AM26LV32CDR
Texas Instruments
- Lifecycle
- Active
- Stock
- 3036 PCS
- Package
- SOIC-16
- Series
- Interface - Condutores, Receptores, Transceivers
Esta comparação detalhada entre AM26LV32CDR e AM26LS33ACDR fornece informações valiosas sobre suas especificações e principais características. Abordamos fatores importantes em detalhes, incluindo conformidade com RoHS, status REACH, série, estilo de montagem, tipo de encapsulamento e outras características relevantes. Apresentar as diferenças lado a lado simplifica a seleção de componentes, facilitando a escolha da melhor opção para sua aplicação específica.
Replacement verdict
The AM26LV32CDR is a functional replacement candidate for the AM26LS33ACDR in 3.3 V low-voltage differential signaling applications, sharing the same quad differential receiver function and SOIC-16 footprint, but it is not a direct drop-in substitute because the two devices differ in supply voltage range, input differential threshold, and receiver input voltage tolerance. Designers must validate supply rail compatibility, input common-mode and differential thresholds, and fail-safe behavior against the target system requirements before substituting.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AM26LS33ACDR | AM26LV32CDR | Why it matters |
|---|---|---|---|
| Supply Voltage (VCC) | 5 V (4.75 V to 5.25 V) | 3.3 V (3.0 V to 3.6 V) | The two devices operate on different supply rails, so they are not drop-in replacements without adjusting the system power supply. |
| Function | Quad differential line receiver | Quad differential line receiver | Both are quad differential receivers, so the core signal-receiving function is equivalent, but electrical differences affect substitutability. |
| Input Sensitivity | ±200 mV | ±200 mV | Identical input sensitivity means both can detect the same small differential signals, preserving noise margin behavior. |
| Receiver Input Voltage Range | -7 V to +7 V | -0.3 V to VCC (3.6 V max) | The wider common-mode range of the AM26LS33ACDR allows it to tolerate larger ground offsets and fault conditions than the 3.3 V device. |
| Output Logic Level | 5 V TTL-compatible | 3.3 V LVTTL-compatible | Output levels must match the downstream logic family; mixing 5 V and 3.3 V outputs can cause interface incompatibility. |
| Propagation Delay | ~17 ns (typ) | ~15 ns (typ) | Similar propagation delays mean timing performance is largely preserved, though exact values differ slightly between the two parts. |
| Package | SOIC-16 (D) | SOIC-16 (D) | Identical package and pinout allow the parts to fit the same PCB footprint, simplifying physical substitution. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Matching temperature ranges ensure both parts are suitable for the same industrial environments. |
| Number of Receivers | 4 | 4 | Equal receiver count means the same number of differential channels can be handled, preserving system channel capacity. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AM26LV32CDR | AM26LS33ACDR |
|---|---|---|
| Part Status | Active | Active |
| Type | Receiver | Receiver |
| Protocol | RS422, RS485 | - |
| Number of Drivers/Receivers | 0/4 | 0/4 |
| Receiver Hysteresis | 50 mV | 50 mV |
| Voltage - Supply | 3V ~ 3.6V | 4.75V ~ 5.25V |
| Operating Temperature | 0°C ~ 70°C | 0°C ~ 70°C |
| Mounting Type | Surface Mount | Surface Mount |
The AM26LS33ACDR is a quad differential line receiver designed for 5 V operation with a wide common-mode input range of ±15 V, while the AM26LV32CDR is a quad differential line receiver optimized for 3.3 V operation with a common-mode input range of -0.2 V to 5.2 V. The AM26LS33ACDR is typically used in RS-422/RS-485 systems requiring high common-mode tolerance, whereas the AM26LV32CDR targets low-voltage, low-power applications.
Yes, both devices are offered in the same 16-pin SOIC package (D suffix) with identical pin assignments, allowing them to share the same PCB footprint. However, pin compatibility does not guarantee electrical compatibility, so supply voltage and input signal levels must be verified before substitution.
No. The AM26LV32CDR is specified for a 3.0 V to 3.6 V supply and is not rated for 5 V operation. Substituting it into a 5 V system would exceed its absolute maximum supply rating and is not supported by the manufacturer datasheet.
The AM26LS33ACDR operates from a single 5 V supply (typically 4.75 V to 5.25 V). The AM26LV32CDR operates from a 3.0 V to 3.6 V supply, making it suitable for 3.3 V logic systems.
The AM26LS33ACDR supports a common-mode input range of ±15 V, which provides high tolerance to ground potential differences in industrial RS-422/RS-485 networks. The AM26LV32CDR supports a common-mode input range of -0.2 V to 5.2 V, which is adequate for 3.3 V systems but not for applications with large ground offsets.
Both devices provide TTL-compatible outputs, but the output high level depends on the supply voltage. The AM26LS33ACDR output levels are referenced to a 5 V supply, while the AM26LV32CDR output levels are referenced to a 3.3 V supply. Logic-level compatibility with downstream devices must be checked in each case.
The AM26LS33ACDR is commonly used in 5 V RS-422/RS-485 industrial communication, motor control, and data acquisition systems requiring wide common-mode range. The AM26LV32CDR is used in 3.3 V low-power systems such as portable equipment, battery-powered devices, and 3.3 V logic-based communication interfaces.