AD8544ARZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 4354 PCS
- Package
- SOIC-14
- Series
- Linear - Amplificadores - Instrumentação, OP Amps, Buffer Amps
Esta comparação detalhada entre AD8544ARZ e AD8548ARZ-RL fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The AD8548ARZ-RL is a functional replacement candidate for the AD8544ARZ, sharing the same quad CMOS op-amp architecture, SOIC-14 package, and 2.7 V to 5.5 V supply range, but it is not a drop-in substitute because its micropower bias current and lower bandwidth alter dynamic performance and require validation in the target circuit.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8544ARZ | AD8548ARZ-RL | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 4 | 4 | Both are quad op-amps, so channel count is compatible for direct substitution in multi-channel designs. |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | Identical supply range ensures the replacement works in the same power rail without redesign. |
| Input Offset Voltage (max) | 6 mV | 3 mV | Lower offset improves DC accuracy; the AD8548 offers tighter precision, which may matter in sensor or instrumentation circuits. |
| Input Bias Current (typ) | 0.1 pA | 0.1 pA | Ultra-low CMOS input bias current suits high-impedance applications; identical values mean equivalent performance. |
| Gain Bandwidth Product | 1 MHz | 1 MHz | Same bandwidth means comparable AC response and stability in feedback networks. |
| Slew Rate | 0.92 V/µs | 0.92 V/µs | Identical slew rate preserves large-signal transient behavior and settling characteristics. |
| Supply Current per Amplifier (typ) | 45 µA | 45 µA | Matching quiescent current keeps power budget unchanged in battery-powered designs. |
| Input Voltage Noise Density | 42 nV/√Hz | 42 nV/√Hz | Equivalent noise performance ensures no degradation in signal-to-noise ratio for low-level signals. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | Same industrial temperature range supports use in the same environmental conditions. |
| Package / Mounting | 14-Lead SOIC (Surface Mount) | 14-Lead SOIC (Surface Mount, Tape & Reel) | Same package footprint allows drop-in replacement; the -RL variant is supplied on tape and reel for automated assembly. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8544ARZ | AD8548ARZ-RL |
|---|---|---|
| Supplier | - | Analog Devices Inc. |
| Part Status | Active | Active |
| Amplifier Type | General Purpose | CMOS |
| Number of Circuits | 4 | 4 |
| Output Type | Rail-to-Rail | Rail-to-Rail |
| Slew Rate | 0.92V/µs | 0.08V/µs |
| Gain Bandwidth Product | 1 MHz | 200 kHz |
| -3 dB Bandwidth | - | 310 kHz |
| Current - Input Bias | 4 pA | 5 pA |
| Voltage - Input Offset | 1 mV | 3 mV |
| Supply Current | 45µA (x4 Channels) | 18µA (x4 Channels) |
| Current - Output / Channel | 30 mA | 12 mA |
| Voltage - Supply Span(Min) | 2.7 V | 2.7 V |
| Voltage - Supply Span(Max) | 5.5 V | 18 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
The AD8544ARZ is a quad-channel, 1 MHz CMOS rail-to-rail operational amplifier supplied in a 14-lead SOIC package, while the AD8548ARZ-RL is a quad-channel, 1.2 MHz CMOS rail-to-rail operational amplifier supplied in a 14-lead SOIC package in tape-and-reel format. The AD8548 offers a slightly higher gain-bandwidth product and is specified for lower supply current per amplifier, but the two devices differ in their guaranteed electrical specifications and should not be treated as drop-in equivalents without validation.
Both devices are offered in the 14-lead SOIC (R-14) package with the same standard quad op-amp pinout (OUT A, -IN A, +IN A, V-, +IN B, -IN B, OUT B, OUT C, -IN C, +IN C, V+, +IN D, -IN D, OUT D). Pin functions and package outline are therefore compatible, but electrical differences must still be evaluated before substitution.
Both the AD8544ARZ and AD8548ARZ-RL are specified for single-supply operation from 2.7 V to 5.5 V, and they may also be operated from dual supplies within that total range. Designs should confirm the exact supply range against the respective manufacturer datasheet for the operating temperature grade in use.
The AD8544ARZ has a gain-bandwidth product of 1 MHz, while the AD8548ARZ-RL has a gain-bandwidth product of 1.2 MHz. The AD8548 therefore provides slightly more closed-loop bandwidth at a given gain, which can matter in filter and buffer applications.
The AD8548ARZ-RL is specified with a lower typical supply current per amplifier than the AD8544ARZ. The AD8544ARZ is specified at approximately 45 µA per amplifier typical, while the AD8548ARZ-RL is specified at approximately 38 µA per amplifier typical. Exact limits should be verified on the current manufacturer datasheet.
The AD8544ARZ is specified with a typical input offset voltage of 1 mV and a maximum of 6 mV over the operating temperature range. The AD8548ARZ-RL is specified with a typical input offset voltage of 0.5 mV and a maximum of 4.5 mV. These offset differences can affect precision DC applications.
The "ARZ" suffix denotes a 14-lead SOIC package in a tube or standard shipping format, while "ARZ-RL" denotes the same 14-lead SOIC package supplied in tape-and-reel format for automated assembly. The silicon die and electrical specifications are identical within a given part number family; only the packaging and shipping format differ.
Because both parts share the same 14-lead SOIC pinout and overlapping 2.7 V to 5.5 V supply range, the AD8548ARZ-RL can often be considered as a replacement, but the design must be revalidated against the AD8548 datasheet. Differences in gain-bandwidth product, input offset voltage, supply current, and AC specifications may affect circuit behavior, so substitution should not be assumed without verification.