AFE5832ZBV
Texas Instruments
- Lifecycle
- Active
- Stock
- 2381 PCS
- Package
- FBGA-289
- Series
- Acquisição de dados - Front End analógico (AFE)
Esta comparação detalhada entre AFE5832ZBV e AFE5832LPZAV fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The AFE5832LPZAV and AFE5832ZBV are functionally compatible ultrasound analog front-end devices sharing the same channel count, package footprint, and core architecture, making them viable candidates for substitution. However, the LP variant introduces a low-power operating mode that reduces power consumption at the expense of certain performance parameters, so designers must validate signal-chain performance and power budget requirements against the target application before finalizing the replacement.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AFE5832LPZAV | AFE5832ZBV | Why it matters |
|---|---|---|---|
| Package / Case | 100-TQFP (14x14) | 289-NFBGA (15x15) | Footprint and PCB layout differ, so the two parts are not drop-in board-level replacements. |
| Number of Channels | 32 | 32 | Channel count defines the ultrasound front-end capacity; both provide 32 receive channels. |
| ADC Resolution | 12 bit | 12 bit | Resolution sets the dynamic range and quantization noise of the digitized echo signal. |
| Maximum Sample Rate | 80 MSPS | 80 MSPS | Sample rate determines the achievable imaging depth and axial resolution. |
| Supply Voltage (Analog) | 1.8 V / 3.3 V | 1.8 V / 3.3 V | Supply rails must match the board power design for correct biasing and signal swing. |
| Interface | LVDS | LVDS | The digital output interface must be compatible with the downstream FPGA/ASIC receiver. |
| Operating Temperature Range | 0°C to 70°C | 0°C to 70°C | Thermal range affects suitability for commercial versus harsher environments. |
| Pin Count | 100 | 289 | Different pin counts confirm the packages are physically incompatible and require different PCB footprints. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AFE5832ZBV | AFE5832LPZAV |
|---|---|---|
| Supplier | Texas Instruments | - |
| Part Status | Active | Active |
| Number of Bits | 12 | 10, 12 |
| Number of Channels | 32 | 32 |
| Power (Watts) | 42 mW | - |
| Voltage - Supply, Analog | 3V ~ 3.3V | - |
| Voltage - Supply, Digital | 3V ~ 3.3V | - |
| Mounting Type | Surface Mount | Surface Mount |
Both are Texas Instruments AFE5832 family fully integrated analog front ends (AFEs) for ultrasound imaging, integrating a multichannel low-noise amplifier (LNA), variable-gain amplifier (VGA), anti-aliasing filter, and 12-bit analog-to-digital converter (ADC) with digital time-gain compensation and continuous-wave (CW) Doppler processing. The AFE5832LPZAV is the low-power variant, while the AFE5832ZBV is the standard-power variant of the same AFE5832 platform.
The primary difference is power consumption versus performance: the AFE5832LPZAV ("LP" suffix) is specified for reduced power operation, while the AFE5832ZBV is the standard-power device. Designers should confirm the exact per-channel power and noise specifications in the respective TI datasheets before selecting between them.
Both devices are offered in the same ZAV package family (a BGA-type package) within the AFE5832 platform, so they share a common package and pinout. However, because the LP and standard variants differ in power/performance specifications, a direct drop-in substitution should only be made after verifying supply, timing, and thermal requirements against the TI datasheets.
The AFE5832 family integrates 32 channels of LNA, VGA, and anti-aliasing filter feeding 12-bit ADCs, with on-chip CW Doppler mixers and digital processing. Both the AFE5832LPZAV and AFE5832ZBV share this 32-channel, 12-bit architecture.
They are functionally similar members of the same AFE5832 platform, but the low-power (LP) and standard variants have different power and potentially different noise/performance specifications. Interchangeability must be validated against the target design's power budget, thermal limits, and image-quality requirements using the official TI datasheets.
Both devices target medical ultrasound imaging systems, including portable and cart-based scanners, where multichannel receive signal chains with integrated CW Doppler are required. The LP variant is oriented toward power-sensitive portable systems, while the standard variant suits applications prioritizing performance over power.
Authoritative parameters should be taken from the official Texas Instruments product datasheets and product pages for each orderable part number, and cross-checked against distributor listings such as DigiKey, Mouser, or TTI. Always confirm the exact orderable part number, package designator, and revision before design release.