ADA4077-2ARZ vs ADA4004-4ARZ

Esta comparação detalhada entre ADA4077-2ARZ e ADA4004-4ARZ fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADA4004-4ARZ and ADA4077-2ARZ are not drop-in replacements for one another. The ADA4004-4ARZ is a quad-channel amplifier in a 14-lead SOIC package, while the ADA4077-2ARZ is a dual-channel amplifier in an 8-lead SOIC package, so the two devices differ in channel count, package footprint, and pinout. Designers must verify board layout, channel requirements, and circuit topology before considering any substitution between these part numbers.

Different channel count Different package footprint Different pinout Different board layout required

Parts at a glance

Part A

ADA4077-2ARZ

Analog Devices Inc.

Lifecycle
Active
Stock
5777 PCS
Package
SOIC-8
Series
Linear - Amplificadores - Instrumentação, OP Amps, Buffer Amps
Part B

ADA4004-4ARZ

Analog Devices Inc.

Lifecycle
Active
Stock
4895 PCS
Package
SOIC-14
Series
Linear - Amplificadores - Instrumentação, OP Amps, Buffer Amps

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADA4004-4ARZ ADA4077-2ARZ Why it matters
Number of Amplifiers 4 2 Determines how many independent op-amp channels are available in a single package, directly affecting circuit density and channel count.
Input Offset Voltage (Max) 125 µV 25 µV Lower offset voltage improves DC accuracy and reduces output error in precision signal-conditioning applications.
Input Voltage Noise Density (1 kHz) 1.8 nV/√Hz 7 nV/√Hz Lower voltage noise is critical for low-level signal amplification and high-resolution measurement systems.
Gain Bandwidth Product 12 MHz 3.6 MHz GBW sets the achievable closed-loop bandwidth and slew performance for a given gain configuration.
Slew Rate 2.7 V/µs 1.2 V/µs Slew rate limits large-signal response speed and affects distortion at higher frequencies.
Supply Current per Amplifier (Typ) 1.7 mA 0.4 mA Quiescent current impacts power budget and thermal design, especially in portable or high-channel-count systems.
Input Bias Current (Typ) 90 nA 1 nA Lower bias current reduces errors in high-impedance sensor and feedback networks.
Supply Voltage Range ±5 V to ±15 V ±2.5 V to ±15 V Wider supply range enables operation in low-voltage systems and affects compatibility with existing power rails.
Package 14-Lead SOIC 8-Lead SOIC Package footprint and pin count affect PCB layout, board space, and drop-in compatibility.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADA4077-2ARZ ADA4004-4ARZ
Part Status Active Active
Amplifier Type General Purpose General Purpose
Number of Circuits 2 4
Slew Rate 1.2V/µs 2.7V/µs
Gain Bandwidth Product 3.6 MHz 12 MHz
-3 dB Bandwidth 5.5 MHz -
Current - Input Bias 400 pA 40 nA
Voltage - Input Offset 15 µV 40 µV
Supply Current 400µA (x2 Channels) -
Current - Output / Channel 10 mA 10 mA
Voltage - Supply Span(Min) 5 V 10 V
Voltage - Supply Span(Max) 30 V 30 V
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount
Series - iPolar®

Frequently asked questions

What are the key differences between the ADA4004-4ARZ and ADA4077-2ARZ?

The ADA4004-4ARZ is a quad (four-channel) precision operational amplifier in a 14-lead SOIC package, while the ADA4077-2ARZ is a dual (two-channel) precision op amp in an 8-lead SOIC package. Both are low-noise, low-offset-voltage bipolar amplifiers from Analog Devices, but they differ in channel count, package size, and quiescent current per package.

Are the ADA4004-4ARZ and ADA4077-2ARZ pin-compatible?

No. The ADA4004-4ARZ uses a 14-lead SOIC (R-14) package with four amplifiers, while the ADA4077-2ARZ uses an 8-lead SOIC (R-8) package with two amplifiers. The pin counts, pin functions, and PCB land patterns differ, so they are not drop-in replacements for each other.

What are the supply voltage ranges for these two amplifiers?

Both the ADA4004-4ARZ and ADA4077-2ARZ are specified for dual-supply operation of ±4 V to ±15 V (or equivalent single-supply ranges within that span), per Analog Devices datasheets. Designs should verify the exact specified operating range against the latest manufacturer datasheet before use.

How do the offset voltage and noise specifications compare?

Both parts are precision bipolar amplifiers targeting low offset voltage and low voltage noise. The ADA4004-4ARZ is specified with very low offset voltage (tens of microvolts, typical) and low voltage noise density, and the ADA4077-2ARZ is similarly specified as a low-noise, low-offset precision amplifier. Exact limits should be taken from the respective Analog Devices datasheets, as grades and test conditions affect the guaranteed values.

Can the ADA4077-2ARZ be used to replace one half of an ADA4004-4ARZ design?

Functionally, both are precision op amps, but a direct substitution requires validating package footprint, channel count, supply range, offset, noise, bandwidth, and load-driving requirements against the manufacturer datasheets. Because the packages and channel counts differ, a PCB redesign or adapter would be required; the parts are not interchangeable without design verification.

What are typical applications for these precision amplifiers?

Both the ADA4004-4ARZ and ADA4077-2ARZ are suited to precision signal conditioning such as instrumentation, sensor interfacing, active filtering, and data acquisition front ends where low offset and low noise are important. The quad ADA4004-4ARZ suits multi-channel boards, while the dual ADA4077-2ARZ suits compact two-channel designs.

Do both parts operate over the same temperature range?

Both are offered in industrial temperature grade versions (typically −40 °C to +125 °C) per Analog Devices documentation. Confirm the exact grade and temperature range on the specific ordering part number and datasheet before finalizing a design.