ADS8320E/2K5
Texas Instruments
- Lifecycle
- Active
- Stock
- 4183 PCS
- Package
- VSSOP-8
- Series
- Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Esta comparação detalhada entre ADS8320E/2K5 e ADS8321E/250G4 fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The ADS8321E/250G4 is a viable functional replacement candidate for the ADS8320E/2K5, sharing the same 16-bit SAR architecture, SPI interface, and MSOP-8 footprint, though the differing sampling rate and supply voltage range require design validation before substitution.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS8320E/2K5 | ADS8321E/250G4 | Why it matters |
|---|---|---|---|
| Resolution | 16 bit | 16 bit | Both are 16-bit SAR ADCs, so resolution is identical and not a differentiator for substitutability. |
| Sampling Rate | 100 kSPS | 100 kSPS | Identical maximum throughput means either part can meet the same sampling requirements. |
| Supply Voltage (Analog & Digital) | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Same wide supply range allows both to operate from common 3.3 V or 5 V rails. |
| Input Type | Single-ended, pseudo-differential | Single-ended, pseudo-differential | Matching input configuration ensures the same signal chain topology can be reused. |
| Interface | SPI-compatible serial | SPI-compatible serial | Identical serial interface allows drop-in replacement without firmware changes. |
| Package | 8-pin VSSOP (MSOP) | 8-pin VSSOP (MSOP) | Same package footprint enables direct PCB substitution. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical temperature ratings suit the same industrial environments. |
| Power Consumption | ~1.8 mW at 100 kSPS, 5 V | ~1.8 mW at 100 kSPS, 5 V | Equivalent power draw means thermal and supply budgeting remain unchanged. |
| Reference Input | External reference | External reference | Both require an external reference, so the same reference circuit can be shared. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS8320E/2K5 | ADS8321E/250G4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Series | microPOWER™ | microPOWER™ |
| Part Status | Active | Discontinued at Digi-Key |
| Number of Bits | 16 | 16 |
| Sampling Rate(Per Second) | 100k | 100k |
| Number of Inputs | 1 | 1 |
| Input Type | Pseudo-Differential, Single Ended | Differential, Pseudo-Differential, Single Ended |
| Data Interface | SPI | SPI |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | External |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS8320E/2K5 is a 16-bit, 100-kSPS micropower SAR ADC with a pseudo-differential input, while the ADS8321E/250G4 is a 16-bit, 100-kSPS SAR ADC with a fully differential input. Both operate from a 2.7-V to 5.25-V supply and are pin-compatible in the same 8-pin VSSOP package, but the ADS8321 offers a differential input structure and a different SPI interface timing/frame format.
Yes. Both devices are offered in the same 8-pin VSSOP (DGK) package with the same pinout, so they are pin-compatible. However, pin compatibility does not guarantee functional interchangeability; the input configuration and digital interface behavior differ and must be validated in the target design.
Both the ADS8320E/2K5 and ADS8321E/250G4 are 16-bit successive-approximation register (SAR) analog-to-digital converters with a maximum throughput of 100 kSPS.
Both devices operate from a single supply of 2.7 V to 5.25 V, making them suitable for low-power and battery-operated systems.
The ADS8320E/2K5 has a pseudo-differential input (one input is referenced to a fixed potential), whereas the ADS8321E/250G4 provides a fully differential input, which can improve common-mode rejection and signal swing in differential signal chains.
Both devices use an SPI-compatible serial interface. The ADS8320E/2K5 uses a standard SPI frame with a chip-select and serial clock, while the ADS8321E/250G4 uses a similar serial interface but with a different data frame/timing format; consult the respective datasheets before reusing firmware.
Both are micropower SAR ADCs designed for low power consumption at 100 kSPS. Exact supply current and power figures depend on supply voltage and sample rate; refer to the manufacturer datasheets for verified typical and maximum values.
Not without validation. Although the packages and pinouts match, the ADS8321E/250G4 has a fully differential input and a different serial frame format, so the analog front end, reference configuration, and firmware must be verified against the ADS8321 datasheet before substitution.