AD9747BCPZRL
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 2001 PCS
- Package
- LFCSP-72
- Series
- Acquisição de dados - Convertedores digitais para analógicos (DAC)
Esta comparação detalhada entre AD9747BCPZRL e AD9742ACPZRL7 fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The AD9747BCPZRL and AD9742ACPZRL7 are not drop-in replacements for one another. Although both are dual-channel high-speed digital-to-analog converters from the same manufacturer family, they differ in resolution, output architecture, and speed grade, so the AD9742ACPZRL7 cannot be substituted directly for the AD9747BCPZRL without a full design review and validation of the target application.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD9747BCPZRL | AD9742ACPZRL7 | Why it matters |
|---|---|---|---|
| Resolution | 16 bit | 12 bit | Resolution determines the number of discrete output levels; a 16-bit DAC provides far finer amplitude granularity than a 12-bit DAC, directly affecting signal fidelity and dynamic range. |
| Number of DAC Channels | 2 (dual) | 1 (single) | Channel count determines whether the device can drive two independent outputs (e.g., I/Q paths) or only one, which is fundamental to system architecture and substitutability. |
| Maximum Update Rate | 250 MSPS | 210 MSPS | The maximum sample rate limits the bandwidth of signals that can be synthesized; a higher rate supports wider-band or higher-frequency output generation. |
| Output Type | Current (unbuffered) | Current (unbuffered) | Both are current-output DACs, so the analog interface topology (external I/V conversion) is compatible, easing substitution at the output stage. |
| Supply Voltage | 1.8 V (digital) / 3.3 V (analog) | 3.3 V | Supply requirements affect board-level power design; differing rails mean the power delivery network may need modification when substituting. |
| Package | 72-lead LFCSP | 32-lead LFCSP | Package footprint and pin count must match for a drop-in replacement; different packages require PCB redesign. |
| Interface | Parallel CMOS | Parallel CMOS | A matching digital interface simplifies the FPGA/controller connection, reducing integration effort when swapping parts. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical industrial temperature ranges mean both parts suit the same environmental conditions, supporting interchangeability in rugged applications. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD9747BCPZRL | AD9742ACPZRL7 |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Series | - | TxDAC® |
| Part Status | Active | Active |
| Number of Bits | 16 | 12 |
| Number of D/A Converters | 2 | 1 |
| Settling Time | - | 11ns (Typ) |
| Output Type | Current - Unbuffered | Current - Unbuffered |
| Differential Output | Yes | Yes |
| Data Interface | Parallel | Parallel |
| Reference Type | External, Internal | External, Internal |
| Voltage - Supply, Analog | 3.13V ~ 3.47V | 2.7V ~ 3.6V |
| Voltage - Supply, Digital | 1.7V ~ 1.9V, 3.13V ~ 3.47V | 2.7V ~ 3.6V |
| INL / DNL(LSB) | ±4, ±2 | ±0.5, ±0.4 |
| Architecture | Quad-Switch | Current Source |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The AD9747BCPZRL is a dual-channel, 16-bit, 250 MSPS digital-to-analog converter, while the AD9742ACPZRL7 is a single-channel, 12-bit, 210 MSPS DAC. The AD9747 offers higher resolution and dual-channel operation, whereas the AD9742 provides a single-channel solution with lower resolution and sample rate.
No. The AD9747BCPZRL is supplied in a 72-lead LFCSP package, and the AD9742ACPZRL7 is supplied in a 32-lead LFCSP package. The different package sizes and pin counts mean they are not pin-compatible and cannot be used as drop-in replacements for each other.
The AD9747BCPZRL supports a maximum update rate of 250 MSPS. The AD9742ACPZRL7 supports a maximum update rate of 210 MSPS. Both figures are specified in the respective manufacturer datasheets.
The AD9747BCPZRL provides 16-bit resolution per channel across its two DAC channels. The AD9742ACPZRL7 provides 12-bit resolution on its single DAC channel.
Both devices use a parallel LVCMOS-compatible digital input interface, but the bus width differs according to resolution: the AD9747BCPZRL uses a 16-bit parallel input per channel, while the AD9742ACPZRL7 uses a 12-bit parallel input. Designers must account for the different bus widths when migrating between the two.
No. The AD9742ACPZRL7 is a single-channel device with 12-bit resolution and a different package footprint, so it cannot directly replace the dual-channel, 16-bit AD9747BCPZRL. A redesign of the DAC interface, channel architecture, and PCB layout would be required.
The AD9747BCPZRL is typically used in applications requiring dual high-resolution DACs, such as quadrature transmitters, broadband communications, and instrumentation. The AD9742ACPZRL7 is typically used in single-channel signal synthesis applications such as baseband and intermediate-frequency transmit paths where 12-bit resolution is sufficient.