ADS1282IPW vs ADS1281IPWG4

Esta comparação detalhada entre ADS1282IPW e ADS1281IPWG4 fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS1282IPW and ADS1281IPWG4 are both 24-bit delta-sigma ADCs from Texas Instruments in a TSSOP-28 package with identical pin functions and a shared analog supply range, making the ADS1282IPW a strong functional candidate for the ADS1281IPWG4 in most designs. The primary distinction is that the ADS1282IPW integrates a programmable gain amplifier (PGA) and adds a second differential input pair, while the ADS1281IPWG4 is a fixed-gain, single-input device. Engineers should confirm that the additional input multiplexing and PGA configuration of the ADS1282IPW do not alter the intended signal chain, and verify firmware register maps before committing to the substitution.

Resolution and Architecture High match
Package and Pinout High match
Input Configuration Validation required
Supply Voltage Range High match

Parts at a glance

Part A

ADS1282IPW

Texas Instruments

Lifecycle
Active
Stock
4636 PCS
Package
TSSOP-28
Series
Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Part B

ADS1281IPWG4

Texas Instruments

Lifecycle
Active
Stock
6397 PCS
Package
TSSOP-24
Series
Acquisição de dados - Analogo para Convertedores Digitais (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1282IPW ADS1281IPWG4 Why it matters
Resolution (bits) 31 31 Both are 31-bit delta-sigma ADCs, so resolution is equivalent for high-precision measurement applications.
Number of Input Channels 2 (differential) 1 (differential) The ADS1282 provides two differential inputs (with an input multiplexer), while the ADS1281 has a single differential input, affecting multi-sensor designs.
Input Multiplexer Yes (2-channel MUX) No An integrated MUX allows switching between multiple signal sources without external components; the ADS1281 lacks this flexibility.
PGA / Gain Stages Yes (integrated PGA) No The ADS1282 includes a programmable gain amplifier for direct connection of low-level sensors, whereas the ADS1281 requires external signal conditioning.
Data Output Rate (max SPS) 4000 SPS 4000 SPS Both support up to 4000 samples per second, suitable for seismic and high-resolution industrial measurement.
Supply Voltage (analog) 5 V (analog), 1.8–3.3 V (digital) 5 V (analog), 1.8–3.3 V (digital) Identical supply requirements allow drop-in compatibility in the same power architecture.
Interface SPI (serial) SPI (serial) Both use a compatible SPI interface, simplifying firmware reuse across designs.
Package TSSOP-28 TSSOP-24 Different pin counts and footprints mean the two parts are not directly drop-in compatible on the same PCB layout.
Operating Temperature Range -40°C to +85°C -40°C to +85°C Identical industrial temperature ratings support use in the same environmental conditions.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1282IPW ADS1281IPWG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Number of Bits 31 31
Sampling Rate(Per Second) 4k 4k
Number of Inputs 1 1
Input Type Differential Differential, Single Ended
Data Interface SPI SPI
Configuration ADC ADC
Number of A/D Converters 1 1
Architecture Sigma-Delta Sigma-Delta
Reference Type External External
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 1.65V ~ 3.6V 1.65V ~ 3.6V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Features PGA -

Frequently asked questions

What are the key differences between the ADS1282IPW and the ADS1281IPWG4?

The ADS1282IPW is a dual-channel, 32-bit delta-sigma ADC with an integrated programmable gain amplifier (PGA) and a low-noise chopper-stabilized input buffer, housed in a 28-pin TSSOP (PW) package. The ADS1281IPWG4 is a single-channel, 32-bit delta-sigma ADC without an integrated PGA, supplied in a 24-pin TSSOP (PW) package with the G4 lead-finish designation. The ADS1282 provides two differential input channels and on-chip gain settings, while the ADS1281 offers one channel and relies on external signal conditioning for gain.

Are the ADS1282IPW and ADS1281IPWG4 pin-compatible?

No. The ADS1282IPW uses a 28-pin TSSOP package, whereas the ADS1281IPWG4 uses a 24-pin TSSOP package. The differing pin counts and pin functions mean the two devices are not drop-in replacements and require different PCB land patterns.

Do both devices share the same resolution and data rate capabilities?

Both are 32-bit delta-sigma ADCs. The ADS1282 supports data rates from 250 SPS to 4 kSPS with selectable digital filter options, and the ADS1281 supports comparable 32-bit conversion with similar programmable data-rate settings per its datasheet. Designers should confirm the exact data-rate and filter configuration against the respective manufacturer datasheets for the target application.

Does the ADS1282IPW include an integrated PGA while the ADS1281IPWG4 does not?

Yes. The ADS1282IPW integrates a programmable gain amplifier with selectable gains (1, 2, 4, 8, 16, 32, and 64) ahead of the modulator, which allows direct connection of low-level sensors. The ADS1281IPWG4 does not include an on-chip PGA, so external amplification or signal conditioning is required for low-amplitude inputs.

What are the typical applications for each device?

The ADS1282IPW is commonly used in seismic and geophysical data acquisition, energy exploration, and precision sensor measurement where dual channels and integrated gain are beneficial. The ADS1281IPWG4 is typically applied in single-channel high-resolution measurement systems such as precision industrial instrumentation and seismic recording where external front-end conditioning is acceptable.

What does the G4 suffix on the ADS1281IPWG4 indicate?

The G4 suffix denotes a lead-free (Pb-free) finish and green material compliance per Texas Instruments ordering conventions. The ADS1282IPW is also available in Pb-free and green versions; the base part number alone does not guarantee a specific lead finish, so the complete orderable part number should be verified against the manufacturer datasheet.

Can the ADS1281IPWG4 be used as a substitute for the ADS1282IPW in an existing design?

Not directly. The ADS1281IPWG4 is single-channel and lacks the integrated PGA, and it uses a different 24-pin package versus the 28-pin package of the ADS1282IPW. Substitution would require redesign of the analog front end, channel count, and PCB layout, and must be validated against the manufacturer datasheets.