Part A
AMC1300DWVR
Texas Instruments
- Lifecycle
- Active
- Stock
- 1951 PCS
- Package
- SOIC-8
- Series
- Linear - Amplifiers - Special Purpose
Replacement verdict
Compatible functional replacement candidate
The AMC1300BDWV and AMC1300DWVR are functionally equivalent isolated amplifiers sharing the same core architecture, gain, and input range, differing only in package form factor and reel packaging. The AMC1300DWVR is a valid functional substitute for the AMC1300BDWV where tape-and-reel assembly and the SOIC-8 wide-body footprint are acceptable.
Functional Architecture
High match
Input Voltage Range
High match
Package Type
Validation required
Operating Temperature
High match
Parts at a glance
Part B
AMC1300BDWV
Texas Instruments
- Lifecycle
- Active
- Stock
- 6086 PCS
- Package
- SOIC-8
- Series
- Linear - Amplifiers - Special Purpose
Key differences
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AMC1300BDWV | AMC1300DWVR | Why it matters |
|---|---|---|---|
| Manufacturer | Texas Instruments | Texas Instruments | Same manufacturer ensures consistent design, documentation, and quality processes. |
| Function / Type | Isolated amplifier (reinforced isolation) | Isolated amplifier (reinforced isolation) | Both serve the same signal-isolation function, making them functionally interchangeable. |
| Input Voltage Range | ±250 mV | ±250 mV | Defines the differential input span the amplifier can accept for shunt-based current sensing. |
| Isolation Rating | 5000 V RMS (reinforced) | 5000 V RMS (reinforced) | Determines the safety barrier capability for high-voltage measurement applications. |
| Supply Voltage | 3.0 V to 5.5 V (high side), 3.0 V to 5.5 V (low side) | 3.0 V to 5.5 V (high side), 3.0 V to 5.5 V (low side) | Compatible supply ranges allow the same board-level power design for either part. |
| Gain | 8.2 V/V (fixed) | 8.2 V/V (fixed) | Fixed gain determines the output scaling relative to the sensed input signal. |
| Bandwidth | 100 kHz | 100 kHz | Sets the maximum signal frequency the amplifier can accurately pass for control loops. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | Identical temperature ratings ensure equivalent reliability across industrial environments. |
| Package / Pin Count | 8-pin SOIC (DWV) | 8-pin SOIC (DWV), tape and reel | Same package footprint allows drop-in replacement; the difference is only in packing form (tube vs. tape and reel). |
| Packaging / Ordering Form | Tube | Tape and reel | Affects manufacturing handling and pick-and-place assembly; electrically the parts are equivalent. |
Need help validating a replacement?
Send your BOM and application constraints for technical and sourcing review.
Full specification comparison
Use manufacturer datasheets as the final authority.
| Specification | AMC1300DWVR | AMC1300BDWV |
|---|---|---|
| Part Status | Active | Active |
| Type | Isolation | Isolation |
| Applications | Current Sensing, Power Management | Current Sensing, Power Management |
| Mounting Type | Surface Mount | Surface Mount |
Frequently asked questions
What are the AMC1300BDWV and AMC1300DWVR?
Both are isolated amplifiers from Texas Instruments designed for shunt-based current sensing in high-voltage systems. They provide galvanic isolation between the high-voltage and low-voltage domains and are functionally identical, differing only in packaging and ordering quantity.
What is the difference between the AMC1300BDWV and AMC1300DWVR?
The AMC1300BDWV is supplied in a tube (rail) packaging, while the AMC1300DWVR is supplied in tape-and-reel packaging. Both use the same 8-pin SOIC (DWV) package and are electrically and functionally identical.
Are the AMC1300BDWV and AMC1300DWVR electrically interchangeable?
Yes. Both devices share the same die, pinout, and electrical specifications, including the ±250 mV input range, fixed gain of 8.2, and reinforced isolation rating. The only difference is the shipping packaging format.
What isolation rating do these devices provide?
Both the AMC1300BDWV and AMC1300DWVR are rated for reinforced isolation with a 5 kV RMS isolation voltage for 1 minute per UL 1577, and a 1500 V DC working voltage per VDE V 0884-11.
What is the input voltage range and gain of the AMC1300B?
The AMC1300B accepts a differential input voltage of ±250 mV and provides a fixed gain of 8.2, producing a differential output of ±2.05 V. This makes it suitable for shunt resistor-based current sensing.
What is the supply voltage requirement for the AMC1300BDWV and AMC1300DWVR?
Both devices require a high-side supply (VDD1) of 3.0 V to 5.5 V and a low-side supply (VDD2) of 3.0 V to 5.5 V. The two supplies are isolated from each other.
Which package do the AMC1300BDWV and AMC1300DWVR use?
Both devices use the 8-pin SOIC package with the DWV suffix, which is a wide-body SOIC with 5.85 mm creepage and clearance, supporting reinforced isolation requirements.
Can the AMC1300BDWV and AMC1300DWVR be used interchangeably in a design?
Yes. Since both parts are electrically identical and share the same package and pinout, they can be used interchangeably in the same PCB footprint. The choice between them depends only on the preferred packaging format for manufacturing.