AD8236ARMZ vs AD8237ARMZ-R7

Esta comparação detalhada entre AD8236ARMZ e AD8237ARMZ-R7 fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8237ARMZ-R7 and AD8236ARMZ are both zero-drift instrumentation amplifiers in the same 8-lead MSOP package, but they differ in supply voltage range, quiescent current, and gain configuration. The AD8237ARMZ-R7 supports a wider supply range and lower quiescent current, while the AD8236ARMZ offers a fixed gain of 51. Designers should validate supply headroom, gain requirements, and power budget before substituting one for the other in a given application.

Supply Voltage Range Validation required
Gain Configuration Validation required
Package Type High match
Quiescent Current Validation required

Parts at a glance

Part A

AD8236ARMZ

Analog Devices Inc.

Lifecycle
Active
Stock
3436 PCS
Package
MSOP-8
Series
Linear - Amplificadores - Instrumentação, OP Amps, Buffer Amps
Part B

AD8237ARMZ-R7

Analog Devices Inc.

Lifecycle
Active
Stock
1608 PCS
Package
MSOP-8
Series
Linear - Amplificadores - Instrumentação, OP Amps, Buffer Amps

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8237ARMZ-R7 AD8236ARMZ Why it matters
Amplifier Type Instrumentation Amplifier (indirect current mode) Instrumentation Amplifier (micropower) The architecture determines noise, input range, and gain-setting behavior, affecting whether the part fits a given signal chain.
Number of Channels 1 1 Both are single-channel, so channel count is not a differentiator for substitutability.
Supply Voltage Range 1.8 V to 5.5 V 1.8 V to 5.5 V Compatible supply ranges allow the parts to operate in the same low-voltage systems.
Input Offset Voltage (max) ±75 µV ±250 µV Lower offset improves DC accuracy; the AD8237 offers tighter offset for precision applications.
Input Offset Voltage Drift 0.3 µV/°C (typ) 2 µV/°C (typ) Drift affects accuracy over temperature; the AD8237 is significantly more stable.
Input Bias Current 1 pA (typ) 1 pA (typ) Very low bias current suits high-impedance sensors; both parts are comparable here.
Gain Setting External resistors (indirect current mode) Pin-selectable gains of 5, 10, 20, 40, 80, 160 Fixed pin-selectable gains simplify design but limit flexibility, while external resistors allow arbitrary gain.
Supply Current per Amplifier 130 µA (typ) 50 µA (typ) Lower quiescent current extends battery life; the AD8236 is better for ultra-low-power designs.
Input Voltage Noise Density 68 nV/√Hz (typ, at 1 kHz) 95 nV/√Hz (typ, at 1 kHz) Lower noise improves resolution for small signals; the AD8237 provides better noise performance.
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C Identical temperature ratings mean both suit industrial and extended-temperature environments.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8236ARMZ AD8237ARMZ-R7
Part Status Active Active
Amplifier Type Instrumentation Instrumentation
Number of Circuits 1 1
Output Type Rail-to-Rail Rail-to-Rail
Slew Rate 0.011V/µs 0.15V/µs
-3 dB Bandwidth 23 kHz 200 kHz
Current - Input Bias 1 pA 250 pA
Voltage - Input Offset 3.5 mV 25 µV
Supply Current 33µA 115µA
Current - Output / Channel 6 mA 4 mA
Voltage - Supply Span(Min) 1.8 V 1.8 V
Voltage - Supply Span(Max) 5.5 V 5.5 V
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the key architectural differences between the AD8237ARMZ-R7 and the AD8236ARMZ?

The AD8237ARMZ-R7 is a micropower, zero-drift instrumentation amplifier with a rail-to-rail input and output, featuring a unique indirect current mode architecture. The AD8236ARMZ is a micropower instrumentation amplifier with a fixed gain of 5, also featuring rail-to-rail output. The AD8237ARMZ-R7 allows user-programmable gain via external resistors, whereas the AD8236ARMZ has a fixed gain configuration.

Are the AD8237ARMZ-R7 and AD8236ARMZ pin-compatible?

Both devices are offered in an 8-lead MSOP (RM) package. However, pin functions differ: the AD8237ARMZ-R7 uses the standard instrumentation amplifier pinout with gain-setting resistor pins (RG), while the AD8236ARMZ has a fixed gain of 5 and its pinout reflects internal gain-setting connections. They are not directly interchangeable without verifying the pin functions against the respective datasheets.

How do the supply voltage ranges compare between the AD8237ARMZ-R7 and AD8236ARMZ?

The AD8237ARMZ-R7 operates from a single supply of 1.8 V to 5.5 V (or dual supplies of ±0.9 V to ±2.75 V). The AD8236ARMZ operates from a single supply of 1.8 V to 5.5 V (or dual supplies of ±0.9 V to ±2.75 V). Both devices share the same supply voltage range.

What is the quiescent current consumption of each device?

The AD8237ARMZ-R7 typically draws 130 µA of quiescent current. The AD8236ARMZ typically draws 45 µA of quiescent current. The AD8236ARMZ is therefore better suited for lower-power applications, while the AD8237ARMZ-R7 offers greater gain flexibility.

How does the gain configuration differ between the AD8237ARMZ-R7 and AD8236ARMZ?

The AD8237ARMZ-R7 is a user-programmable gain instrumentation amplifier; gain is set by an external resistor connected between the RG pins, allowing a wide range of gains. The AD8236ARMZ has a fixed gain of 5, set internally, and does not require external gain resistors. This makes the AD8236ARMZ simpler to use where a gain of 5 is sufficient.

What are the input offset voltage specifications for the AD8237ARMZ-R7 and AD8236ARMZ?

The AD8237ARMZ-R7 features a maximum input offset voltage of 75 µV with a typical offset drift of 0.3 µV/°C, owing to its zero-drift architecture. The AD8236ARMZ has a maximum input offset voltage of 500 µV (referred to input) with typical drift of 2 µV/°C. The AD8237ARMZ-R7 provides superior DC precision.

Which device is more suitable for high-precision, low-drift sensor signal conditioning?

The AD8237ARMZ-R7 is generally more suitable for high-precision, low-drift applications due to its zero-drift architecture, lower maximum input offset voltage (75 µV), and lower offset drift (0.3 µV/°C typical). The AD8236ARMZ, with 500 µV maximum offset and 2 µV/°C typical drift, is adequate for less demanding precision applications where a fixed gain of 5 is acceptable.

Do both the AD8237ARMZ-R7 and AD8236ARMZ support rail-to-rail input and output?

Both devices feature rail-to-rail output swing. The AD8237ARMZ-R7 has a rail-to-rail input stage. The AD8236ARMZ input common-mode range extends from the negative supply to within approximately 0.1 V of the positive supply (per datasheet). Designers should verify input common-mode headroom requirements against the specific datasheet for each device.