Imagens apenas para referência
GT24C08B-2ZLI-TR
+Lista de MateriaisEEPROM Serial I2C 8Kb 1MHz TSSO
-
FabricanteGiantec Semiconductor, Inc.
-
Peça do Fabricante #GT24C08B-2ZLI-TR
-
Em Estoque25437
365 Garantia de Qualidade em 1 dia
7*24 Garantia de serviço em 24 horas
90-Garantia de pós-venda em 1 dia
Garantia de Produto Genuíno
Especificações
| Atributo | Valor |
| Part Status | Active |
| Memory Type | Non-Volatile |
| Memory Format | EEPROM |
| Technology | EEPROM |
| Memory Size | 8Kbit |
| Memory Organization | 1K x 8 |
| Memory Interface | I2C |
| Clock Frequency | 1 MHz |
| Write Cycle Time - Word, Page | 5ms |
| Voltage - Supply | 1.7V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173", 4.40mm Width) |
| Supplier Device Package | 8-TSSOP |
| Packaging | Tape & Reel (TR) |
| Access Time | 400 ns |
Visão Geral
Description
GT24C08B-2ZLI-TR is a Giantec 8‑Kbit I2C serial EEPROM. It provides 1024 bytes of non-volatile storage accessible over the I2C two‑wire bus.
Key features
- 1024 × 8 organization; 8‑pin package with A0–A2 address pins for device selection
- Supply: typically 1.8–5.5 V
- I2C interface: standard mode (100 kHz) and fast mode (400 kHz)
- Page write up to 16 bytes; random and sequential read
- Write cycle typically ~5 ms
- Endurance ~1e6 write cycles; data retention > 100 years
Packaging
- -TR indicates Tape-and-Reel; -2ZLI is the package code
Applications
- Small, low-power data storage for microcontrollers, calibration/config data, and firmware/config data storage.
Key features
- 1024 × 8 organization; 8‑pin package with A0–A2 address pins for device selection
- Supply: typically 1.8–5.5 V
- I2C interface: standard mode (100 kHz) and fast mode (400 kHz)
- Page write up to 16 bytes; random and sequential read
- Write cycle typically ~5 ms
- Endurance ~1e6 write cycles; data retention > 100 years
Packaging
- -TR indicates Tape-and-Reel; -2ZLI is the package code
Applications
- Small, low-power data storage for microcontrollers, calibration/config data, and firmware/config data storage.
Equivalent
GT24C08B-2ZLI-TR is an 8‑Kbit I2C serial EEPROM. Common equivalents include:
- NXP CAT24C08 (and CAT24C08B/C)
- ST M24C08 (and M24C08-W)
- Microchip 24AA08/24LC08/24C08
- Winbond W24C08
- Fudan Micro FM24C08
- ROHM BR24C08
Note: verify voltage, package, and I2C addressing/pinout when substituting.
- NXP CAT24C08 (and CAT24C08B/C)
- ST M24C08 (and M24C08-W)
- Microchip 24AA08/24LC08/24C08
- Winbond W24C08
- Fudan Micro FM24C08
- ROHM BR24C08
Note: verify voltage, package, and I2C addressing/pinout when substituting.
Pinout
- Pin count: 8 pins (8-pin package, e.g., SO8)
- Function: 8K-bit serial I2C EEPROM. Pins include VCC, GND, SDA, SCL, WP (write protect), and three address inputs A0–A2 for device addressing. The device stores data accessible via I2C.
- Function: 8K-bit serial I2C EEPROM. Pins include VCC, GND, SDA, SCL, WP (write protect), and three address inputs A0–A2 for device addressing. The device stores data accessible via I2C.
Manufacturer
Manufacturer: Giantec Semiconductor Co., Ltd. (Giantec).
Company type: A semiconductor company that designs and sells memory ICs, specializing in I2C serial EEPROM products (memory solutions for various applications).
Company type: A semiconductor company that designs and sells memory ICs, specializing in I2C serial EEPROM products (memory solutions for various applications).
Application
GT24C08B-2ZLI-TR is a 8Kbit I2C serial EEPROM. Typical applications include:
- Embedded systems needing non-volatile storage for configuration, calibration data, device IDs, and user settings
- Data logging and event storage in portable or industrial equipment
- Firmware/configuration storage in consumer electronics (set-top boxes, TVs, peripherals)
- Automotive/industrial control modules for parameter storage across power cycles
- Medical devices for calibration data and patient-specific settings
- Networking gear and sensors requiring small, reliable non-volatile parameter memory
Note: Uses I2C bus for easy system integration.
- Embedded systems needing non-volatile storage for configuration, calibration data, device IDs, and user settings
- Data logging and event storage in portable or industrial equipment
- Firmware/configuration storage in consumer electronics (set-top boxes, TVs, peripherals)
- Automotive/industrial control modules for parameter storage across power cycles
- Medical devices for calibration data and patient-specific settings
- Networking gear and sensors requiring small, reliable non-volatile parameter memory
Note: Uses I2C bus for easy system integration.
Package
An 8-pin SOP (SOIC) surface-mount package, supplied in tape-and-reel.