LT3080EDD-1#TRPBF

The LT3080 is a simple, adjustable 1.1 A linear regulator with an internal 50 µA reference that lets you set the output with a single resistor on the ISET pin. The LT3080EDD-1#TRPBF is this device in the EDD package, with Tape-and-Reel Pb-Free packaging (the “-TRPBF” suffix).
Key points
- Output is set by a single resistor from ISET to ground; easy two-part solution for adjustable supplies.
- Wide input range and high current: suitable for bench supplies and post-regulation stages.
- Includes protection features (current limit and thermal shutdown) for robust operation.
- Can be used as a traditional voltage regulator or as a simple current source in appropriate circuits.
- Requires only basic external components (primarily the resistor for Vout; output capacitor for stability).
Common uses
- Adjustable output power supplies
- Post-regulation stages in supply architectures
- Simple, programmable current sources
Packaging note
- EDD-1 indicates the specific package variant; TRPBF denotes Tape-and-Reel Pb-Free packaging. For exact pinout and capacitor requirements, consult the LT3080 datasheet and the packaging document for LT3080EDD-1#TRPBF.

LT3080EDD-1#TRPBF Features (concise):
- 1.1 A adjustable positive linear regulator.
- External resistor (RSET) sets Vout via ISET reference (ISET ≈ 10 µA): Vout = ISET × RSET.
- Wide input range up to about 36 V.
- Output voltage adjustable from near 0 up to Vin (no trimming required).
- Simple design: only a single resistor needed to set Vout; no external op-amp/compensation.
- Built-in protections: current limit and thermal shutdown.
- Can be used as both a voltage regulator and a current regulator with simple configurations.
- Pb-free, Tape & Reel packaging in 8-lead LT3080EDD-1#TRPBF.

- Manufacturer: Analog Devices, Inc. (ADI). The LT3080 was originally from Linear Technology, which is now part of Analog Devices after the acquisition.
- Company type: A multinational American semiconductor company that designs, develops, manufactures, and markets analog, mixed-signal, and digital signal processing (DSP) integrated circuits and related technologies.

- Adjustable, low-noise linear regulator (up to about 1.1 A) for single-rail supplies.
- Programmable current source/sink for LEDs, sensors, and test loads.
- Post-regulation stage after switching regulators to improve ripple and transient response.
- Battery-powered/portable devices with a wide input range and good efficiency.
- Bench/test equipment and instrumentation rails needing a precise, flexible supply.
- Power-management blocks in telecom/industrial gear requiring multiple rails from a common source.

8-pin MSOP (small-outline) package. Pb-free and supplied in Tape-and-Reel (TRPBF) packaging.