CAT24C16WI-GT3

The CAT24C16WI-GT3 is an EEPROM (Electrically Erasable Programmable Read-Only Memory) device produced by ON Semiconductor. It features a 16Kb (kilobit) memory capacity organized as 2048 x 8 bits. This EEPROM is commonly used in applications requiring non-volatile memory storage, where data retention is crucial even when the power is off.
Key features include an I²C interface, which provides efficient serial bus communication, and a wide voltage operating range from 1.8V to 5.5V, making it versatile for various applications. The device supports write protection via a hardware write-protect pin, ensuring data integrity by preventing unintended writes.
The CAT24C16WI-GT3 is available in a compact 8-pin SOIC (Small Outline Integrated Circuit) package, facilitating easy integration into circuit designs. It is suitable for consumer electronics, automotive applications, and industrial controls, where reliable data storage and retrieval are essential. The EEPROM guarantees data retention for over 100 years and supports over 1 million erase/write cycles, emphasizing its durability and longevity in various operating conditions.

The CAT24C16WI-GT3 is a 16Kb I2C Serial EEPROM. Equivalent products include:
1. Microchip 24LC16B
2. STMicroelectronics M24C16-WMN6P
3. Atmel/Microchip AT24C16
4. ON Semiconductor N24C16
These alternatives provide similar memory size and functionality, suitable for use in various applications requiring serial EEPROM. Always verify pin compatibility and specifications before substituting.

The CAT24C16WI-GT3 is a 16-Kb I²C Serial EEPROM Memory from ON Semiconductor. Key features include:
1. Memory Organization: 16 kilobits organized as 2048 x 8 bits.
2. Serial Interface: I²C (Inter-Integrated Circuit) bus-compatible, supporting standard (100 kHz), fast (400 kHz), and fast-plus (1 MHz) data transfer speeds.
3. Supply Voltage: Operates over a wide voltage range from 1.7V to 5.5V.
4. Low Power Consumption: Features standby and low-power active modes.
5. Data Retention: Provides greater than 100 years of data retention.
6. Endurance: Supports up to 1 million write cycles per byte.
7. Page Write Capability: Allows writing up to 16 bytes in a single operation.
8. Temperature Range: Suitable for industrial applications with a temperature range of -40°C to +85°C.
9. Package: Available in an 8-lead SOIC package.
These features make the CAT24C16WI-GT3 suitable for a broad range of applications requiring reliable and efficient non-volatile memory storage.

The CAT24C16WI-GT3 is an EEPROM (Electrically Erasable Programmable Read-Only Memory) chip. It belongs to the CAT24C16 series and is typically used for non-volatile storage in various electronic devices.
Pin Count: The CAT24C16WI-GT3 typically has 8 pins.
Functions of the Pins:
1. A0, A1, A2: These are address pins used to set the I2C address of the device, allowing for multiple devices to be used on the same bus.
2. GND: Ground pin, connected to the system ground.
3. SDA (Serial Data): This pin is used for the bidirectional transfer of data between the chip and the I2C bus.
4. SCL (Serial Clock): The clock pin used to synchronize the communication between the EEPROM and the controller.
5. WP (Write Protect): This pin is used to enable or disable write protection.
6. VCC: This is the power supply pin for the device.
The CAT24C16WI-GT3 operates using the I2C protocol, which allows for communication with a microcontroller to read from and write to the EEPROM.

The CAT24C16WI-GT3 is manufactured by ON Semiconductor, now known as onsemi. Onsemi is a semiconductor company that designs and manufactures a variety of electronic components. It provides a wide range of products including integrated circuits, discrete components, and sensors that are used in various applications across automotive, industrial, cloud power, and Internet of Things (IoT) sectors. The company focuses on energy-efficient innovations, aiming to address challenges related to energy consumption and sustainability.

The CAT24C16WI-GT3 is a 16Kb I2C CMOS Serial EEPROM, used primarily for data storage in various applications. It is commonly employed in consumer electronics for storing configuration settings and user preferences. In industrial systems, it is used for logging data and storing calibration information. In automotive systems, it is applied for keeping track of system parameters and vehicle-specific data. Additionally, it finds use in medical devices for storing patient records and device settings. Its low power consumption and small form factor make it suitable for portable and battery-operated devices.

The CAT24C16WI-GT3 is a 16Kb I2C Serial EEPROM, and the "WI" in the part number indicates it is available in an 8-lead SOIC package. This package type is surface-mount, making it suitable for compact and efficient PCB designs.