ADS1246IPWR vs ADS1230IPW

Esta comparação detalhada entre ADS1246IPWR e ADS1230IPW fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS1230IPW and ADS1246IPWR are both 24-bit delta-sigma ADCs, but they differ fundamentally in resolution architecture, input channel configuration, interface protocol, and package footprint. The ADS1230IPW is a single-channel, 20-bit effective bridge sensor ADC with a simple two-wire serial interface in a TSSOP-16 package, while the ADS1246IPWR is a 24-bit, single-channel ADC with an SPI interface and integrated PGA in a TSSOP-16 package. Because the digital interface, programmable gain architecture, and effective resolution differ, the ADS1246IPWR cannot be used as a direct drop-in substitute for the ADS1230IPW without redesign of the host interface, gain configuration, and signal chain validation.

Different interface protocol Different effective resolution Different gain architecture Different reference configuration

Parts at a glance

Part A

ADS1246IPWR

Texas Instruments

Lifecycle
Active
Stock
2336 PCS
Package
TSSOP-16
Series
Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Part B

ADS1230IPW

Texas Instruments

Lifecycle
Active
Stock
2859 PCS
Package
TSSOP-16
Series
Acquisição de dados - Analogo para Convertedores Digitais (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1230IPW ADS1246IPWR Why it matters
Resolution (bits) 20 24 Higher resolution enables finer measurement of small signal changes, which is critical for precision sensor and bridge applications.
Number of input channels 1 (differential) 1 (differential) Both are single-channel differential devices, so channel count is not a differentiator for substitutability.
Input type Differential Differential Differential inputs reject common-mode noise, important for low-level signal acquisition in noisy environments.
Data rate (SPS) 10 or 80 5 to 2000 (programmable) A wider programmable data-rate range allows trade-offs between speed and noise performance for different application needs.
Interface SPI (2-wire, read-only) SPI (4-wire, read/write) A full read/write SPI interface allows configuration of registers and gain, while a read-only interface limits flexibility.
PGA / gain Fixed gain (128) Programmable PGA (1 to 128) A programmable gain amplifier enables adaptation to different sensor signal amplitudes without external circuitry.
Supply voltage 2.7 V to 5.3 V 2.7 V to 5.25 V Similar supply ranges mean both can operate from common 3.3 V or 5 V rails, aiding drop-in replacement.
Package 16-TSSOP 16-TSSOP Identical package and pin count simplify PCB layout compatibility when substituting parts.
Operating temperature range -40 °C to +85 °C -40 °C to +105 °C A wider temperature range supports use in harsher industrial environments.
Internal oscillator Yes Yes An internal oscillator reduces external component count and simplifies system design.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1246IPWR ADS1230IPW
Part Status Active Active
Number of Bits 24 20
Sampling Rate(Per Second) 2k 80
Number of Inputs 1 1
Input Type Differential, Single Ended Differential, Single Ended
Data Interface SPI SPI
Configuration MUX-PGA-ADC PGA-ADC
Number of A/D Converters 1 1
Architecture Sigma-Delta Sigma-Delta
Reference Type External External
Voltage - Supply, Analog 2.7V ~ 5.25V 2.7V ~ 5.3V
Voltage - Supply, Digital 2.7V ~ 5.25V 2.7V ~ 5.3V
Features PGA, Temperature Sensor PGA
Operating Temperature -40°C ~ 105°C -40°C ~ 85°C

Frequently asked questions

What are the key architectural differences between the ADS1230IPW and ADS1246IPWR?

The ADS1230IPW is a 20-bit delta-sigma ADC with a fixed gain of 128 and a single differential input channel, designed primarily for weigh-scale and bridge sensor applications. The ADS1246IPWR is a 24-bit delta-sigma ADC with a programmable gain amplifier (PGA) offering gains from 1 to 128, and it includes a single differential input with additional features such as a programmable data rate, internal oscillator, and SPI-compatible interface. The ADS1230 has a fixed 10 SPS or 80 SPS data rate option, while the ADS1246 offers programmable data rates up to 2 kSPS.

Are the ADS1230IPW and ADS1246IPWR pin-compatible?

No. The ADS1230IPW is offered in a 16-pin TSSOP package, while the ADS1246IPWR is offered in a 20-pin TSSOP package. The pin counts and pin functions differ, so they are not drop-in replacements and require different PCB layouts.

What are the resolution and effective resolution differences between these two ADCs?

The ADS1230IPW provides 20-bit resolution with a fixed gain of 128, achieving approximately 19.5 bits of effective resolution at 10 SPS. The ADS1246IPWR provides 24-bit resolution with a programmable gain amplifier, and its effective resolution depends on the selected gain and data rate; at lower data rates and gain of 1, it can achieve up to 24 bits of noise-free resolution. The ADS1246 generally offers higher raw resolution and more flexibility.

How do the data rates of the ADS1230IPW and ADS1246IPWR compare?

The ADS1230IPW supports two selectable data rates: 10 SPS and 80 SPS. The ADS1246IPWR supports programmable data rates from 5 SPS to 2 kSPS, selectable via register configuration. The ADS1246 therefore offers a wider range of data rates suitable for applications requiring faster sampling.

What are the supply voltage and power consumption characteristics of each device?

The ADS1230IPW operates from a single analog supply of 2.7 V to 5.3 V and a digital supply of 2.7 V to 5.3 V, with typical power consumption of approximately 1.5 mW at 3 V. The ADS1246IPWR operates from an analog supply of 2.7 V to 5.3 V and a digital supply of 2.7 V to 5.3 V, with typical power consumption around 2.3 mW at 3 V in normal mode. Both devices offer low-power operation, but the ADS1230 is optimized for lower power in fixed-gain bridge applications.

Which device is more suitable for weigh-scale and bridge sensor applications?

The ADS1230IPW is specifically designed for weigh-scale and bridge sensor applications, featuring a fixed gain of 128, low noise, and a simple interface with selectable 10 SPS or 80 SPS data rates. The ADS1246IPWR is a more general-purpose 24-bit ADC with a programmable PGA and higher data rates, making it suitable for a broader range of sensor applications but requiring more configuration. For simple, low-power weigh-scale designs, the ADS1230 is often the more direct choice.

What interface and control differences exist between the ADS1230IPW and ADS1246IPWR?

The ADS1230IPW uses a simple two-wire interface with a clock input and a data output, plus a power-down pin; it does not have a standard SPI interface. The ADS1246IPWR uses a full SPI-compatible serial interface with multiple registers for configuration of gain, data rate, and other settings. The ADS1246 offers more control flexibility but requires more complex firmware.

Can the ADS1230IPW and ADS1246IPWR operate from the same supply voltage range?

Yes. Both devices support an analog supply voltage range of 2.7 V to 5.3 V and a digital supply voltage range of 2.7 V to 5.3 V, allowing them to operate from common low-voltage supplies. However, the ADS1246IPWR includes additional internal blocks such as the PGA and oscillator that may influence the exact current consumption at a given supply voltage.