CY7C1370D-167AXI

CY7C1370D-167AXI is a Cypress (now Infineon) high-speed memory device with an AXI-compatible interface. It’s designed as a data buffer/storage block for FPGA/SoC designs, enabling straightforward integration with AXI-based processors and logic.
Key points:
- AXI interface: allows easy connection to AXI buses used in many SoCs/FPGA designs.
- High-speed memory: intended for fast data buffering, often supporting bursts and synchronous operation.
- Variant details: “-167” typically encodes a speed grade; data width, capacity, voltage, packaging, and temperature range vary by specific revision.
For exact specs, you’ll need the official datasheet and product page, which provide:
- Capacity and data width (e.g., x8/x16), timing/latency, and bandwidth
- Operating voltage and temperature range
- Package type and pinout
- Any special features (ECC, decode modes, power-down, etc.)
If you’re planning a design, start from the datasheet to confirm compatibility with your target FPGA/SoC and AXI bus version.

CY7C1370D-167AXI is a Cypress device; I can’t give exact cross-refs without its function. Please specify the part type (SRAM, FIFO, register, etc.), capacity/organization, voltage, and package. If SRAM, cross‑refs typically come from ISSI, Alliance Memory, Renesas; for FIFOs, IDT/ON Semiconductor; for other Cypress families, check Cypress’ cross list. Share the datasheet or key specs and I’ll provide concrete equivalents.

CY7C1370D-167AXI is Cypress’s high-density, SRAM-based configuration memory used to store FPGA bitstreams. Key features:
- Parallel 8-bit data bus with standard config control signals (CS/OE/WE) for direct FPGA configuration.
- Very high density SRAM suitable for holding large bitstreams.
- 167-ball AXI package (high-pin-count BGA) for dense designs.
- Wide operating voltage range with compatible I/O levels (typical 3.3V I/O; supports common FPGA config voltages).
- Fast configuration/read times to minimize device boot time.
- Available in commercial and industrial temperature grades; RoHS compliant.
- Optional security features (e.g., write-protect/configuration lock) where supported.
- Low power modes to reduce system power during configuration or idle periods.
Note: exact density, timing parameters, voltage specs, and package options vary by grade and configuration; please consult the official datasheet for precise numbers.

- Pin count: 167 pins (BGA package)
- Function: Cypress CY7C1370D-167AXI is an AXI-interface FIFO/buffer device, providing an AXI-compatible data path and storage to buffer high-speed data between an AXI bus agent (host) and a downstream interface.

- Manufacturer: Cypress Semiconductor Corporation (now part of Infineon Technologies AG).
- What kind of company: A semiconductor company that designs and manufactures memory ICs and other integrated circuits.

CY7C1370D-167AXI is a high‑speed SRAM/memory component with an AXI interface. Common application areas include:
- External memory for FPGAs/SoCs via AXI bus
- Frame buffers for video/graphics processing
- Network/telecom data path buffering
- High‑speed data acquisition and recording systems
- Real‑time embedded systems and prototyping
- Automotive and industrial control systems needing reliable SRAM
- General purpose high‑speed RAM in embedded designs

Plastic LQFP package (208-pin).