AT24C04D-STUM-T

The AT24C04D-STUM-T is a type of EEPROM (Electrically Erasable Programmable Read-Only Memory) device from Microchip Technology. It provides a non-volatile memory solution with a storage capacity of 4K bits, organized as 512 x 8 bytes. The device operates using a standard I2C (Inter-Integrated Circuit) serial interface, making it suitable for applications requiring data storage and retrieval in embedded systems.
Key features include a wide operating voltage range from 1.7V to 5.5V, ensuring compatibility with a variety of microcontrollers. The AT24C04D-STUM-T supports a data transfer rate of up to 1 MHz in Fast-mode Plus, enhancing communication efficiency. Additionally, it offers low-power consumption benefits, with a standby current of less than 1 µA.
The chip is designed for high-reliability applications, offering over 1 million write cycles per byte and data retention of over 100 years. It is typically used in devices like consumer electronics, automotive systems, and industrial equipment to store configuration settings, calibration data, and other vital information. The "STUM-T" suffix denotes the package type and tape-and-reel packaging for automated assembly.

The AT24C04D-STUM-T is a 4Kb I2C EEPROM from Microchip. Equivalent products include:
1. 24LC04B from Microchip
2. M24C04-WMN6P from STMicroelectronics
3. CAT24C04 from ON Semiconductor
4. BR24C04F from ROHM Semiconductor
These alternatives provide similar EEPROM functionality, memory size, and I2C interface, though specific electrical characteristics and package options may vary. Always verify compatibility based on your application requirements.

The AT24C04D-STUM-T is a 4Kb CMOS serial EEPROM device from Microchip Technology, featuring I2C (Inter-Integrated Circuit) interface for communication. It operates with a voltage range of 1.7V to 5.5V, making it suitable for a variety of applications. The device supports byte-level and page-level write operations, with a page size of 16 bytes to optimize data writing efficiency.
Key features include a hardware write-protect pin to safeguard against inadvertent data modification, and a low-power standby mode to conserve energy. The device offers a maximum clock frequency of 1MHz for fast data transmission. Its operating temperature range is from -40°C to +85°C, which is ideal for industrial environments.
The AT24C04D-STUM-T is packaged in a compact 8-lead TSSOP (Thin Shrink Small Outline Package), ensuring it occupies minimal board space. It is designed for use in various applications, including consumer electronics, automotive systems, and industrial controls, where reliable non-volatile memory storage is essential.

The AT24C04D-STUM-T is a 4-Kilobit (512 x 8) Two-Wire Serial EEPROM from Microchip Technology. It comes in an 8-pin package. The pin functions are typically as follows:
1. A0, A1, A2: These are address pins used for multiple device addressing on the same bus.
2. GND: Ground pin.
3. SDA: Serial Data line, used for both data input and output.
4. SCL: Serial Clock line, used to synchronize data transmission.
5. WP: Write Protect pin, used to enable or disable write operations.
6. VCC: Power supply pin.
This EEPROM communicates over an I²C bus, allowing for efficient data storage and retrieval. The AT24C04D is designed for use in a wide range of applications including data logging, configuration settings storage, and other non-volatile memory needs.

The AT24C04D-STUM-T is manufactured by Microchip Technology Inc. Microchip is a leading provider of microcontroller, mixed-signal, analog, and Flash-IP solutions. The company offers a comprehensive portfolio of semiconductor products that are used in a wide range of applications, including automotive, industrial, consumer, aerospace, and communication sectors. Microchip specializes in embedded control solutions and provides a broad spectrum of services and support to its customers to help them design and deploy their products efficiently.

The AT24C04D-STUM-T is a 4Kb I2C serial EEPROM, commonly used for non-volatile data storage in various applications. Typical application areas include:
1. Consumer Electronics: Used for storing configuration settings and calibration data in devices like televisions, set-top boxes, and gaming consoles.

2. Industrial Automation: Employed in systems requiring data logging, configuration storage, and system calibration.
3. Telecommunications: Utilized for storing network configuration data and device settings.
4. Medical Devices: Suitable for storing patient data and device settings in portable medical equipment.
5. Automotive: Used for storing configuration and calibration parameters in automotive electronics systems.
Its small size, low power consumption, and I2C compatibility make it versatile for embedded system applications.

The AT24C04D-STUM-T is a type of EEPROM with a package type of SOT-23-5. This package is a small outline transistor with 5 leads, designed for surface mounting on circuit boards.