ADS7809U
Texas Instruments
- Lifecycle
- Active
- Stock
- 6471 PCS
- Package
- SOIC-20
- Series
- Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Esta comparação detalhada entre ADS7809U e ADS7811U fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The ADS7809U and ADS7811U share the same 16-bit SAR ADC architecture, 5 V supply, and pin-compatible 28-pin SOIC footprint, making the ADS7811U a viable functional replacement candidate for the ADS7809U in most designs. Designers should validate the higher throughput and slightly reduced SNR against system requirements before final qualification.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7809U | ADS7811U | Why it matters |
|---|---|---|---|
| Resolution | 16 bits | 16 bits | Both converters provide 16-bit resolution, so they offer the same nominal precision and are interchangeable in terms of quantization step size. |
| Sampling Rate | 100 kSPS | 250 kSPS | The ADS7811U supports a higher throughput, which matters for faster signal acquisition; the ADS7809U may be insufficient for high-speed sampling applications. |
| Input Configuration | Single-ended | Pseudo-differential | Input topology affects how signals are connected and common-mode rejection; pseudo-differential inputs can reject ground noise better than single-ended inputs. |
| Interface Type | Serial (SPI/QSPI compatible) | Parallel | The digital interface determines microcontroller/FPGA pin requirements and firmware; serial vs parallel interfaces are not directly interchangeable without redesign. |
| Supply Voltage | 5 V | 5 V | Both operate from a 5 V supply, so power rail requirements are compatible between the two parts. |
| Package | 28-pin SOIC | 28-pin SOIC | Matching package and pin count simplifies board-level substitution, though pinout differences must still be verified. |
| Reference | Internal reference | Internal reference | Both include an internal reference, reducing external component count and simplifying the analog front-end design. |
| Power Consumption | Approximately 100 mW | Approximately 155 mW | Lower power dissipation in the ADS7809U benefits thermally constrained or battery-powered designs, while the ADS7811U trades power for speed. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7809U | ADS7811U |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC,Texas Instruments |
| Part Status | Active | Active |
| Number of Bits | 16 | 16 |
| Sampling Rate(Per Second) | 100k | 250k |
| Number of Inputs | 1 | 1 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI, DSP | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External, Internal | External, Internal |
| Voltage - Supply, Analog | 5V | ±5V |
| Voltage - Supply, Digital | 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -25°C ~ 85°C |
The ADS7809U is a 16-bit successive-approximation ADC with a 10 µs conversion time and a 100 kHz sampling rate, while the ADS7811U is a 16-bit SAR ADC with a 5 µs conversion time and a 200 kHz sampling rate. Both are offered in a 28-pin SOIC package and operate from a +5 V supply, but the ADS7811U provides faster throughput and shorter conversion time.
Yes. Both devices are specified in the same 28-pin SOIC (DW) package with the same pinout, allowing the ADS7811U to be used as a drop-in replacement for the ADS7809U in existing PCB layouts, provided the faster timing and interface requirements are accommodated.
Both the ADS7809U and ADS7811U are 16-bit successive-approximation register (SAR) analog-to-digital converters. They provide no missing codes over the full 16-bit range and are designed for high-accuracy industrial measurement applications.
The ADS7809U supports a maximum sampling rate of 100 kHz, while the ADS7811U supports a maximum sampling rate of 200 kHz. The higher rate of the ADS7811U results from its shorter 5 µs conversion time versus 10 µs for the ADS7809U.
Yes. Both the ADS7809U and ADS7811U operate from a single +5 V analog and digital supply. Each device includes an internal reference and a track-and-hold amplifier, reducing external component count.
Both devices provide a parallel 16-bit digital output interface with standard microprocessor-compatible control signals, including chip select, read, and convert start. The interface timing differs because of the different conversion times, so timing parameters must be verified against each device's datasheet.
Because the two devices share the same 28-pin SOIC package and pinout, the ADS7811U can be a drop-in replacement in many designs. However, the system timing, clocking, and read-cycle margins must be revalidated against the ADS7811U datasheet to confirm compatibility with the faster conversion time.