IS25LP128F-RMLA3

Imagens apenas para referência

IS25LP128F-RMLA3

+Lista de Materiais

IC FLASH 128MBIT SPI/QUAD 16SOIC

365 Garantia de Qualidade em 1 dia

7*24 Garantia de serviço em 24 horas

90-Garantia de pós-venda em 1 dia

Garantia de Produto Genuíno

Especificações

Atributo Valor
Package / Case Tube
Series Automotive, AEC-Q100
Part Status Obsolete
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR
Memory Size 128Mb (16M x 8)
Memory Interface SPI - Quad I/O, QPI, DTR
Clock Frequency 166 MHz
Write Cycle Time - Word Page 800µs
Voltage - Supply 2.3V ~ 3.6V
Operating Temperature -40°C ~ 125°C (TA)
Mounting Type Surface Mount

Visão Geral

Description

IS25LP128F-RMLA3 is a high-density serial NOR flash memory from ISSI (128 Mbit) intended for embedded systems. It stores firmware and data and is accessed via a serial peripheral interface (SPI), with support for standard SPI as well as high-speed dual/quad I/O modes to boost throughput. Key features include 2.7–3.6 V operation, 256-byte page programming, sector (and block) erase, fast read commands, and typical protection/write-enable mechanisms plus deep power‑down for low current when idle. It supports JEDEC ID reads and security features for device protection. Typical uses are boot code storage and application firmware, plus data logging in microcontroller-based designs. The -RMLA3 suffix denotes the specific packaging/variant (lead-free/RoHS-compliant and a particular package code and temperature range); for exact package pins, timing, and command set, consult the ISSI datasheet.

Equivalent

Equivalent 128-Mbit SPI flash memories from other vendors include: Winbond W25Q128FV/JV; Macronix MX25L12845G; Spansion/Cypress S25FL128P/S25FL128S; GigaDevice GD25Q128C; Micron N25Q128A; EtronTech EN25QH128A. Note: voltage, speed, dual/quad-SPI and security features differ; verify datasheet compatibility. -RMLA3 is a packaging/revision code, so choose a compatible package.

Features

IS25LP128F-RMLA3 features:
- 128 Mbit (16 Mbyte) serial flash memory
- 2.7–3.6 V operation; industrial temp range (-40 to 85 C)
- SPI-compatible interface with Dual/Quad I/O support; 3-byte addressing
- High-speed read up to 104 MHz (Dual/Quad I/O modes)
- 256-byte page program; random access
- Erase: sector, block, and full-chip erase (typical 4 KB sectors, 64 KB blocks)
- Data retention ~20 years; endurance ~100k program/erase cycles
- Deep power-down mode; low active current
- Hardware write protection and block-protection registers
- 8-pin package (RMLA3), RoHS-compliant

Pinout

- Pin count: 8 pins (8-pin package, e.g., SOIC-8)
- Function: IS25LP128F-RMLA3 is a 128-Mbit serial SPI flash memory. Pinout typically includes VCC, GND, CS (chip select), CLK (SCK), DI (MOSI), DO (MISO), WP# (write protect), and HOLD#. It uses standard SPI (and supports WP/HOLD for protection and bus hold).

Manufacturer

- Manufacturer: Integrated Silicon Solution, Inc. (ISSI).
- Company type: A US-based fabless semiconductor company that designs and markets memory products (such as Serial NOR flash, DRAM, and SRAM) and uses external foundries to fabricate its chips.

Application

IS25LP128F-RMLA3 is a 128‑Mbit serial SPI flash memory used as non-volatile storage for firmware and data in embedded systems. Typical applications include:
- Firmware storage, boot code, and updates for microcontrollers and application processors
- Code and data storage in consumer electronics (set-top boxes, digital cameras, printers, TVs)
- Networking/communication equipment (routers, modems, switches)
- Automotive and industrial control systems (ECUs, HMIs, sensors)
- Data logging and portable storage devices
- General low-pin-count SPI flash storage for embedded systems

Package

An 8-pin SOIC (small-outline) package.

Produtos relacionados a IS25LP128F-RMLA3

  • Orçamento Rápido

  • Envie sua solicitação de orçamento para IS25LP128F-RMLA3 Use este formulário. Responderemos em até 12 horas.