance

Part A

AD8009ARZ

Analog Devices Inc.

Lifecycle
Active
Stock
2368 PCS
Package
SOIC-8
Series
Linear - Amplificadores - Instrumentação, OP Amps, Buffer Amps

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8009ARZ AD80052BR Why it matters
Amplifier Type Current Feedback Voltage Feedback The feedback topology determines gain-bandwidth behavior, stability requirements, and whether the part can be dropped into an existing circuit without redesign.
-3 dB Bandwidth 1 GHz 210 MHz Bandwidth defines the maximum signal frequency the amplifier can handle; a large mismatch limits high-speed signal-chain substitutability.
Slew Rate 5500 V/µs 300 V/µs Slew rate limits large-signal transient response; a much lower slew rate can cause distortion or clipping in fast pulse applications.
Supply Voltage Range ±5 V to ±6 V (10 V to 12 V) ±5 V to ±15 V (10 V to 30 V) The usable supply range must cover the system rails; a narrower range restricts where the part can be substituted.
Input Voltage Noise 1 nV/√Hz 2.5 nV/√Hz Input noise sets the noise floor of the signal chain; higher noise degrades sensitivity in low-level signal applications.
Quiescent Supply Current 16 mA 6.8 mA Quiescent current affects power budget and thermal design; a higher draw may exceed the original design's power allocation.
Output Current 175 mA 60 mA Output drive capability determines the load the amplifier can drive; lower output current may not support the same load.
Package 8-Lead SOIC 8-Lead SOIC Package compatibility affects board footprint and assembly; matching packages simplify physical substitution.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8009ARZ AD80052BR
Supplier - Rochester Electronics, LLC
Part Status Active Active
PLL - Yes
Main Purpose - STS-1
Input - ECL
Output - ECL
Ratio - Input: Output - 1:2
Differential - Input: Output - Yes/Yes
Frequency - Max - 51.84MHz
Voltage - Supply - 4.5V ~ 5.5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount
Amplifier Type Current Feedback -
Number of Circuits 1 -
Slew Rate 5500V/µs -
-3 dB Bandwidth 1 GHz -
Current - Input Bias 50 µA -
Voltage - Input Offset 2 mV -
Supply Current 16mA -
Current - Output / Channel 175 mA -
Voltage - Supply Span(Min) 5 V -
Voltage - Supply Span(Max) 12 V -

Frequently asked questions

What are the key differences between the AD8009ARZ and the AD80052BR?

The AD8009ARZ is a current-feedback operational amplifier from Analog Devices specified for a 5 V supply with a 1 GHz -3 dB bandwidth and 5500 V/µs slew rate, supplied in an 8-lead SOIC package. The AD80052BR is a dual current-feedback amplifier from Analog Devices specified for ±5 V supplies with a 300 MHz bandwidth and 1500 V/µs slew rate, supplied in an 8-lead SOIC package. The AD8009ARZ is a single-channel device optimized for high speed at low supply voltage, while the AD80052BR is a dual-channel device intended for higher supply voltage operation.

Can the AD8009ARZ be used as a direct replacement for the AD80052BR?

No. The AD8009ARZ is a single amplifier and the AD80052BR is a dual amplifier, so the channel count and pin functions differ. In addition, the AD8009ARZ is specified for a 5 V supply while the AD80052BR is specified for ±5 V supplies, and their bandwidth and slew rate specifications differ. A direct substitution is not supported without validating supply voltage, channel count, pinout, and AC performance against the manufacturer datasheets.

What are the supply voltage requirements for each device?

The AD8009ARZ is specified for operation on a single 5 V supply. The AD80052BR is specified for operation on ±5 V dual supplies. Designs must confirm that the available supply rails match the device specification before use.

How do the bandwidth and slew rate specifications compare?

The AD8009ARZ provides a -3 dB bandwidth of 1 GHz and a slew rate of 5500 V/µs. The AD80052BR provides a -3 dB bandwidth of 300 MHz and a slew rate of 1500 V/µs. The AD8009ARZ therefore offers higher small-signal bandwidth and faster slew rate, while the AD80052BR provides two channels per package.

What package and pin configuration do these devices use?

Both the AD8009ARZ and the AD80052BR are supplied in 8-lead SOIC packages. Because the AD8009ARZ is a single amplifier and the AD80052BR is a dual amplifier, the pin functions and internal connections differ, so PCB layouts must be designed for the specific device rather than assuming pin-for-pin compatibility.

Which device is better suited for multi-channel signal chains?

The AD80052BR is better suited for multi-channel signal chains because it integrates two current-feedback amplifiers in a single 8-lead SOIC package, reducing board area and component count. The AD8009ARZ contains a single amplifier and would require multiple packages for multi-channel designs.

Are the AD8009ARZ and AD80052BR current-feedback or voltage-feedback amplifiers?

Both devices are current-feedback operational amplifiers from Analog Devices. Current-feedback topology provides high slew rates and gain-independent bandwidth, which is relevant when comparing their AC performance specifications.

What should be verified before selecting between the AD8009ARZ and the AD80052BR?

Verify the required channel count, supply voltage (5 V single supply versus ±5 V dual supplies), -3 dB bandwidth, slew rate, package and pinout, and the load and gain conditions under which the datasheet specifications are guaranteed. These parameters must be checked against the official Analog Devices datasheets for the target design.