ADF41513BCPZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 6981 PCS
- Package
- WFQFN-24
- Series
- Horário - Geradores de relógios, PLLs, Sintetizadores de Frequências
Esta comparação detalhada entre ADF41513BCPZ e ADF4107BCP fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The ADF41513BCPZ and ADF4107BCP are not drop-in replacements for one another. Although both are integer-N/fractional-N PLL frequency synthesizers from Analog Devices, they differ fundamentally in maximum operating frequency, package footprint, and supply voltage range, requiring board-level redesign and firmware reconfiguration before substitution can be considered.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADF41513BCPZ | ADF4107BCP | Why it matters |
|---|---|---|---|
| Maximum Operating Frequency | 13.5 GHz | 7 GHz | Determines the highest RF input the PLL can synthesize; the ADF41513 covers higher-frequency bands that the ADF4107 cannot reach. |
| PLL Type / Architecture | Fractional-N | Integer-N | Fractional-N allows finer frequency resolution and faster settling, while integer-N is simpler but limited to integer multiples of the reference. |
| Maximum RF Input Frequency (Prescaler) | 13.5 GHz | 7 GHz | The prescaler sets the usable VCO input range; a higher-rated prescaler enables operation with higher-frequency VCOs. |
| Supply Voltage Range | 3.0 V to 3.6 V | 2.7 V to 3.3 V | Defines the compatible power rail; mismatched rails may require level shifting or a different regulator design. |
| Package | 32-Lead LFCSP (5 mm x 5 mm) | 20-Lead LFCSP (4 mm x 4 mm) | Footprint and pin count differ, so a board redesign is required for substitution; the packages are not drop-in compatible. |
| Normalized Phase Noise Floor | -227 dBc/Hz | -219 dBc/Hz | Lower phase noise floor yields cleaner synthesized signals, which is critical for high-performance RF and microwave systems. |
| Maximum Phase Detector Frequency | 125 MHz | 104 MHz | Higher phase detector frequency improves in-band phase noise and allows wider loop bandwidths for faster lock times. |
| Number of PLLs | 1 | 1 | Both are single-PLL synthesizers, so the overall system architecture remains comparable for single-loop designs. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical temperature ratings mean both parts suit the same industrial-grade environmental conditions. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADF41513BCPZ | ADF4107BCP |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Type | Integer-N/Fractional-N | Clock/Frequency Synthesizer (RF) |
| PLL | Yes | Yes |
| Input | CML, CMOS | CMOS |
| Output | Clock | Clock |
| Ratio - Input: Output | 2:1 | 2:1 |
| Differential - Input: Output | Yes/No | Yes/No |
| Frequency - Max | 26.5GHz | 7GHz |
| Divider / Multiplier | Yes/Yes | No/No |
| Voltage - Supply | 3.135V ~ 3.465V | 2.7V ~ 3.3V |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Circuits | 1 | - |
| Operating Temperature | -40°C ~ 105°C | - |
The ADF41513BCPZ is a 13 GHz fractional-N/integer-N PLL frequency synthesizer with an integrated VCO, while the ADF4107BCP is a 7 GHz integer-N PLL frequency synthesizer without an integrated VCO. The ADF41513BCPZ supports fractional-N operation and higher frequency operation, whereas the ADF4107BCP is limited to integer-N operation and lower maximum RF input frequency.
No. The ADF41513BCPZ is supplied in a 32-lead LFCSP package, while the ADF4107BCP is supplied in a 20-lead LFCSP package. The different package sizes, pin counts, and pin functions prevent direct PCB footprint compatibility between the two devices.
The ADF41513BCPZ supports RF input frequencies up to 13 GHz. The ADF4107BCP supports RF input frequencies up to 7 GHz. Designs requiring operation above 7 GHz cannot use the ADF4107BCP.
The ADF41513BCPZ includes an integrated VCO, which simplifies loop filter and board-level design for frequency synthesis. The ADF4107BCP does not include an integrated VCO and requires an external VCO to complete the synthesizer loop.
The ADF41513BCPZ supports both fractional-N and integer-N operation, enabling finer frequency resolution and flexibility in loop design. The ADF4107BCP is an integer-N synthesizer only, so frequency resolution is determined by the phase detector comparison frequency and reference divider settings.
No. The devices differ in package, pin count, frequency range, VCO integration, and fractional-N capability. A direct drop-in replacement is not possible; any substitution requires a full design review against the manufacturer datasheets, including loop filter, reference input, and PCB layout changes.
The ADF41513BCPZ is better suited for high-frequency microwave synthesis because it operates up to 13 GHz and includes an integrated VCO with fractional-N capability. The ADF4107BCP, limited to 7 GHz and integer-N operation without an integrated VCO, is more appropriate for lower-frequency integer-N synthesizer designs.