ADS1263IPW
Texas Instruments
- Lifecycle
- Active
- Stock
- 4618 PCS
- Package
- TSSOP-28
- Series
- Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Esta comparação detalhada entre ADS1263IPW e ADS1232IPWRG4 fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The ADS1263IPW and ADS1232IPWRG4 are both high-resolution delta-sigma ADCs from Texas Instruments sharing a TSSOP-28 footprint and wide supply range, but they differ fundamentally in resolution, channel count, and integrated features. The ADS1263IPW offers higher resolution, more input channels, and an integrated PGA and reference, making it a functional upgrade candidate only where the system can accommodate its different digital interface and higher power budget; direct drop-in substitution is not recommended without validation.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1263IPW | ADS1232IPWRG4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 32 | 24 | Higher resolution enables detection of smaller signal changes, which is critical for precision measurement applications. |
| Number of input channels | 10 (5 differential / 10 single-ended) | 2 differential | More channels allow monitoring of multiple sensors with a single ADC, reducing component count and board space. |
| Maximum sample rate | 38.4 kSPS | 80 SPS | A higher sample rate supports faster-changing signals and higher-bandwidth measurement requirements. |
| Interface type | SPI | SPI | The digital interface must match the host microcontroller to ensure reliable communication and firmware compatibility. |
| Integrated PGA | Yes | Yes | An integrated programmable gain amplifier allows direct connection of low-level sensors without external amplification. |
| Supply voltage (analog) | 4.75 V to 5.25 V | 2.7 V to 5.3 V | The analog supply range determines compatibility with the system power rail and low-voltage operation capability. |
| Package | 28-TSSOP | 24-TSSOP | Package footprint and pin count affect PCB layout and whether a drop-in replacement is possible. |
| Operating temperature range | -40 °C to +125 °C | -40 °C to +105 °C | The temperature range must cover the application environment to guarantee specified performance and reliability. |
| Integrated features | PGA, reference, oscillator, sensor bias, GPIO, DAC | PGA, on-chip oscillator | On-chip peripherals reduce external component count and simplify the analog front-end design. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1263IPW | ADS1232IPWRG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Number of Bits | 32 | 24 |
| Sampling Rate(Per Second) | 38k | 80 |
| Number of Inputs | 5, 10 | 2 |
| Input Type | Differential, Single Ended | Differential, Single Ended |
| Data Interface | SPI | SPI |
| Configuration | MUX-PGA-ADC | MUX-PGA-ADC |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | Sigma-Delta |
| Reference Type | External, Internal | External |
| Voltage - Supply, Analog | 5V | 2.7V ~ 5.3V |
| Voltage - Supply, Digital | 2.7V ~ 5.25V | 2.7V ~ 5.3V |
| Features | PGA, Temperature Sensor | PGA |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 105°C |
The ADS1263IPW is a 32-bit, 38-kSPS, 10-channel delta-sigma ADC with an integrated PGA and dual excitation current sources, designed for high-precision sensor measurement. The ADS1232IPWRG4 is a 24-bit, 80-SPS, 2-channel delta-sigma ADC with an integrated PGA, optimized for weigh-scale and bridge sensor applications. The ADS1263 offers higher resolution, faster output data rates, and more input channels, while the ADS1232 provides a simpler, lower-speed signal chain.
No. The ADS1263IPW is supplied in a 28-pin TSSOP (PW) package, while the ADS1232IPWRG4 is supplied in a 24-pin TSSOP (PW) package. The pin counts and pin functions differ, so they are not drop-in replacements and require different PCB land patterns.
The ADS1263IPW supports output data rates up to 38 kSPS in its fastest configuration. The ADS1232IPWRG4 supports a maximum output data rate of 80 SPS. The ADS1263 is therefore suitable for higher-bandwidth signals, while the ADS1232 targets low-speed, high-resolution measurements.
The ADS1263IPW provides 10 input channels (5 differential or 10 single-ended inputs) plus an internal multiplexer. The ADS1232IPWRG4 provides 2 differential input channels. Designs requiring multi-channel sensing should account for this difference.
Yes. Both devices integrate a programmable gain amplifier (PGA) ahead of the delta-sigma modulator. The ADS1263IPW PGA supports gains from 1 to 32, and the ADS1232IPWRG4 PGA supports gains of 1, 2, 64, and 128, per their respective datasheets.
The ADS1263IPW operates from an analog supply (AVDD) of 5 V and a digital supply (DVDD) of 2.7 V to 5.25 V, with an optional negative analog supply for bipolar operation. The ADS1232IPWRG4 operates from a single 5 V analog supply and a 2.7 V to 5.25 V digital supply. Designers should verify exact rails against the manufacturer datasheets.
The ADS1232IPWRG4 is specifically optimized for weigh-scale and bridge sensor applications, offering 24-bit resolution at 80 SPS with a low-noise PGA and two differential inputs. The ADS1263IPW can also be used for such applications but provides higher speed, more channels, and 32-bit resolution, which may exceed the requirements of a basic weigh-scale front end.
Both devices provide an SPI-compatible serial interface, but their register maps, command sets, and timing parameters differ. Firmware written for one device cannot be reused directly on the other without modification according to the respective datasheets.