ADS7866IDBVR
Texas Instruments
- Lifecycle
- Active
- Stock
- 1287 PCS
- Package
- SOT-23-6
- Series
- Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Esta comparação detalhada entre ADS7866IDBVR e ADS7887SDCKR fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The ADS7887SDCKR and ADS7866IDBVR are both 12-bit micropower SAR analog-to-digital converters sharing a compatible serial interface and similar supply requirements, making them a viable functional replacement candidate. However, the ADS7887SDCKR offers a higher throughput rate while the ADS7866IDBVR provides a wider input voltage range, so the design must be validated against the specific sampling rate and input span requirements of the target application.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7887SDCKR | ADS7866IDBVR | Why it matters |
|---|---|---|---|
| Resolution | 12 bit | 12 bit | Both converters provide 12-bit resolution, so the achievable measurement granularity is equivalent. |
| Sampling Rate | 1 MSPS | 200 kSPS | The ADS7887 supports a much higher throughput, which matters for fast-changing signals and high-speed acquisition systems. |
| Number of Input Channels | 1 (single-ended) | 1 (single-ended) | Both are single-channel devices, so channel count is not a differentiator for substitutability. |
| Supply Voltage | 2.35 V to 5.25 V | 1.6 V to 3.6 V | The supply ranges differ significantly; the ADS7866 suits low-voltage logic systems while the ADS7887 supports higher supply rails. |
| Interface Type | SPI (serial) | SPI (serial) | Both use a serial SPI-compatible interface, simplifying drop-in replacement at the digital interface level. |
| Package | SOT-23-6 (DCK) | SOT-23-6 (DBV) | Both are offered in a 6-pin SOT-23 package, but the package codes differ, so footprint and pinout should be verified before substitution. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +85 °C | The wider temperature range of the ADS7887 makes it suitable for harsher environments where the ADS7866 may not be rated. |
| Power Consumption | Approx. 3.5 mW at 3 V, 1 MSPS | Approx. 1.1 mW at 3 V, 200 kSPS | Lower power per conversion favors the ADS7866 in battery-powered designs, while the ADS7887 trades power for speed. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7866IDBVR | ADS7887SDCKR |
|---|---|---|
| Series | microPOWER™ | microPOWER™ |
| Part Status | Active | Active |
| Number of Bits | 12 | 10 |
| Sampling Rate(Per Second) | 200k | 1.25M |
| Number of Inputs | 1 | 1 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI | SPI |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | Supply |
| Voltage - Supply, Analog | 1.2V ~ 3.6V | 2.35V ~ 5.25V |
| Voltage - Supply, Digital | 1.2V ~ 3.6V | 2.35V ~ 5.25V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 125°C |
The ADS7887SDCKR is a 10-bit, 1-MSPS micropower SAR ADC in a 6-pin SC70 package, while the ADS7866IDBVR is a 12-bit, 200-kSPS micropower SAR ADC in a 6-pin SOT-23 package. The ADS7887 offers higher sample rate and lower resolution, whereas the ADS7866 provides higher resolution at a lower throughput.
No. The ADS7887SDCKR uses a 6-pin SC70 (DCK) package, and the ADS7866IDBVR uses a 6-pin SOT-23 (DBV) package. Although both are 6-pin micropower SAR ADCs, the package outlines and PCB land patterns differ, so they are not drop-in footprint compatible.
The ADS7887SDCKR provides 10-bit resolution with a maximum throughput of 1 MSPS. The ADS7866IDBVR provides 12-bit resolution with a maximum throughput of 200 kSPS. Designs requiring finer quantization should favor the ADS7866, while higher-speed sampling favors the ADS7887.
Both devices operate from a single 2.7 V to 5.5 V supply, making them suitable for low-power, mixed-signal systems that share a common analog supply rail. Always confirm the exact recommended operating conditions in the respective manufacturer datasheets.
Both are micropower SAR converters designed for low-power operation, with consumption scaling with supply voltage and throughput. Because the ADS7887SDCKR runs at up to 1 MSPS and the ADS7866IDBVR at up to 200 kSPS, average power in a given system depends strongly on the actual sampling rate; consult the datasheet power curves for each device at the intended VDD and throughput.
Both devices provide a serial digital output compatible with SPI/QSPI/MICROWIRE-style interfaces, allowing direct connection to common microcontrollers and DSPs. The frame length differs because the ADS7887 outputs 10 bits and the ADS7866 outputs 12 bits, so host firmware must be configured accordingly.
Not directly. They differ in resolution (10-bit vs 12-bit), maximum throughput (1 MSPS vs 200 kSPS), and package (SC70 vs SOT-23). A replacement requires verifying the digital frame format, timing, PCB land pattern, and whether the system needs the higher resolution of the ADS7866 or the higher speed of the ADS7887.