ADS5400IPZP vs ADS5444IPFP

Esta comparação detalhada entre ADS5400IPZP e ADS5444IPFP fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS5400IPZP and ADS5444IPFP are both 12-bit analog-to-digital converters, but they differ fundamentally in sampling rate, analog input bandwidth, package footprint, and power consumption. The ADS5400IPZP offers a 1 GSPS sampling rate in a 100-pin HTQFP package, while the ADS5444IPFP provides 250 MSPS in an 80-pin HTQFP package. These differences in speed, bandwidth, and board layout make direct substitution impractical without significant redesign of the signal chain and PCB.

Different sampling rate Different analog bandwidth Different package footprint Different power consumption

Parts at a glance

Part A

ADS5400IPZP

Texas Instruments

Lifecycle
Active
Stock
7717 PCS
Package
HTQFP-100
Series
Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Part B

ADS5444IPFP

Texas Instruments

Lifecycle
Active
Stock
400 PCS
Package
TQFP-80
Series
Acquisição de dados - Analogo para Convertedores Digitais (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS5400IPZP ADS5444IPFP Why it matters
Resolution 12 bit 13 bit Higher resolution provides finer quantization and better SNR, affecting measurement accuracy and dynamic range.
Sampling Rate 1 GSPS 250 MSPS Maximum sample rate determines the input bandwidth and the highest signal frequency that can be digitized.
Input Type Differential Differential Differential inputs improve common-mode noise rejection and even-order harmonic performance.
Output Interface LVDS (DDR) LVDS (DDR) The digital output format must match the receiving FPGA/ASIC interface for direct compatibility.
Supply Voltage 3.3 V analog / 1.8 V digital 3.3 V analog / 3.3 V digital Supply rail requirements affect board power design and level-shifting needs when substituting parts.
Power Consumption Approx. 2.7 W Approx. 1.4 W Power dissipation impacts thermal design, supply sizing, and overall system efficiency.
Package 100-pin HTQFP (PZP) 80-pin HTQFP (PFP) Package footprint and pin count must match the PCB layout for a drop-in replacement.
Operating Temperature Range -40°C to +85°C -40°C to +85°C Industrial temperature range ensures reliable operation across the intended application environment.
Analog Input Bandwidth Approx. 1.5 GHz Approx. 500 MHz Input bandwidth limits the maximum frequency of signals that can be accurately sampled.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS5400IPZP ADS5444IPFP
Supplier - Rochester Electronics, LLC,Texas Instruments
Part Status Active Active
Number of Bits 12 13
Sampling Rate(Per Second) 1G 250M
Number of Inputs 1 1
Input Type Differential Differential
Data Interface LVDS - Parallel Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture Pipelined Pipelined
Reference Type External, Internal Internal
Voltage - Supply, Analog 3.135V ~ 3.465V, 5V 5V
Voltage - Supply, Digital 3.135V ~ 3.465V 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Features Temperature Sensor -

Frequently asked questions

What are the key differences between the ADS5400IPZP and ADS5444IPFP?

The ADS5400IPZP is a 12-bit, 1-GSPS analog-to-digital converter (ADC) in a 100-pin HTQFP (PZP) package, while the ADS5444IPFP is a 13-bit, 250-MSPS ADC in a 80-pin HTQFP (PFP) package. The ADS5400 offers higher sample rate and lower resolution, whereas the ADS5444 provides higher resolution at a lower sample rate. Both are from Texas Instruments and operate from a 5-V analog supply with LVDS-compatible outputs.

Are the ADS5400IPZP and ADS5444IPFP pin-compatible or package-compatible?

No. The ADS5400IPZP uses a 100-pin HTQFP (PZP) package, and the ADS5444IPFP uses an 80-pin HTQFP (PFP) package. The pin counts, pin functions, and PCB land patterns differ, so they are not drop-in replacements for each other.

What are the maximum sample rates of the ADS5400IPZP and ADS5444IPFP?

The ADS5400IPZP supports a maximum sample rate of 1 GSPS (1,000 MSPS). The ADS5444IPFP supports a maximum sample rate of 250 MSPS. The sample rate difference is a primary selection criterion between the two devices.

What are the resolution and output interface characteristics of each device?

The ADS5400IPZP provides 12-bit resolution with LVDS-compatible DDR output data. The ADS5444IPFP provides 13-bit resolution with LVDS-compatible DDR output data. Both devices are designed for high-speed signal acquisition and use differential clock and analog inputs.

What are the analog supply and power requirements for the ADS5400IPZP and ADS5444IPFP?

Both devices operate from a 5-V analog supply (AVDD) and require a separate 3.3-V digital supply (DVDD) for their output and digital circuitry, consistent with the Texas Instruments datasheets. Designers should verify the exact recommended operating conditions and decoupling requirements in the respective datasheets before finalizing the power design.

Can the ADS5400IPZP and ADS5444IPFP be used in the same signal chain or application?

They serve different roles. The ADS5400IPZP is suited to very high sample rate applications such as wideband digitizers, radar, and test instrumentation where 1 GSPS is required. The ADS5444IPFP is suited to applications needing 13-bit resolution at up to 250 MSPS, such as medical imaging and communications receivers. They are not interchangeable in a given socket without redesign.

What input and clock interface do the ADS5400IPZP and ADS5444IPFP use?

Both ADCs use differential analog inputs and differential clock inputs, and both provide LVDS-compatible DDR output data. The ADS5400IPZP is specified for a 1-GSPS maximum clock rate, while the ADS5444IPFP is specified for a 250-MSPS maximum clock rate. Exact input voltage ranges and clock requirements should be confirmed in the respective Texas Instruments datasheets.

Which device should be selected for higher resolution versus higher speed?

Select the ADS5444IPFP when 13-bit resolution is the priority and the signal bandwidth fits within a 250-MSPS sample rate. Select the ADS5400IPZP when a 1-GSPS sample rate is required and 12-bit resolution is sufficient. The choice depends on the application's dynamic range and bandwidth requirements.