ADM211EARSZ vs ADM213ARS

Esta comparação detalhada entre ADM211EARSZ e ADM213ARS fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM211EARSZ and ADM213ARS are both RS-232 transceivers from the same ADM2xxE family, sharing a common SOIC-28 wide-body footprint and 5 V single-supply architecture, so the ADM213ARS can serve as a functional replacement candidate for the ADM211EARSZ in most designs. However, the two devices differ in driver/receiver channel count and in the number of on-chip charge-pump capacitors, so the replacement should be validated against the specific interface requirements and board layout before adoption.

Channel Configuration Validation required
Package Type High match
Supply Voltage High match
Charge-Pump Capacitor Count Validation required

Parts at a glance

Part A

ADM211EARSZ

Analog Devices Inc.

Lifecycle
Active
Stock
4657 PCS
Package
SSOP-28
Series
Interface - Condutores, Receptores, Transceivers
Part B

ADM213ARS

Analog Devices Inc.

Lifecycle
Active
Stock
2330 PCS
Package
SSOP-28
Series
Interface - Condutores, Receptores, Transceivers

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM211EARSZ ADM213ARS Why it matters
Number of Drivers 4 4 Driver count determines how many transmit lines the interface can drive; both match here.
Number of Receivers 5 5 Receiver count determines how many receive lines are supported; both match here.
Data Rate 120 kbps 120 kbps Maximum data rate affects compatibility with the host UART and cable length; both are equal.
Supply Voltage 5 V 5 V Operating supply voltage must match the system rail; both are 5 V single-supply devices.
External Capacitors 4 x 0.1 uF 4 x 0.1 uF Charge-pump capacitor count and value affect board layout and BOM; both require four 0.1 uF caps.
Operating Temperature Range -40 to +85 C -40 to +85 C Temperature range determines suitability for industrial vs commercial environments; both are industrial grade.
Package / Case 20-SSOP 24-SSOP Package footprint and pin count must match the PCB layout; these differ, so they are not drop-in replacements.
Pin Count 20 24 Different pin counts mean different footprints and cannot be substituted without a board redesign.
Mounting Type Surface Mount Surface Mount Mounting style must match the assembly process; both are surface-mount devices.
RoHS Compliance Yes Yes RoHS status affects regulatory compliance for shipped products; both are compliant.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM211EARSZ ADM213ARS
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Obsolete
Type Transceiver Transceiver
Protocol RS232 RS232
Number of Drivers/Receivers 4/5 4/5
Duplex Full Full
Receiver Hysteresis 650 mV 650 mV
Data Rate 120Kbps 120Kbps
Voltage - Supply 4.5V ~ 5.5V 4.5V ~ 5.5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the key differences between the ADM211EARSZ and ADM213ARS?

The ADM211EARSZ is a 5 V, dual-channel RS-232 line driver/receiver with two drivers and two receivers, specified over the industrial temperature range and supplied in a 28-lead SSOP package. The ADM213ARS is a 5 V, dual-channel RS-232 transceiver with two drivers and two receivers, specified over the industrial temperature range and supplied in a 28-lead SSOP package. Both integrate charge pump circuitry for single-supply operation, but they differ in external capacitor configuration and specific parametric limits as defined in their respective datasheets.

Are the ADM211EARSZ and ADM213ARS pin-compatible?

Both devices are offered in a 28-lead SSOP package, but pin compatibility must be confirmed against the manufacturer pinout diagrams. The ADM211EARSZ and ADM213ARS share the same package outline, yet the function of individual pins, particularly around the charge pump capacitor connections, may differ. Designers should verify pin assignments in the Analog Devices datasheets before considering a direct board-level substitution.

What supply voltage do the ADM211EARSZ and ADM213ARS require?

Both the ADM211EARSZ and ADM213ARS operate from a single 5 V supply. They include on-chip charge pump converters that generate the positive and negative RS-232 voltage levels required for compliant driver output swings from the single 5 V rail.

How many drivers and receivers do the ADM211EARSZ and ADM213ARS provide?

Each device integrates two RS-232 drivers and two RS-232 receivers. This dual-channel configuration supports two full-duplex or four half-duplex communication lines, making both parts suitable for serial port applications requiring a compact transceiver solution.

Do the ADM211EARSZ and ADM213ARS support data rates suitable for standard RS-232 communication?

Both devices are specified for RS-232 data rates consistent with the standard. The ADM211EARSZ and ADM213ARS datasheets define their maximum guaranteed data rates under specified load conditions. Designers should consult the respective Analog Devices datasheets for the exact guaranteed data rate and capacitive load conditions applicable to each part.

What is the operating temperature range for the ADM211EARSZ and ADM213ARS?

Both the ADM211EARSZ and ADM213ARS are specified for the industrial temperature range of -40°C to +85°C. This makes them suitable for industrial and embedded applications requiring reliable RS-232 communication across a wide ambient temperature span.

Can the ADM211EARSZ and ADM213ARS be used interchangeably in an existing design?

Interchangeability depends on the specific design. Although both are 5 V dual-channel RS-232 transceivers in a 28-lead SSOP package, differences in external capacitor requirements, pin functions, and parametric specifications may affect operation. A direct substitution should only be made after comparing both datasheets and validating the design against the target part's electrical and mechanical requirements.