ADS1274IPAPT vs ADS1278IPAPR

Esta comparação detalhada entre ADS1274IPAPT e ADS1278IPAPR fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS1278IPAPR and ADS1274IPAPT are functionally compatible candidates for replacement, sharing the same TQFP-64 package, 24-bit delta-sigma architecture, and wide supply range. The primary distinction is channel count, with the ADS1278 offering eight channels versus four on the ADS1274, so system channel requirements must be validated before substitution.

Package Type High match
Resolution High match
Channel Count Validation required
Supply Voltage Range High match

Parts at a glance

Part A

ADS1274IPAPT

Texas Instruments

Lifecycle
Active
Stock
4734 PCS
Package
HTQFP-64
Series
Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Part B

ADS1278IPAPR

Texas Instruments

Lifecycle
Active
Stock
1566 PCS
Package
HTQFP-64
Series
Acquisição de dados - Analogo para Convertedores Digitais (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1278IPAPR ADS1274IPAPT Why it matters
Number of input channels 8 4 Determines how many independent analog signals can be sampled simultaneously; a direct functional difference for multi-channel acquisition systems.
Resolution 24 bits 24 bits Sets the dynamic range and precision of the conversion; identical resolution means comparable measurement fidelity.
Max sample rate (per channel) 144 kSPS 144 kSPS Defines the maximum signal bandwidth that can be captured; matching rates support equivalent high-speed acquisition.
Architecture Delta-sigma Delta-sigma The converter topology affects noise shaping, filtering needs, and suitability for precision low-frequency measurements.
Supply voltage (analog) 5 V 5 V Must match the system power rail; identical analog supply simplifies board-level substitution.
Digital supply voltage 1.8 V to 3.3 V 1.8 V to 3.3 V Determines logic-level compatibility with the host controller or FPGA interface.
Interface type SPI / serial (frame-sync) SPI / serial (frame-sync) Defines how data is read out; matching interfaces allow reuse of the same digital host design.
Package 64-pin HTQFP (PowerPAD) 64-pin HTQFP (PowerPAD) Footprint and thermal characteristics must match for a drop-in board replacement; package differences affect layout and assembly.
Operating temperature range -40 °C to +125 °C -40 °C to +125 °C Confirms suitability for industrial and harsh-environment applications; matching ranges support equivalent reliability.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1274IPAPT ADS1278IPAPR
Part Status Active Active
Number of Bits 24 24
Sampling Rate(Per Second) 144k 144k
Number of Inputs 4 8
Input Type Differential Differential
Data Interface SPI SPI
Configuration ADC ADC
Number of A/D Converters 4 1
Architecture Sigma-Delta Sigma-Delta
Reference Type External External
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 1.65V ~ 1.95V 1.65V ~ 1.95V
Operating Temperature -40°C ~ 125°C -40°C ~ 105°C

Frequently asked questions

What are the key differences between the ADS1278IPAPR and ADS1274IPAPT?

The ADS1278IPAPR is an octal (8-channel) 24-bit simultaneous-sampling delta-sigma ADC, while the ADS1274IPAPT is a quad (4-channel) version of the same family. Both share the same 64-pin HTQFP (PAP) package, 24-bit resolution, and selectable data rates up to 144 kSPS in High-Speed mode, but the ADS1278 provides eight differential input channels versus four on the ADS1274.

Are the ADS1278IPAPR and ADS1274IPAPT pin-compatible?

Both devices are offered in the same 64-pin HTQFP (PAP) package, but they are not functionally drop-in replacements because the ADS1278 uses the additional pins for channels 5 through 8, whereas the ADS1274 does not provide those channels. Pin functions must be verified against the respective datasheets before any layout reuse.

What is the maximum data rate of these ADCs?

Both the ADS1278 and ADS1274 support selectable data rates up to 144 kSPS in High-Speed mode, 52 kSPS in High-Resolution mode, 52 kSPS in Low-Power mode, and 10.5 kSPS in Low-Speed mode, per the Texas Instruments datasheet.

What is the resolution and architecture of the ADS1278IPAPR and ADS1274IPAPT?

Both are 24-bit delta-sigma (ΔΣ) analog-to-digital converters with simultaneous sampling of all channels, designed for multi-channel precision measurement applications such as industrial instrumentation and vibration analysis.

What is the difference in power consumption between the two devices?

The ADS1274 (4-channel) consumes less total power than the ADS1278 (8-channel) because it contains fewer converter channels. Per-channel power in each operating mode is comparable across the family; refer to the TI datasheet for exact per-mode supply current specifications.

What digital interfaces do the ADS1278IPAPR and ADS1274IPAPT support?

Both devices provide a flexible serial interface supporting SPI-compatible, Frame-Sync, and Modulator modes, allowing daisy-chaining of multiple devices and direct connection to DSPs and FPGAs.

What is the difference between the IPAPR and IPAPT suffixes?

The "IPAP" portion indicates the industrial temperature range (-40°C to +85°C) 64-pin HTQFP package. The trailing "R" denotes tape-and-reel packaging for the ADS1278IPAPR, while the trailing "T" denotes tube (rail) packaging for the ADS1274IPAPT.

Can the ADS1274IPAPT be used as a substitute where an ADS1278IPAPR is specified?

Only if the design requires no more than four simultaneous channels. The ADS1274 provides four channels versus eight on the ADS1278, so substituting it reduces channel count and requires validation of the channel mapping, firmware, and PCB layout against the target design.