ADM3055EBRIZ-RL
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 4841 PCS
- Package
- SOIC-20
- Series
- Interface - Condutores, Receptores, Transceivers
Esta comparação detalhada entre ADM3055EBRIZ-RL e ADM3054BRWZ fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The ADM3055EBRIZ-RL is a functionally compatible replacement candidate for the ADM3054BRWZ, sharing the same isolated CAN transceiver function, 5 kV rms isolation rating, and SOIC-16 wide-body footprint, while offering an extended supply voltage range and higher data rate capability. Designers should validate supply voltage compatibility, data rate requirements, and thermal margins before final adoption.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADM3054BRWZ | ADM3055EBRIZ-RL | Why it matters |
|---|---|---|---|
| Data Rate | 1 Mbps | 5 Mbps | Maximum bus speed determines whether the part can support the required network throughput; a 5 Mbps device can replace a 1 Mbps one in most designs but not vice versa. |
| Isolation Rating | 5 kV rms | 5 kV rms | Galvanic isolation protects the bus side from high voltages; matching ratings ensures equivalent safety margin in the application. |
| Supply Voltage (VCC) | 5 V | 5 V | The logic-side supply must match the host controller rail; both parts operate from a 5 V rail, simplifying drop-in substitution. |
| Integrated DC-DC Converter | No | Yes (isoPower) | An integrated isolated DC-DC eliminates the need for an external isolated supply on the bus side, reducing board space and BOM count. |
| Package | 16-Lead SOIC_W | 20-Lead SOIC_W | Different package footprints require layout changes; a direct drop-in replacement is not possible without PCB redesign. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +105°C | A wider temperature range supports harsher industrial environments and provides margin in thermally demanding designs. |
| Number of Channels | 1 Tx / 1 Rx | 1 Tx / 1 Rx | Channel count must match the bus topology; both provide a single bidirectional CAN transceiver channel. |
| Common-Mode Voltage Range | -7 V to +12 V | -7 V to +12 V | The common-mode range defines tolerance to ground potential differences between nodes; matching ranges ensures equivalent bus robustness. |
| Propagation Delay | Typical 70 ns | Typical 60 ns | Lower propagation delay improves loop timing and supports higher data rates; the faster part is generally backward compatible. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADM3055EBRIZ-RL | ADM3054BRWZ |
|---|---|---|
| Series | iCoupler® | iCoupler® |
| Part Status | Active | Active |
| Type | Transceiver, Isolated | Transceiver, Isolated |
| Protocol | CAN | CAN |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Data Rate | 12Mbps | 1Mbps |
| Voltage - Supply | 0.5V ~ 6V | 0.5V ~ 6V |
| Operating Temperature | -40°C ~ 105°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
The ADM3054BRWZ is a 5 kV rms isolated CAN transceiver in a 16-lead SOIC_W package that integrates a digital isolator and a CAN transceiver, supporting data rates up to 1 Mbps. The ADM3055EBRIZ-RL is a 5 kV rms signal and power isolated CAN FD transceiver in a 20-lead SOIC_W package that integrates an isolated DC-to-DC converter (isoPower) to supply power across the isolation barrier, supporting CAN FD data rates up to 12 Mbps. The ADM3055E eliminates the need for a separate isolated power supply, while the ADM3054 requires external isolated power for the bus side.
No. The ADM3054BRWZ uses a 16-lead SOIC_W package, while the ADM3055EBRIZ-RL uses a 20-lead SOIC_W package. The different pin counts and pin functions mean they are not drop-in replacements and require different PCB land patterns.
No. The ADM3054BRWZ supports classic CAN data rates up to 1 Mbps. The ADM3055EBRIZ-RL is designed for CAN FD with data rates up to 12 Mbps, making it suitable for higher-bandwidth applications.
No. The ADM3055EBRIZ-RL integrates an isolated DC-to-DC converter (isoPower) that provides power across the isolation barrier, so no separate isolated supply is needed on the bus side. The ADM3054BRWZ does not integrate isolated power and requires an external isolated supply for the isolated side.
Both the ADM3054BRWZ and the ADM3055EBRIZ-RL are rated for 5 kV rms isolation, suitable for reinforced isolation requirements in industrial CAN networks.
The ADM3054BRWZ occupies a smaller 16-lead SOIC_W footprint and requires an external isolated power supply, which adds board area. The ADM3055EBRIZ-RL uses a larger 20-lead SOIC_W package but integrates isolated power, which can reduce total system footprint by eliminating separate isolated supply components. The optimal choice depends on the overall system architecture.
The ADM3054BRWZ operates from a single 5 V supply on the logic side and requires an external isolated supply for the bus side. The ADM3055EBRIZ-RL operates from a 5 V supply and generates the isolated bus-side power internally through its integrated isoPower DC-to-DC converter.
It can serve as a functional upgrade when CAN FD support and integrated isolated power are desired, but it is not a drop-in replacement. The designer must revise the PCB layout for the 20-lead package, verify the power architecture, and confirm that the integrated isoPower converter meets the application's isolated supply requirements.