BR25H010FVM-2CTR

BR25H010FVM-2CTR is a 1-Mbit I2C serial EEPROM from ROHM (BR25H family). It provides non-volatile storage for microcontroller configuration, calibration data, IDs, and other small data blocks in embedded systems.
Key points:
- I2C two-wire interface for data and address; supports multiple devices on a bus using A0–A2 hardware address pins.
- Memory organization: about 128 KB (1 Mbit) of storage with random-access read/write.
- Features include page write capability, write-cycle control, and low-power operation.
- Suitable for automotive, industrial, and general consumer electronics where compact, reliable memory is needed.
- Package code “-2CTR” indicates a specific ROHM packaging variant suitable for compact PCB layouts.
Tip: Device address typically ranges with A0–A2 pins, e.g., 0x50–0x57 on the I2C bus, depending on hardware configuration. For exact electrical specs (voltage, timing, endurance, package dimensions), consult the BR25H010FVM-2CTR datasheet.

BR25H010FVM-2CTR is Rohm’s 1-Mbit I2C memory/FRAM. Closest equivalents: ST M24M01-W (1-Mbit I2C serial memory); Fujitsu MB85RS1MT (1-Mbit I2C FRAM). Other vendors offer similar 1-Mbit I2C memories—verify address scheme, page size, voltage, and packaging when substituting.

Key features of BR25H010FVM-2CTR:
- 1 Mbit FRAM memory (128 K × 8) for nonvolatile, fast writes
- I2C two–wire serial interface (SCL/SDA); standard and fast modes up to 400 kHz
- 24-bit addressing (3-byte memory address) for full memory access
- Page write (typical 16-byte pages) with auto-increment addressing
- Extremely high write endurance (≥10^14 write cycles); data retention >10 years
- Low power operation with standby mode
- Wide operating voltage: typically 1.8–3.6 V
- Industrial temperature range: -40°C to 85°C
- Write-protect input (WP) for write protection
- Compact package options suitable for small devices

- Pin count: 8 pins (8-pin package, SOP/US8)
- Function: 1 Mbit I2C serial EEPROM (non-volatile memory) with a two-wire I2C interface; includes address pins and write-protect.

- Manufacturer: ROHM Semiconductor (ROHM Co., Ltd.), a Japanese multinational company that designs and manufactures semiconductors and electronic components (ICs, memory, power devices, LEDs, sensors) for automotive, industrial, and consumer markets.

BR25H010FVM-2CTR is a serial (I2C/2‑wire) non-volatile memory device. Typical application areas:
- Stores configuration data, calibration constants, look-up tables, and device IDs for microcontroller-based systems.
- Used as firmware/parameter storage in embedded designs.
- Suitable for consumer electronics, automotive, industrial controls, IoT, meters, medical devices, and smart appliances.
- Beneficial where small footprint, low power, and reliable data retention are required.

8-pin SOP (SOIC-8) surface-mount package.