AD8219BRMZ vs AD8217BRMZ

Esta comparação detalhada entre AD8219BRMZ e AD8217BRMZ fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8219BRMZ and AD8217BRMZ are both high-voltage current shunt amplifiers in the same 8-lead MSOP package with identical pinout, making them strong functional replacement candidates. However, the AD8219BRMZ offers a wider input common-mode voltage range and higher gain, while the AD8217BRMZ provides a lower fixed gain with a tighter gain error specification. Designers should validate gain accuracy and common-mode operating range against their specific application requirements before substituting one for the other.

Package Type High match
Pin Configuration High match
Gain Validation required
Input Common-Mode Voltage Range Validation required

Parts at a glance

Part A

AD8219BRMZ

Analog Devices Inc.

Lifecycle
Active
Stock
3383 PCS
Series
Gestão da Potência (PMIC) - Gestão da Regulação atual

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8219BRMZ AD8217BRMZ Why it matters
Amplifier Type / Function Current shunt monitor (high-side, unidirectional) Current shunt monitor (high-side, bidirectional zero-drift) Determines whether the device can measure current in both directions or only one direction, which affects circuit topology and load-monitoring capability.
Input Common-Mode Voltage Range 0 V to 80 V 4.5 V to 80 V Defines the bus voltage range over which the monitor can operate; the AD8219 can sense down to 0 V while the AD8217 requires a minimum common-mode of 4.5 V.
Supply Voltage Range 4.5 V to 80 V 4.5 V to 80 V (single supply) Both share the same supply range, so power-rail compatibility is equivalent for substitution purposes.
Gain Fixed gain of 60 V/V Fixed gain of 20 V/V Gain sets the output voltage per unit of shunt voltage; a different gain changes the output scaling and may require recalibration of downstream ADC thresholds.
Input Offset Voltage (max) ±1 mV (typical ±0.3 mV) ±1 mV (zero-drift architecture) Offset directly limits low-current measurement accuracy; comparable offset values mean similar accuracy at small shunt voltages.
Offset Drift Not zero-drift (standard architecture) Zero-drift (low offset drift) Zero-drift topology keeps offset stable over temperature, improving accuracy in precision or wide-temperature applications.
Bandwidth 500 kHz (typical) 500 kHz (typical) Bandwidth determines how fast current transients can be tracked; identical bandwidth means similar dynamic response.
Output Type Voltage output (unidirectional) Voltage output (bidirectional, centered) Output format affects how the signal is interpreted by the ADC; bidirectional output allows detection of reverse current but requires a mid-supply reference.
Package 8-lead MSOP (RM) 8-lead MSOP (RM) Identical package and pinout enable drop-in board replacement without layout changes.
Operating Temperature Range −40 °C to +125 °C −40 °C to +125 °C Matching temperature ratings ensure equivalent environmental robustness for industrial and automotive use.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8219BRMZ AD8217BRMZ
Part Status Active Active
Function Current Monitor Current Monitor
Sensing Method High-Side High-Side
Accuracy ±0.3% ±0.1%
Voltage - Input 4V ~ 80V 4.5V ~ 80V
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount
Base Product Number AD8219 -
Packaging Tube -

Frequently asked questions

What are the primary functional differences between the AD8219BRMZ and AD8217BRMZ?

The AD8219BRMZ is a high voltage, bidirectional current shunt amplifier with a fixed gain of 60 V/V, designed for unidirectional and bidirectional current sensing. The AD8217BRMZ is a high voltage, bidirectional current shunt amplifier with a fixed gain of 20 V/V. Both are zero-drift current shunt amplifiers in an 8-lead MSOP package, but they differ in gain and specified common-mode voltage range.

What is the gain of each device?

The AD8219BRMZ has a fixed gain of 60 V/V. The AD8217BRMZ has a fixed gain of 20 V/V. These gains are set internally and cannot be adjusted externally.

What common-mode voltage ranges do the AD8219BRMZ and AD8217BRMZ support?

The AD8219BRMZ operates over a common-mode voltage range of −2 V to +80 V. The AD8217BRMZ operates over a common-mode voltage range of −2 V to +80 V as well, making both suitable for high-side current sensing in high-voltage systems.

Are the AD8219BRMZ and AD8217BRMZ pin-compatible?

Yes. Both devices are offered in the same 8-lead MSOP (RM) package and share the same pinout, allowing them to be used on the same PCB footprint. However, because their gains differ, the output voltage for a given shunt current will differ, so the downstream signal chain must be validated for the selected gain.

What is the supply voltage range for these devices?

Both the AD8219BRMZ and AD8217BRMZ operate from a single supply voltage of 4.5 V to 80 V. This wide supply range supports use in 12 V, 24 V, and 48 V industrial and automotive systems.

What are the key accuracy specifications of the AD8219BRMZ and AD8217BRMZ?

Both devices feature low offset drift and low gain error. The AD8219BRMZ specifies a typical input offset voltage of ±0.3 mV and typical gain error of ±0.1%. The AD8217BRMZ specifies a typical input offset voltage of ±0.3 mV and typical gain error of ±0.1%. Both offer zero-drift performance suitable for precision current sensing over temperature.

Can the AD8219BRMZ and AD8217BRMZ be used for bidirectional current sensing?

Yes. Both the AD8219BRMZ and AD8217BRMZ are bidirectional current shunt amplifiers, capable of sensing current in both directions through the shunt resistor. The output voltage swings above and below the reference level to indicate current polarity.

What is the operating temperature range for the AD8219BRMZ and AD8217BRMZ?

Both the AD8219BRMZ and AD8217BRMZ are specified for operation over the industrial temperature range of −40°C to +125°C, making them suitable for harsh industrial and automotive environments.