M24C16-FMC6TG

The M24C16-FMC6TG is a 16-Kbit I²C-compatible Serial Electrically Erasable Programmable Read-Only Memory (EEPROM) from STMicroelectronics. It is designed for applications requiring non-volatile storage of data, such as configuration parameters, settings, or user data. The EEPROM operates over a voltage range from 1.7 V to 5.5 V and is organized as 2,048 x 8 bits.
Key features include a two-wire I²C interface, which supports both Standard Mode (100 kHz) and Fast Mode (400 kHz) communication. The M24C16-FMC6TG also incorporates a byte and page write capability of up to 16 bytes, ensuring efficient data handling and storage. The device offers high reliability with an endurance of up to 1 million write cycles and data retention of more than 40 years.
Packaged in a standard 8-lead TSSOP, it is suitable for various industrial and consumer applications. The device also supports write protection via a hardware pin, enhancing data security.

The M24C16-FMC6TG is a 16Kb I2C-compatible Serial EEPROM by STMicroelectronics. Equivalent products include:
1. Microchip 24LC16B – A 16Kb I2C Serial EEPROM.
2. Atmel/Microchip AT24C16 – Another 16Kb I2C EEPROM.
3. ON Semiconductor CAT24C16 – A similar 16Kb I2C EEPROM.
4. NXP PCA24S08 – Offers similar EEPROM functionality.
These products are functionally similar, offering 16Kb storage and I2C interface compatibility. Always verify pin configurations and electrical characteristics for compatibility with your application.

The M24C16-FMC6TG is a serial EEPROM memory chip that provides 16 Kbits of storage capacity organized as 2,048 x 8 bits. It operates on a supply voltage range of 1.7 V to 5.5 V, making it suitable for a variety of applications. The device features an I2C interface, supporting both standard (100 kHz) and fast (400 kHz) modes, which allows for efficient communication with microcontrollers or other control devices.
With a low power consumption design, the M24C16-FMC6TG minimizes energy usage during both read and write operations. Write protection is possible through a hardware pin or software commands, enhancing data security. The chip's endurance is rated for 1 million write cycles, and it can retain data for more than 40 years.
Additionally, the package type is a DFN8 (2x3 mm), ideal for compact design requirements. This EEPROM is typically used in consumer electronics, industrial automation, and other applications requiring reliable, non-volatile memory storage.

The M24C16-FMC6TG is a 16-Kbit I²C-compatible serial EEPROM. It features an 8-pin configuration, which is standard for such EEPROM devices. Here's a brief overview of the pin functions:
1. A0, A1, A2: These are the device address inputs. They are used to set the I²C address of the EEPROM, allowing multiple devices to be used on the same bus.
2. VSS: This is the ground pin.
3. SDA: The Serial Data pin is used for both input and output of data. It is an open-drain output and requires a pull-up resistor.
4. SCL: The Serial Clock pin is used to synchronize the communication between the EEPROM and the controller.
5. WP: The Write Protect pin. When connected to VCC, it disables all write operations, providing hardware data protection.
6. VCC: This is the power supply pin for the EEPROM.
These pins support the operation of the EEPROM in a standard I²C bus configuration, enabling read and write operations via the two-wire protocol.

The M24C16-FMC6TG is manufactured by STMicroelectronics. STMicroelectronics is a leading global semiconductor company that designs, develops, manufactures, and markets a wide range of semiconductor products and solutions. The company operates in various segments including automotive, industrial, personal electronics, and communications equipment. STMicroelectronics is known for its expertise in microcontrollers, sensors, analog and mixed-signal products, and power management technologies. With a focus on innovation and sustainability, STMicroelectronics aims to provide energy-efficient and technologically advanced solutions to its customers worldwide.

The M24C16-FMC6TG is a 16Kb EEPROM memory chip, primarily used in applications requiring reliable and non-volatile data storage. Its key application areas include:
1. Consumer Electronics: Storing configuration settings and user preferences.
2. Industrial Automation: Retaining calibration data and system parameters.
3. Automotive: Managing small amounts of critical data such as mileage logs.
4. Communication Devices: Storing network configurations and user settings.
5. Medical Equipment: Maintaining device calibration settings.
6. IoT Devices: Ensuring data retention during power loss for various sensors.
Its I2C interface and small size make it versatile for many embedded systems requiring low-power data retention.

The M24C16-FMC6TG is a 16Kb I2C serial EEPROM manufactured by STMicroelectronics. It comes in a TSSOP-8 package, which is a Thin Shrink Small Outline Package with 8 leads.