IDT79RC64V475-200DP

IDT79RC64V475-200DP is a dual-port static RAM from Integrated Device Technology (IDT), part of the RC64V family. It provides two independent memory ports (A and B) for concurrent access, enabling shared memory between two controllers without contention. Organization is 64K x 4 per port (256K bits per port) with separate address/data/control buses for each port. The -200 indicates a 200 ns access time; the -DP suffix denotes a dual-port device/package. Features typically include independent CE, OE, WE for each port and asynchronous operation with TTL/CMOS-compatible I/O. Common applications include inter-processor buffering, video/frame buffers, and other shared-memory or buffering roles in embedded systems. Power and I/O levels are per the datasheet (often 5V), with exact values and packaging specified there. For precise electrical characteristics, pinout, timing, and packaging, consult the IDT datasheet for this exact revision.

I can’t give exact cross-references without specs. Please confirm:
- memory type (likely SRAM)
- organization (e.g., 64K × 4)
- speed (-200 = 200 ns)
- supply voltage
- package (DP)
With these, I’ll list exact equivalents from TI, Cypress, Renesas, etc.

Key features of IDT79RC64V475-200DP (typical):
- 64K x 4-bit dual-port static RAM
- Two independent ports (Port A and Port B) with separate addresses, data I/O, and control signals
- 5V single-supply operation
- Access time: 200 ns (typical/max depending on variant)
- Bidirectional data buses with tri-state outputs for bus sharing
- Per-port control: Chip Enable (CE), Output Enable (OE), and Write Enable (WE)
- TTL/CMOS-compatible inputs; suitable for standard memory-mapped interfaces
- Available in dual-port packaging (DP variant), e.g., 200-pin dual-port DIP/related package
Note: Exact specifications (temperature range, package options) can vary by lot/revision; always consult the specific datasheet for the version you’re using.

208 pins. It is a dual-port static RAM with a 64K × 4 organization (two independent access ports for simultaneous read/write).

- Manufacturer: Integrated Device Technology (IDT), now a subsidiary/brand of Renesas Electronics Corporation.
- What kind of company: A semiconductor company that designs and manufactures integrated circuits (memory, timing, interface, and related ICs) for computing, networking, and consumer electronics. Renesas is a Japanese multinational semiconductor maker.

Common application areas for IDT79RC64V475-200DP (a high-speed dual-port memory/register device):
- Data buffering between fast peripherals and processors (FIFO/dual-port RAM)
- Memory expansion and register file for microcontrollers/DSPs
- Clock-domain crossing and bus interface bridging
- Video/audio buffering and timing alignment
- Telecom/network equipment (line cards, switches, routers)
- Industrial automation and instrumentation
- Embedded systems requiring deterministic, low-latency memory access

200-pin DIP (dual-in-line plastic package).