ADS7844N vs ADS7841EG4

Esta comparação detalhada entre ADS7844N e ADS7841EG4 fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS7841EG4 is a functional replacement candidate for the ADS7844N, sharing the same 12-bit SAR architecture, SPI interface, and 4-channel input multiplexer. However, the ADS7844N offers a higher 200 kSPS throughput versus 200 kSPS-class operation and a wider supply range, while the ADS7841EG4 provides a single-supply 5 V design in a smaller SOIC-16 package. Designers should validate sampling rate headroom, supply configuration, and package footprint before substituting.

Resolution and Architecture High match
Interface Type High match
Package Type Validation required
Supply Voltage Range Validation required

Parts at a glance

Part A

ADS7844N

Texas Instruments

Lifecycle
Active
Stock
1495 PCS
Package
SSOP-20
Series
Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Part B

ADS7841EG4

Texas Instruments

Lifecycle
Active
Stock
8773 PCS
Package
SSOP-16
Series
Acquisição de dados - Analogo para Convertedores Digitais (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7844N ADS7841EG4 Why it matters
Number of Input Channels 8 (single-ended) / 4 (differential) 4 (single-ended) / 2 (differential) Determines how many analog signals can be measured; a direct constraint on system channel count and substitutability.
Resolution 12 bit 12 bit Both provide 12-bit resolution, so measurement precision is equivalent between the two parts.
Sampling Rate 200 kSPS 200 kSPS Maximum throughput; identical rates mean comparable speed for signal acquisition.
Supply Voltage 2.7 V to 5.25 V 2.7 V to 5.25 V Operating supply range must match the system rail; identical ranges allow drop-in power compatibility.
Interface Type SPI / Serial SPI / Serial Digital communication protocol must match the host controller; both use serial SPI-compatible interfaces.
Package / Mounting 20-SSOP (Surface Mount) 16-SSOP (Surface Mount) Different pin counts and footprints affect PCB layout and whether the parts are physically interchangeable.
Input Type Single-ended / Differential Single-ended / Differential Both support single-ended and differential inputs, enabling similar signal conditioning flexibility.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Thermal range must cover the application environment; identical ranges ensure equivalent environmental tolerance.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7844N ADS7841EG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Number of Bits 12 12
Sampling Rate(Per Second) 200k 200k
Number of Inputs 4, 8 4
Input Type Differential, Single Ended Single Ended
Data Interface SPI SPI
Configuration MUX-S/H-ADC MUX-S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External External
Voltage - Supply, Analog 2.7V ~ 3.6V, 5V 2.7V ~ 3.6V, 5V
Voltage - Supply, Digital 2.7V ~ 3.6V, 5V 2.7V ~ 3.6V, 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 125°C

Frequently asked questions

What are the key architectural differences between the ADS7844N and ADS7841EG4?

The ADS7844N is an 8-channel, 12-bit successive-approximation ADC with a serial interface, housed in a 20-pin PDIP package. The ADS7841EG4 is a 4-channel, 12-bit successive-approximation ADC with a serial interface, supplied in a 16-pin SSOP package. The primary differences are channel count (8 vs 4) and package type (PDIP vs SSOP).

Are the ADS7844N and ADS7841EG4 pin-compatible?

No. The ADS7844N uses a 20-pin PDIP package while the ADS7841EG4 uses a 16-pin SSOP package. The pin counts and package footprints differ, so they are not drop-in replacements and require different PCB land patterns.

Do both devices support the same analog input configuration?

Both are 12-bit SAR ADCs with single-ended and differential input capability, but the ADS7844N provides 8 input channels while the ADS7841EG4 provides 4 input channels. The channel count difference affects multiplexer configuration and the number of measurable signals.

What is the resolution and sampling architecture of these converters?

Both the ADS7844N and ADS7841EG4 are 12-bit successive-approximation register (SAR) analog-to-digital converters with a serial SPI-compatible interface, providing 12-bit resolution for their respective input channels.

Can the ADS7841EG4 replace the ADS7844N in an existing design?

Not directly. Because the ADS7841EG4 has only 4 input channels versus 8 on the ADS7844N, and uses a different package (16-pin SSOP vs 20-pin PDIP), a replacement requires PCB redesign, reduced channel count, and validation against the manufacturer datasheet for the target design.

What supply voltage range do these ADCs operate on?

Both devices are specified for single-supply operation in the 2.7 V to 5.25 V range, making them suitable for low-power and mixed 3.3 V/5 V systems. Designers should confirm exact limits in the respective manufacturer datasheets.

Which device is better suited for higher channel-count applications?

The ADS7844N is better suited for higher channel-count applications because it provides 8 analog input channels, whereas the ADS7841EG4 provides only 4 channels. For designs needing more than four inputs, the ADS7844N avoids adding an external multiplexer.