AD8429BRZ vs AD8422ARZ-RL

Esta comparação detalhada entre AD8429BRZ e AD8422ARZ-RL fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8429BRZ and AD8422ARZ-RL are both precision instrumentation amplifiers from Analog Devices, but they differ in gain range, bandwidth, supply voltage, and package. The AD8422ARZ-RL offers a wider supply range and lower power consumption, while the AD8429BRZ provides higher bandwidth and a broader gain range. Designers should validate noise, gain accuracy, and thermal performance against the target application before substituting one for the other.

Gain Range Validation required
Bandwidth Validation required
Supply Voltage Validation required
Package Type High match

Parts at a glance

Part A

AD8429BRZ

Analog Devices Inc.

Lifecycle
Active
Stock
6879 PCS
Package
SOIC-8
Series
Linear - Amplificadores - Instrumentação, OP Amps, Buffer Amps
Part B

AD8422ARZ-RL

Analog Devices Inc.

Lifecycle
Active
Stock
9390 PCS
Package
SOIC-8
Series
Linear - Amplificadores - Instrumentação, OP Amps, Buffer Amps

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8429BRZ AD8422ARZ-RL Why it matters
Number of Channels 1 1 Both are single-channel instrumentation amplifiers, so channel count is functionally equivalent.
Gain Bandwidth Product (GBW) 15 MHz 2.2 MHz Higher GBW allows the AD8429 to handle wider signal bandwidths and higher gains before roll-off, affecting high-frequency measurement capability.
Input Voltage Noise (1 kHz) 1 nV/√Hz 8 nV/√Hz Lower input noise improves signal-to-noise ratio for low-level signals; the AD8429 is significantly quieter.
Input Offset Voltage (max) 50 µV 70 µV Lower offset voltage reduces DC error at the output, important for precision measurement applications.
Supply Voltage Range ±4 V to ±18 V ±2.3 V to ±18 V The AD8422 supports lower supply voltages, enabling use in low-voltage or battery-powered systems where the AD8429 cannot operate.
Quiescent Supply Current 6.5 mA 0.3 mA The AD8422 draws far less current, making it preferable for power-sensitive designs; the AD8429 consumes more for its higher performance.
CMRR (G=100, DC to 60 Hz) 126 dB 120 dB Higher common-mode rejection suppresses interference and ground noise; the AD8429 offers better rejection in precision environments.
Operating Temperature Range -40 °C to +125 °C -40 °C to +85 °C The AD8429 supports a wider temperature range, suitable for harsher environments where the AD8422 may not be rated.
Package 8-Lead SOIC 8-Lead SOIC Identical package and pinout allow direct board-level substitution without layout changes.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8429BRZ AD8422ARZ-RL
Supplier - Analog Devices Inc.
Part Status Active Active
Amplifier Type Instrumentation Instrumentation
Number of Circuits 1 1
Output Type - Rail-to-Rail
Slew Rate 22V/µs 0.8V/µs
-3 dB Bandwidth 15 MHz 2.2 MHz
Current - Input Bias 150 nA 500 pA
Voltage - Input Offset 50 µV 60 µV
Supply Current 6.7mA 300µA
Current - Output / Channel 35 mA 20 mA
Voltage - Supply Span(Min) 8 V 4.6 V
Voltage - Supply Span(Max) 36 V 36 V
Operating Temperature -40°C ~ 125°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the key differences between the AD8429BRZ and AD8422ARZ-RL instrumentation amplifiers?

The AD8429BRZ is a low-noise instrumentation amplifier with a gain range of 1 to 10,000, a typical input voltage noise of 1 nV/√Hz, and a supply range of ±4 V to ±18 V, supplied in an 8-lead SOIC package. The AD8422ARZ-RL is a low-power, low-noise instrumentation amplifier with a gain range of 1 to 1,000, a typical input voltage noise of 8 nV/√Hz, and a supply range of ±2.3 V to ±18 V, supplied in an 8-lead SOIC package in tape-and-reel format. The AD8429BRZ is optimized for ultra-low noise, while the AD8422ARZ-RL is optimized for lower power consumption and wider supply flexibility.

Can the AD8429BRZ and AD8422ARZ-RL be used interchangeably in the same circuit?

No, they are not direct drop-in replacements. Although both are 8-lead SOIC instrumentation amplifiers, they differ in gain range, noise performance, supply voltage range, and quiescent current. The AD8429BRZ supports gains up to 10,000, while the AD8422ARZ-RL supports gains up to 1,000. Circuit gain-setting resistors, supply decoupling, and noise budget must be revalidated before substitution.

How do the noise specifications of the AD8429BRZ and AD8422ARZ-RL compare?

The AD8429BRZ has a typical input voltage noise of 1 nV/√Hz at 1 kHz, making it suitable for ultra-low-noise signal acquisition. The AD8422ARZ-RL has a typical input voltage noise of 8 nV/√Hz at 1 kHz. For applications where noise floor is critical, the AD8429BRZ provides significantly lower input-referred noise.

What are the supply voltage and power consumption differences between the AD8429BRZ and AD8422ARZ-RL?

The AD8429BRZ operates from a supply range of ±4 V to ±18 V with a typical quiescent current of 4.5 mA. The AD8422ARZ-RL operates from a wider supply range of ±2.3 V to ±18 V with a typical quiescent current of 300 µA. The AD8422ARZ-RL is therefore better suited for low-power and single-supply applications, while the AD8429BRZ targets higher-performance, higher-power designs.

What gain ranges do the AD8429BRZ and AD8422ARZ-RL support?

The AD8429BRZ supports gains from 1 to 10,000, set by a single external resistor. The AD8422ARZ-RL supports gains from 1 to 1,000, also set by a single external resistor. Designs requiring gain above 1,000 must use the AD8429BRZ or another amplifier rated for that gain range.

Are the AD8429BRZ and AD8422ARZ-RL available in the same package and pinout?

Both devices are offered in an 8-lead SOIC package. However, the AD8422ARZ-RL is supplied in tape-and-reel format (RL suffix), while the AD8429BRZ is supplied in standard tube or tray packaging depending on the ordering code. Pin functions are similar for both instrumentation amplifiers, but designers must confirm the exact package drawing and pin configuration from the respective manufacturer datasheets before layout.

Which applications are better suited for the AD8429BRZ versus the AD8422ARZ-RL?

The AD8429BRZ is better suited for precision, ultra-low-noise applications such as medical instrumentation, seismic sensors, and high-resolution data acquisition where 1 nV/√Hz noise and gain up to 10,000 are required. The AD8422ARZ-RL is better suited for portable, battery-powered, and low-power industrial signal conditioning where 300 µA quiescent current, wide supply range from ±2.3 V, and 8 nV/√Hz noise are acceptable.

What is the typical bandwidth of the AD8429BRZ and AD8422ARZ-RL at unity gain?

The AD8429BRZ has a typical -3 dB bandwidth of 15 MHz at G = 1. The AD8422ARZ-RL has a typical -3 dB bandwidth of 2.2 MHz at G = 1. The AD8429BRZ therefore provides wider small-signal bandwidth for high-speed signal acquisition, while the AD8422ARZ-RL trades bandwidth for lower power consumption.