ADS8555SPMR
Texas Instruments
- Lifecycle
- Active
- Stock
- 2733 PCS
- Package
- LQFP-64
- Series
- Acquisição de dados - Analogo para Convertedores Digitais (ADC)
Esta comparação detalhada entre ADS8555SPMR e ADS8548SPMR fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The ADS8555SPMR and ADS8548SPMR are both 16-bit SAR analog-to-digital converters from Texas Instruments sharing the same LQFP-64 package and 5 V analog supply architecture, making them strong functional replacement candidates. The primary distinction is channel configuration: the ADS8555SPMR provides six simultaneous-sampling channels while the ADS8548SPMR provides eight, so the replacement is viable only when the reduced channel count is acceptable to the application. Interface, resolution, and package alignment support a straightforward substitution with validation of channel-count requirements.
Texas Instruments
National Semiconductor
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS8555SPMR | ADS8548SPMR | Why it matters |
|---|---|---|---|
| Resolution | 16 bit | 14 bit | Higher resolution provides finer quantization and better dynamic range, directly affecting measurement accuracy and substitutability in precision applications. |
| Number of Input Channels | 6 single-ended / 3 differential | 8 single-ended / 4 differential | Channel count determines how many signals can be sampled; a mismatch changes system architecture and PCB routing requirements. |
| Sampling Rate (max) | 630 kSPS | 630 kSPS | Maximum throughput must meet the timing budget of the acquisition system; identical rates ease drop-in replacement. |
| Supply Voltage (analog) | 5 V | 5 V | Analog supply defines input range and interface levels; matching values simplify power-rail reuse. |
| Interface | Parallel / Serial (SPI) | Parallel / Serial (SPI) | Interface compatibility determines whether the host controller firmware and bus wiring can be reused without redesign. |
| Input Type | Pseudo-differential, single-ended | Pseudo-differential, single-ended | Input configuration affects signal conditioning circuitry and common-mode handling; identical types allow the same front-end design. |
| Package | LQFP-64 | LQFP-64 | Package and pinout compatibility is essential for physical drop-in substitution on an existing PCB footprint. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | Temperature range must cover the application environment; matching ranges ensure equivalent reliability margins. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS8555SPMR | ADS8548SPMR |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Active |
| Number of Bits | 16 | 14 |
| Sampling Rate(Per Second) | 630k | 600k |
| Number of Inputs | 6 | 8 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI, Parallel | SPI, Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External, Internal | External, Internal |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 2.7V ~ 3.6V, 5V | 2.7V ~ 5.5V |
| Features | Simultaneous Sampling | Simultaneous Sampling |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
The ADS8555SPMR is a 6-channel, 16-bit simultaneous-sampling SAR ADC, while the ADS8548SPMR is an 8-channel, 14-bit simultaneous-sampling SAR ADC. Both are members of the Texas Instruments ADS85xx family and share the same LQFP-64 package footprint, but they differ in channel count and resolution.
Both devices are offered in a 64-pin LQFP (PM) package. However, the pinout is not identical because the ADS8555SPMR provides 6 analog input channels and the ADS8548SPMR provides 8 analog input channels, so the analog input pin assignments differ. Designers must verify pin functions against each device's datasheet before considering any board-level substitution.
Both the ADS8555SPMR and ADS8548SPMR support a maximum throughput of 630 kSPS per channel in parallel interface mode. The internal conversion clock and simultaneous-sampling architecture allow all channels to be sampled at the same instant.
Both devices support bipolar analog input ranges of ±10 V, ±5 V, and ±2.5 V, as well as a 0 V to 5 V unipolar range, configured through the internal register settings. The input range selection is programmable via the SPI-compatible serial interface.
Both devices provide a parallel interface and a serial (SPI-compatible) interface for reading conversion results. The parallel interface supports 16-bit word reads, while the serial interface supports daisy-chain configuration for multi-device systems.
No. Although both share the same 64-pin LQFP package and belong to the same family, the ADS8548SPMR has 8 channels at 14-bit resolution versus 6 channels at 16-bit resolution for the ADS8555SPMR. The differing channel count, resolution, and analog input pin assignments mean a direct drop-in replacement is not possible without design and firmware changes.
Both devices are intended for applications requiring simultaneous sampling of multiple analog channels, such as motor control, power quality monitoring, protective relays, and multi-axis data acquisition systems. The ADS8555SPMR's higher 16-bit resolution suits precision measurement, while the ADS8548SPMR's 8 channels suit higher-channel-count monitoring.