ADM3052BRWZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 1935 PCS
- Package
- SOIC-16
- Series
- Interface - Condutores, Receptores, Transceivers
Esta comparação detalhada entre ADM3052BRWZ e ADM3076EARZ fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The ADM3076EARZ and ADM3052BRWZ are both isolated RS-485 transceivers from Analog Devices, but they differ in isolation technology, data rate, and package. The ADM3076EARZ offers a higher 16 Mbps data rate in a narrow-body SOIC-14, while the ADM3052BRWZ provides integrated isolated power via an isoPower DC-to-DC converter in a wider SOIC-16. They are not pin-for-pin drop-in replacements, but the ADM3052BRWZ can serve as a functional substitute where integrated isolated power is required and the higher data rate is not essential.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADM3076EARZ | ADM3052BRWZ | Why it matters |
|---|---|---|---|
| Protocol / Standard | RS-485 / RS-422 | CAN (Controller Area Network) | These devices support fundamentally different serial bus protocols, so they are not functionally interchangeable in a given network. |
| Data Rate | 16 Mbps | 1 Mbps | Maximum bus speed determines throughput and timing compatibility with the host controller and network topology. |
| Number of Transceivers / Channels | 1 driver, 1 receiver (half-duplex) | 1 driver, 1 receiver (CAN transceiver) | Channel configuration affects how the device connects to the bus and whether it supports full- or half-duplex operation. |
| Supply Voltage | 3.0 V to 3.6 V (3.3 V nominal) | 4.5 V to 5.5 V (5 V nominal) | Supply voltage must match the system rail; a mismatch requires level shifting or a different power design. |
| Isolation | Non-isolated | Isolated (galvanic isolation) | Isolation protects against ground loops and high common-mode voltages; substituting a non-isolated part removes this safety barrier. |
| Duplex Mode | Half-duplex | Half-duplex (CAN bus) | Duplex mode determines whether transmit and receive can occur simultaneously and how the bus is wired. |
| Package / Mounting | 8-lead SOIC (surface mount) | 16-lead SOIC (surface mount) | Package footprint and pin count must match the PCB layout for a drop-in replacement. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | The temperature range must cover the application environment for reliable operation. |
| Fail-Safe Receiver | Yes (open/short fail-safe) | Yes (bus fault protection) | Fail-safe behavior ensures a defined logic state when the bus is idle, open, or shorted, preventing undefined outputs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADM3052BRWZ | ADM3076EARZ |
|---|---|---|
| Series | iCoupler® | - |
| Part Status | Active | Active |
| Type | Transceiver, Isolated | Transceiver |
| Protocol | CAN | RS422, RS485 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Data Rate | 1Mbps | 16Mbps |
| Voltage - Supply | 0.5V ~ 6V | 3V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Duplex | - | Full |
| Receiver Hysteresis | - | 100 mV |
The ADM3076EARZ is a 3.3 V, ±15 kV ESD-protected, half-duplex RS-485/RS-422 transceiver in an 8-lead SOIC package, while the ADM3052BRWZ is a 5 kV rms isolated CAN transceiver with an integrated isolated DC-to-DC converter in a 16-lead SOIC_W package. The ADM3076EARZ targets non-isolated RS-485 data links, whereas the ADM3052BRWZ targets isolated CAN bus applications requiring galvanic isolation and an isolated power supply.
No. The ADM3076EARZ uses an 8-lead SOIC package, and the ADM3052BRWZ uses a 16-lead SOIC_W package. They have different pin counts, pin functions, and PCB land patterns, so they are not drop-in replacements for each other.
No. The ADM3076EARZ is an RS-485/RS-422 transceiver, while the ADM3052BRWZ is a CAN transceiver. They are intended for different serial bus standards and cannot be interchanged on the same bus without protocol conversion.
The ADM3076EARZ operates from a single 3.3 V supply. The ADM3052BRWZ operates from a 5 V supply on the logic side and integrates an isolated DC-to-DC converter to provide an isolated supply for the CAN bus side. The supply architectures are therefore not equivalent.
Yes. The ADM3052BRWZ is an isolated CAN transceiver rated for 5 kV rms isolation and includes an integrated isolated DC-to-DC converter. The ADM3076EARZ is a non-isolated RS-485/RS-422 transceiver and does not provide galvanic isolation.
The ADM3076EARZ is specified with ±15 kV ESD protection on the RS-485 bus pins, making it suitable for harsh industrial environments where bus transients are a concern. The ADM3052BRWZ is an isolated CAN device and its ESD and isolation ratings address a different application and protection profile.
No. The ADM3076EARZ is an RS-485/RS-422 transceiver without isolation or a CAN interface, so it cannot replace the ADM3052BRWZ in an isolated CAN application. Substitution would require redesign of the bus interface, isolation, and power architecture.
The ADM3052BRWZ is the appropriate choice for an isolated industrial CAN bus node because it integrates a 5 kV rms isolated CAN transceiver and an isolated DC-to-DC converter. The ADM3076EARZ is intended for non-isolated RS-485/RS-422 links and does not provide CAN or isolation functions.