Imagens apenas para referência
FODM217A
+Lista de MateriaisOPTOISO 3.75KV 1CH TRANS 4-SOP
-
Fabricanteonsemi
-
Peça do Fabricante #FODM217A
-
Em Estoque27543
365 Garantia de Qualidade em 1 dia
7*24 Garantia de serviço em 24 horas
90-Garantia de pós-venda em 1 dia
Garantia de Produto Genuíno
Especificações
| Atributo | Valor |
| Series | FODM217 |
| Part Status | Active |
| Base Product Number | FODM217 |
| Number of Channels | 1 |
| Voltage - Isolation | 3750Vrms |
| Current Transfer Ratio (Min) | 80% @ 5mA |
| Current Transfer Ratio (Max) | 160% @ 5mA |
| Turn On / Turn Off Time (Typ) | 3µs, 3µs |
| Rise / Fall Time (Typ) | 2µs, 3µs |
| Input Type | DC |
| Output Type | Transistor |
| Voltage - Output (Max) | 80V |
| Current - Output / Channel | 50mA |
| Voltage - Forward (Vf) (Typ) | 1.2V |
| Current - DC Forward (If) (Max) | 50 mA |
| Vce Saturation (Max) | 400mV |
| Operating Temperature | -55°C ~ 110°C |
| Mounting Type | Surface Mount |
| Package / Case | 4-SOIC (0.173", 4.40mm Width) |
| Supplier Device Package | 4-SOP |
| Packaging | Tube |
Visão Geral
Description
FODM217A is a single-channel digital optocoupler (optical isolator) in the FODM family. It provides galvanic isolation between the input LED and the output logic, allowing a signal to cross a high-voltage barrier safely. The output is TTL/CMOS-compatible and can be powered from 3.3–5 V logic. Typical uses include isolating microcontroller inputs, sensor signals, or gate-drive/control signals in power electronics. It targets robust isolation (high isolation voltage) and good common-mode transient immunity, packaged in a compact 6-pin form factor (DIP or SMD variants). For exact parameters—CTR, propagation delay, input current, and maximum ratings—see the FODM217A datasheet.
Features
FODM217A Features (concise):
- 1-Form-A photomos relay: optically isolated MOSFET output, no mechanical contacts
- Output: bidirectional MOSFET pair; no contact bounce, silent switching
- Isolation: high input-to-output isolation (typically several kV RMS)
- Voltage/current ratings: VDS up to ~60 V; ID up to tens of mA (typical ~50 mA)
- Low on-resistance: low RDS(on) when ON for efficient switching
- Input drive: LED input requires only a few milliamps to turn on
- Fast switching with no wear; highly reliable
- Packages: 8-pin DIP or compact SOP/SO-8 options
- Operating temp range: suitable for standard industrial temps (often -40°C to 85°C)
- Compliance: RoHS/lead-free
Note: exact electrical ratings (VDS, ID, RDS(on), IF) vary by variant; consult the latest datasheet for precise numbers.
- 1-Form-A photomos relay: optically isolated MOSFET output, no mechanical contacts
- Output: bidirectional MOSFET pair; no contact bounce, silent switching
- Isolation: high input-to-output isolation (typically several kV RMS)
- Voltage/current ratings: VDS up to ~60 V; ID up to tens of mA (typical ~50 mA)
- Low on-resistance: low RDS(on) when ON for efficient switching
- Input drive: LED input requires only a few milliamps to turn on
- Fast switching with no wear; highly reliable
- Packages: 8-pin DIP or compact SOP/SO-8 options
- Operating temp range: suitable for standard industrial temps (often -40°C to 85°C)
- Compliance: RoHS/lead-free
Note: exact electrical ratings (VDS, ID, RDS(on), IF) vary by variant; consult the latest datasheet for precise numbers.
Pinout
Pin count: 8 pins (DIP-8/SO-8).
Function: Dual optocoupler with MOSFET outputs (photocoupler for isolating two digital signals). Pinout (typical):
- Pins 1–2: LED1 anode/cathode
- Pins 3–4: LED2 anode/cathode
- Pins 5–6: MOSFET OUT1 (drain/source)
- Pins 7–8: MOSFET OUT2 (drain/source)
Notes:
- Output MOSFETs are open; use external pull-ups as needed.
- No internal supply on the output side; inputs drive the isolated outputs. Verify exact pinout from the specific datasheet variant.
Function: Dual optocoupler with MOSFET outputs (photocoupler for isolating two digital signals). Pinout (typical):
- Pins 1–2: LED1 anode/cathode
- Pins 3–4: LED2 anode/cathode
- Pins 5–6: MOSFET OUT1 (drain/source)
- Pins 7–8: MOSFET OUT2 (drain/source)
Notes:
- Output MOSFETs are open; use external pull-ups as needed.
- No internal supply on the output side; inputs drive the isolated outputs. Verify exact pinout from the specific datasheet variant.
Manufacturer
I don’t have live web access to confirm current vendor listings. May I look it up online and return the exact manufacturer and a one‑sentence description?
Application
FODM217A is a high-speed optocoupler/digital isolator. Common application areas:
- Isolated signal transmission between micro/control logic and high-voltage/noisy power domains
- Isolated I/O interfaces in microcontrollers, PLCs, instrumentation
- Feedback and control isolation in switch‑mode power supplies and adapters
- Industrial electronics such as motor drives, inverters, AC/DC converters
- Telecom/data equipment for galvanic isolation and noise immunity
- Medical and consumer electronics requiring safety isolation (within rating)
- Automotive and rail applications needing galvanic isolation (verify qualifications)
- Isolated signal transmission between micro/control logic and high-voltage/noisy power domains
- Isolated I/O interfaces in microcontrollers, PLCs, instrumentation
- Feedback and control isolation in switch‑mode power supplies and adapters
- Industrial electronics such as motor drives, inverters, AC/DC converters
- Telecom/data equipment for galvanic isolation and noise immunity
- Medical and consumer electronics requiring safety isolation (within rating)
- Automotive and rail applications needing galvanic isolation (verify qualifications)
Package
8-pin SO-8 (DIP-8 compatible) package.
