AD8544AR
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 1986 PCS
- Package
- SOIC-14
- Series
- Linear - Amplificadores - Instrumentação, OP Amps, Buffer Amps
Esta comparação detalhada entre AD8544AR e AD8541AR-REEL7 fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The AD8541AR-REEL7 is a single-channel CMOS op-amp in the same SOIC-8 package family as the AD8544AR, sharing the AD854x core architecture and rail-to-rail input/output behavior. However, the AD8544AR integrates four independent amplifiers, so the AD8541AR-REEL7 can only serve as a functional substitute where a single amplifier channel is required, not as a direct board-level drop-in for a quad configuration.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8544AR | AD8541AR-REEL7 | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 4 (Quad) | 1 (Single) | Determines how many independent op-amp channels are available in one package; a quad device cannot directly replace a single device in a circuit requiring one amplifier without unused channels being handled. |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | Defines the operating supply window; matching ranges ensure the replacement works in the same power rail configuration. |
| Input Offset Voltage (max) | 6 mV | 6 mV | Sets the worst-case DC error at the input; identical values mean comparable precision in DC signal chains. |
| Gain Bandwidth Product | 1 MHz | 1 MHz | Determines the frequency range over which the amplifier provides useful gain; matching values preserve AC performance. |
| Input Bias Current (typ) | 1 pA | 1 pA | Low bias current is critical for high-impedance sensor interfaces; identical values ensure similar loading effects. |
| Quiescent Current per Amplifier (typ) | 45 µA | 45 µA | Affects power consumption in battery-powered designs; matching per-amplifier current keeps power budgets consistent. |
| Rail-to-Rail Input/Output | Yes | Yes | Rail-to-rail capability maximizes dynamic range on low supply voltages; both sharing this feature supports similar signal swing behavior. |
| Package Type | 14-Lead SOIC | 8-Lead SOIC | Footprint and pin count differ, so a board layout designed for one package cannot directly accept the other without redesign. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | Indicates the environmental range over which specifications are guaranteed; matching ranges confirm suitability for the same application environments. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8544AR | AD8541AR-REEL7 |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Obsolete | Obsolete |
| Amplifier Type | General Purpose | General Purpose |
| Number of Circuits | 4 | 1 |
| Output Type | Rail-to-Rail | Rail-to-Rail |
| Slew Rate | 0.92V/µs | 0.92V/µs |
| Gain Bandwidth Product | 1 MHz | 1 MHz |
| Current - Input Bias | 4 pA | 4 pA |
| Voltage - Input Offset | 1 mV | 1 mV |
| Supply Current | 45µA (x4 Channels) | 45µA |
| Current - Output / Channel | 30 mA | 30 mA |
| Voltage - Supply Span(Min) | 2.7 V | 2.7 V |
| Voltage - Supply Span(Max) | 5.5 V | 5.5 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
The AD8544AR is a quad (four-channel) operational amplifier in a 14-lead SOIC package, while the AD8541AR-REEL7 is a single (one-channel) operational amplifier in an 8-lead SOIC package supplied on tape and reel. Both are rail-to-rail input/output CMOS amplifiers from Analog Devices with similar per-channel performance, but they differ in channel count, package pinout, and packaging format.
Yes. Both devices are specified for single-supply operation from 2.7 V to 5.5 V, and they can also operate from dual supplies within that total range. Designers should confirm the exact limits in the respective Analog Devices datasheets before finalizing the supply design.
No. The AD8544AR uses a 14-lead SOIC package with four amplifiers, while the AD8541AR-REEL7 uses an 8-lead SOIC package with one amplifier. The pin counts, pin functions, and PCB land patterns differ, so they are not drop-in replacements for each other.
The AD8544AR is supplied in a 14-lead SOIC tube or standard package format, whereas the AD8541AR-REEL7 suffix indicates tape-and-reel packaging in an 8-lead SOIC, which is intended for automated high-volume assembly. The "REEL7" designation refers to the tape-and-reel delivery format, not a change in the amplifier's electrical specifications.
Functionally, a single AD8541AR channel has comparable rail-to-rail CMOS amplifier characteristics to one channel of the AD8544AR, but a direct replacement is not possible at the board level because the packages and pinouts differ. Any substitution requires a PCB redesign and verification against the datasheets.
Yes. Both the AD8544AR and AD8541AR-REEL7 are CMOS operational amplifiers featuring rail-to-rail input and output swing, which allows signal swings close to both supply rails. Designers should verify the exact input and output voltage ranges in the Analog Devices datasheets for their specific operating conditions.
The AD8544AR is better suited for multi-channel signal conditioning because it integrates four amplifiers in a single 14-lead SOIC package, reducing board space and component count. The AD8541AR-REEL7 provides only one amplifier per package and is more appropriate for single-channel or space-constrained designs where only one amplifier is needed.