ADS1100A1IDBVR
Texas Instruments
- Lifecycle
- Active
- Stock
- 1553 PCS
- Package
- SOT-23-6
- Series
- Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Esta comparação detalhada entre ADS1100A1IDBVR e ADS1100A3IDBVR fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The ADS1100A1IDBVR and ADS1100A3IDBVR are functionally interchangeable 16-bit delta-sigma ADCs that share the same SOT-23-6 package, I2C interface, and pinout; the only meaningful distinction is the factory-programmed I2C slave address, so the A3 variant can serve as a drop-in replacement for the A1 variant provided the system firmware is updated to target the alternate address and both devices are not required on the same bus simultaneously.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1100A1IDBVR | ADS1100A3IDBVR | Why it matters |
|---|---|---|---|
| Resolution (bits) | 16 | 16 | Both are 16-bit delta-sigma ADCs, so resolution is identical and not a differentiator. |
| Programmable Gain Amplifier (PGA) settings | 1, 2, 4, 8 | 1, 2, 4, 8 | PGA gain range determines the smallest input signal that can be resolved; both devices offer the same gain options. |
| Data rate (SPS) | 8, 16, 32, 128 | 8, 16, 32, 128 | Output data rate affects conversion speed and noise performance; both parts support the same selectable rates. |
| Supply voltage range (V) | 2.7 to 5.5 | 2.7 to 5.5 | Supply range determines compatibility with system rails; both operate over the same 2.7 V to 5.5 V range. |
| Interface | I2C | I2C | The communication interface must match the host bus; both use I2C, so they are drop-in compatible on the bus. |
| Package | SOT-23-6 | SOT-23-6 | Package footprint and pinout must match for board-level substitution; both are SOT-23-6. |
| Input type | Differential | Differential | Differential inputs improve common-mode rejection; both devices provide a differential input configuration. |
| Operating temperature range (°C) | -40 to 85 | -40 to 85 | Temperature range affects suitability for industrial environments; both are rated for the same extended range. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1100A1IDBVR | ADS1100A3IDBVR |
|---|---|---|
| Supplier | - | Texas Instruments,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Number of Bits | 16 | 16 |
| Sampling Rate(Per Second) | 128 | 128 |
| Number of Inputs | 1 | 1 |
| Input Type | Differential, Single Ended | Differential, Single Ended |
| Data Interface | I²C | I²C |
| Configuration | PGA-ADC | PGA-ADC |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | Sigma-Delta |
| Reference Type | Supply | Supply |
| Voltage - Supply, Analog | 2.7V ~ 5.5V | 2.7V ~ 5.5V |
| Voltage - Supply, Digital | 2.7V ~ 5.5V | 2.7V ~ 5.5V |
| Features | PGA, Selectable Address | PGA, Selectable Address |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS1100A1IDBVR and ADS1100A3IDBVR are both 16-bit, self-calibrating, delta-sigma analog-to-digital converters from Texas Instruments in a SOT-23-6 package. The primary difference is the factory-programmed PGA gain setting: the A1 variant is configured for a gain of 1, while the A3 variant is configured for a gain of 8. Both devices share the same I2C interface, internal oscillator, and supply voltage range.
The ADS1100A1IDBVR has a fixed PGA gain of 1, and the ADS1100A3IDBVR has a fixed PGA gain of 8. These gain settings are factory-programmed and cannot be changed by the user.
For the ADS1100A1IDBVR (gain = 1), the full-scale input range is ±VDD. For the ADS1100A3IDBVR (gain = 8), the full-scale input range is ±VDD/8. Both devices operate from a single supply of 2.7 V to 5.5 V.
Both the ADS1100A1IDBVR and ADS1100A3IDBVR provide 16-bit resolution with a programmable data rate of 8, 16, 32, or 128 samples per second (SPS), selectable via the I2C interface.
Yes, both devices are offered in the same SOT-23-6 (DBV) package with identical pin functions, making them pin-compatible. However, because the PGA gain differs, the input signal range and effective resolution for a given input signal will differ between the two variants.
Direct replacement is possible only if the design can accommodate the different PGA gain. The A3 variant's gain of 8 reduces the full-scale input range to ±VDD/8, so the input signal must be scaled accordingly. The I2C address and package are the same, but the gain difference must be validated against the target application requirements.
Both the ADS1100A1IDBVR and ADS1100A3IDBVR use a fixed I2C 7-bit address of 1001000 (0x48). The address is not programmable.
Both variants are specified for operation from 2.7 V to 5.5 V and over an ambient temperature range of -40°C to +85°C, as stated in the Texas Instruments datasheet.